View 5-1532137-5_107359.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MICRODOT Connectors Table of Contents
Microdot Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Microminiature D Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-35 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 MCK/MCD/MCDM Series Metal and Plastic Shell Connectors . . . . . . . . . . . . . . . . . . . . . . 6 How To Specify MCK and MCD Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 MCK Series Metal Shell Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 MCK Series Metal Shell Connectors Panel Mounting -- Cutout Dimensions . . . . . . . . . . 10 MCD Series Plastic Shell Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11, 12 MCD Series Plastic Shell Connectors Panel Mounting -- Cutout Dimensions . . . . . . . . . 13 Mounting and Coupling Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15 MCK Transition Blocks RT1 -- Right Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-18 ST1 -- Straight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-21 MCK ST2 Series Straight Mount PCB Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-24 MCDM Series Metal Shell Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 26 MCDM Series Metal Shell RF COMBOMATE Connectors . . . . . . . . . . . . . . . . . . . . . . 27-29 MCDM Series Metal Shell Connectors Panel Mounting -- Cutout Dimensions . . . . . . . . 30 MIL-DTL-83513 Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-35 Rectangular Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-54 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 TWIST Pin Contact Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 MCE Plastic MCE Series Plastic Shell Edgeboard Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-41 Technical & Performance Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Mother Board & Daughter Board Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 How To Specify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 MCEM Metal Shell MCEM Series Metal Shell Edgeboard Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . 42-45 Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 128 Layout Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43, 44 How To Specify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 184 Layout Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 MCJ Plastic MCJ Series Plastic Shell Center Jackscrew Connectors . . . . . . . . . . . . . . . . . . . . . 46, 47 10 & 14 Layout Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 26, 38 & 46 Layout Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 How To Specify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 MCJM Metal Shell MCJM Series Metal Shell Center Jackscrew Connectors. . . . . . . . . . . . . . . . . . 46, 48, 49 Technical & Performance Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Plug & Receptacle Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 49 How To Specify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 1
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
MICRODOT Connectors Table of Contents (Continued)
MCS .050 [1.27] Centerline MCS Series Strip Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Strip Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 How To Specify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 High Density Standard Module (HDSM) Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . 51-54 Circular Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57-92 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 56 MARC 43 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Materials and Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Service & Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Test Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Part Number & Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Polarizing Key Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Shell Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-62 Cable Clamps, Contacts, Sealing Plugs, Protective Covers & Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 MARC 53 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Materials and Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Service & Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Test Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Part Number & Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Polarizing Key Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Shell Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69-71 Test Adapters, Protective Covers, Cable Clamps & Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 73 MARC 63 Performance Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Part Number & Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Shell Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75, 76 Cable Clamps, Protective Covers & Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MARC 43, 53, 63 Contacts & Sealing Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78-80 MARC 43, 53, 63, 73 Assembly Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 MARC 73 Service & Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 83 Part Number & Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Shell Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 85 Cable Clamps, Contacts & Sealing Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85, 86 MQR Series - Microminiature Circular Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . 87, 88 MTC Series - Microminiature Circular Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 90 2
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
MICRODOT Connectors Table of Contents (Continued)
Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91-136 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Standard Coaxial Connectors Performance Data/Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Screw-On Series (S) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93-98 Slide-On Series (SOS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99-102 Quick-Connect Series (QC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103-105 Twinax Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Triax Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Terminals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Module Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Caps For Screw-On Jacks and Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Feed Thru Adapters, Screw-On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 BNC/TNC Adapters to: Screw-On Series (S) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110, 111 Slide-On Series (SOS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Quick-Connect (QC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Gold Plated Crimp Style Coaxial Connectors Performance Data/Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Screw-On Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113-116 Assembly Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 LEPRA/CON Ultra Miniature Connectors Performance Data/Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 Screw-On Series -- Standard Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118, 119 Screw-On Series -- Locking Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120, 121 Slide-On Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122, 123 Assembly Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 BNC / LEPRA/CON Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124, 125 Snap-Lock Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 Cable Assemblies Ordering Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 Mating Interface Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 Cable Acceptance Dimensions Standard Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129-133 Gold Plated Crimp Style Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133, 134 LEPRA/CON Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 Hermetic Connectors Coaxial Screw-On, Slide-On Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135, 136
3
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
MICRODOT Connectors MICRODOT Introduction
MICRODOT Connector products have a fifty-year heritage of leadership in precision design and manufacturing of innovative and cost-effective interconnects. These innovative and costeffective products offer interconnect solutions for a broad range of applications in the Aerospace, Military, Medical, Instrumentation, Communications and Computer markets. The MICRODOT reputation for hands-on experienc and outstanding technical support is now enhanced as part of Tyco Electronics Corporation. From standard Mil-Spec configurations to custom designs, we have the Micro-D, subminiature and ultra-miniature coaxial, custom hermetic and space-related cylindrical connectors to meet your need, whether it is build-toprint assemblies, or total turn-key assembly program management. MICRODOT connectors have met the rigorous demands imposed in manned space flight, military and commercial satellites, critical medical applications, and geophysical exploration.
4
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors Microminiature D Connectors
Microminiature D Connectors
Product Facts
I I
Designed for both military and commercial applications Low engaging force is achieved by the manner in which Twist Pin Contacts are designed The metal shell and plastic shell are available with solder cup and solid or stranded wire terminations Mating force maximum is 10 oz. [2.78N] times the number of contacts Durability -- No known mechanical or electrical issues detrimental to the function of the connectors after 500 cycles of mating and unmating Current Rating -- 3 amps max per contact
I
1
I
I
I
MICRODOT Connectors MCK and MCD High Density Microminiature "D" Connectors described in this catalog comprise a complete connector system, which is adaptable to a numerous variety of form factors. Low engaging force is achieved by the manner in which the twist pin contacts are designed. By constructing the male contact as a breathing helical spring, electrical contact is achieved at many points around the periphery of the pin bundle rather than at a few discrete points, as in conventional pin designs. Normal twist
pin engagement force is 6 oz. [1.67N] typically and 8 oz. [2.22N] maximum. The low force twist pins exhibit an engaging force of 4 oz. [1.11N] typically and 5 oz. [1.39N] maximum. Low force twist pins are standard in MIL-DTL-83513 configurations of MCK and MCD connectors and may be supplied as an option in all other configurations. The MCK and MCD Series of connectors featured in this catalog are designed to meet the applicable requirements of MlL-DTL-83513, for intermateability, interchangeability, and
performance. Designed for both military and commercial applications, the MCK's and MCD's are especially well suited for use in miniaturized airborne and space electronics, computers, and test equipment. The metal shell MCK's and plastic shell MCD's are available with solder cup, and solid or stranded wire terminations. MCK transition blocks are standard for printed circuit board mounting. Custom termination configurations for both MCK and MCD can be accommodated. Micro D's are also supplied in wired harness assemblies.
5
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MCK/MCD/MCDM Series Metal and Plastic Shell Connectors Technical and Performance Data (Applicable to MCK, MCD and MCDM unless otherwise noted)
Electrical
Contacts -- Pin 24 AWG twist pin, Socket 24 AWG precision machined barrel, Wire Range 24 AWG to 30 AWG solid and stranded. Contact Resistance -- (voltage drop) 25 millivolts max. at 3 amps, 77 7.4F [25 3 C]. Current Rating -- 3 amps max. per contact. Dielectric Withstanding Voltage -- Volts RMS 60 Hz at room ambient. At sea level 600V solder pots, 750V wire terminations & transition blocks. At 70,000 ft. [21,336 m] 150V solder pots, 200V wire terminations & transition blocks. Insulation Resistance -- 5,000 megohms min. (@ 500 VDC) at ambient room temperature. Magnetic Permeability -- 2 mu max.
Environmental
Temperature Range -- -67F to 257F [-55 C to +125C] for MCK/MCD, -67F to 302F [-55C to +150C] for MCDM. Vibration -- No discontinuity in excess of 1 sec. when tested in accordance with MIL-STD-1344, Method 2005, test Condition IV. Solderability -- Connectors shall pass the test requirements of MIL-STD202, Method 208 Shock -- No discontinuity in excess of 1 sec. when tested in accordance with MIL-STD-1344, Method 2004, test Condition E. Durability -- No mechanical or electrical defects detrimental to the function of the connectors after 500 cycles of mating and unmating. Humidity -- After exposure to humidity as specified by MIL-STD-1344, Method 1002, Type II, IR shall be 1 megohm min. following step 7a of Method 1002 and 1000 megohms min. after 24 hours of conditioning per Method 1002. Salt Spray -- Connectors shall meet the performance requirements of contact resistance, mating and unmating forces, and contact retention after being subjected to the 48-hour 5% solution salt spray test per MIL-STD-1344, Method 1001, Condition B. Fluid Immersion -- Unmated connectors after being fully immersed in one of the following fluids, for the prescribed time, will mate at a force of 10 oz.
[2.78N] times the number of contacts or less: Perchloroethylene, 2 hours; Lubricating oil per MIL-L-23699, 20 hours. Insert Retention -- Inserts will withstand a 50 lb. [34N/cm2] per square inch load in either direction. Crimp Termination Tensile Strength -- (Unassembled contacts with crimped stranded wire terminations) Wires will not pull out of contacts when the following axial loads are applied: 24 AWG, 5 lbs. [22.24N]; 26 AWG, 4 lbs. [17.79N]; 28 AWG, 3 lbs. [13.34N] Outgassing -- When tested in accordance with SP-R-0022, Total Mass Loss (TML) shall be less than 1.0% and Volatile Condensable Material (VCM) shall be less than 0.1% of the original specimen.
Transition Block Shell -- Liquid crystal polymer (LCP) per ASTM D5138, or Polyphenylene sulfide GST-40F per ASTM D5927 or MIL-M-24519 Potting Material -- Epoxy, Black MCD-Plastic Shell -- Insulator/Body -- Polyester, glass filled per MIL-M-24519, Liquid crystal polymer (LCP) per ASTM D5138, or Polyphenylene sulfide GST-40F per ASTM D5927 or MIL-M-24519 Wire Terminations -- Solid copper per QQ-W-343 gold plated per MIL-G-45204 Stranded TEFLON insulated per MIL-W16878 Stranded TEFLON insulated per MIL-W22759/11, /33 Solid copper per QQ-W-343, solder dipped (Transition block) MCDM-Metal Shell -- Insulator -- Diallyl Phthalate per MILM-14, Type SDG-F Body Shell -- Aluminum alloy--high grade, nickel plated
Materials and Finishes
Contacts -- Copper alloy plated with .000050 [.00127] gold over copper flash per MIL-G-45204 Type II. Hardware -- see pages 14 and 15. MCK-Metal Shell -- Insulator -- Liquid crystal polymer (LCP) per ASTM D5138, or Polyphenylene sulfide GST-40F per ASTM D5927 or MIL-M-24519 Interfacial Seal -- Fluorosilicone Rubber per MIL-R-25988 (socket side only) Body Shell -- Aluminum alloy-high grade plated Cadmium per QQ-P-416 Nickel, electroless per AMS 2404
Mechanical
Contact Spacing -- .050 [1.27mm] centers. Contact Engagement & Separation -- Standard contact engaging force is 6.0 oz. [1.67N] (8.0 oz. [2.22N] max.). Separation force is 0.5 [.14N] oz. min. Mating Force Maximum -- Calculated as 10 oz. times the number of contacts.
Twist Pin, Pin and Socket Contacts
The contact spring member normally found in socket contacts has been eliminated by creating a breathing helical spring principle on the pin contact -- smaller, more durable contacts can be manufactured economically.
Wire range 24-36 AWG solid & stranded. MIL-DTL-83513 -- Only the descriptive legend in bold italic is applicable to current MIL-DTL-83513 configurations; MIL-DTL-83513/1 through /4 -- MCK metal shell; MIL-DTL-83513/6 through /9 -- MCD plastic shell. In addition, MIL-DTL-83513 solid copper wire termination is specified 25 AWG, 0.5; and 1.0 [25.4] lengths only and stranded insulated wire termination is specified 26 AWG, 18.0 [457.2] and 36.0 [914.4] lead lengths only. Hardware for MIL-DTL-83513 configurations is specified separately by the M83513/5-XX designation. M83513/1 through /4 and /6 through /9 specify no hardware (B). Mounting/mating hardware is shown on page 14 with the applicable military nomenclature. The MICRODOT catalog part number for a MIL-DTL-83513 configuration may be constructed to include the desired hardware. See pages 31-35 for M83513/ cross reference.
6
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors How To Specify MCK and MCD Connectors
Microminiature D Connectors
Metal Shell
S -- Solder pots 26 AWG max. X -- Special, not described by legend. MCKConnector Series Shell Finish
C1 -- Cadmium, Clear C2 -- Cadmium, Yellow Chromate N1 -- Nickel, Electroless
C2
B
37
P
6
A
1
18.0 Lead Length in Inches (Min.) Insulation Color or Finish
1 -- All white wire 6 -- Bare (unfinished) 2 -- All yellow wire 7 -- Color coded per MIL-STD-681, System 1 3 -- All gray wire 8 -- Special color code 4 -- Gold plated 9 -- 10 Solid color repeating per M-83513 5 -- Tin dipped gold plated
Hardware (See Pages 14 and 15)
B -- No Hardware F -- Float Bushing K, KM -- Jackscrew, Slotted Head, High Profile (9-51) H, HM -- Jackscrew, Slotted Head, High Profile (100) L, LM -- Jackscrew, Slotted Head, Low Profile (9-51) J, JM -- Jackscrew, Slotted Head, Low Profile (100) Q, QM -- Jackscrew, Allen Head, High Profile (9-51) T, TM -- Jackscrew, Allen Head, High Profile (100) R, RM -- Jackscrew, Allen Head, Low Profile (9-51) N, NM -- Jackscrew, Allen Head, Low Profile (100) P -- Jackpost Assembly (9-51) S -- Jackpost Assembly (100) X -- Lockscrew, Slotted Head Y -- Lockscrew, Allen Head Z -- Clip and Key (Clip Mount Only)
Wire Type
Per MIL-W-16878
1
{
A -- Type E, 7 strand B -- Type ET, 7 strand C -- Type E, 19 strand D -- Type ET, 19 strand F -- 7 strand per MIL-W-22759/11 (28 AWG only) G -- 19 strand per MIL-C-22759/11 (26 AWG only), 24 AWG L -- Copper, Solid (25 AWG only) Q -- Stranded per MIL-W-22759/33 (26 AWG only)
Wire Size
4 -- 24 AWG 5 -- 25 AWG 6 -- 26 AWG 8 -- 28 AWG 0 -- 30 AWG
Layout
9, 15, 21, 25, 31, 37, 51, 100 See contact arrangement
Contact Type
P -- Pin (Plug) S -- Socket (Receptacle)
Plastic Shell
S -- Solder pots 26 AWG max. X -- Special -- Does not fit description below. MCD R3 B 37 P 6 A 1
Connector Series Insulator Type/Material
G2 -- Clip Mount, polyester, natural G3 -- Screw Mount, polyester, natural, .093 Flg. R2 -- Clip Mount, Ryton R3 -- Screw Mount Liquid Crystal Polymer or Polyphenylene Sulfide
18.0 Lead Length in Inches (Min.) Insulation Color or Finish
1 -- All white wire 6 -- Bare (unfinished) 2 -- All yellow wire 7 -- Color coded per MIL-STD-681, System 1 3 -- All gray wire 8 -- Special color code 4 -- Gold plated 9 -- 10 Solid color repeating per M-83513 5 -- Tin dipped gold plated
Hardware (See Pages 14 and 15)
B -- No Hardware F -- Float Bushing K, KM -- Jackscrew, Slotted Head, High Profile L, LM -- Jackscrew, Slotted Head, Low Profile Q, QM -- Jackscrew, Allen Head, High Profile R, RM -- Jackscrew, Allen Head, Low Profile P -- Jackpost Assembly X -- Lockscrew, Slotted Head Y -- Lockscrew, Allen Head Z -- Clip and Key (Clip Mount Only) Per MIL-W-16878
Wire Type
{
Layout
9, 15, 21, 25, 31, 37, 51 See contact arrangement
A -- Type E, 7 strand B -- Type ET, 7 strand C -- Type E, 19 strand D -- Type ET, 19 strand F -- 7 strand per MIL-W-22759/11 (28 AWG only) G -- 19 strand per MIL-C-22759/11 (26 AWG only), 24 AWG L -- Copper, Solid (25 AWG only) Q -- Stranded per MIL-W-22759/33 (26 AWG only)
Wire Size
4 -- 24 AWG 5 -- 25 AWG 6 -- 26 AWG 8 -- 28 AWG 0 -- 30 AWG
Contact Type
P -- Pin (Plug) S -- Socket (Receptacle)
Note: Items in bold italic are qualified to MIL-DTL-83513.
7
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors Contact Arrangements Face View of Pin Insert (Socket Side is Mirror Image)
1
5
1
8
1
11
6
9
9
9 Contacts
15 Contacts
15
12
21 Contacts
21
1 1 13 9 16 14 25 24
8 1 15 23 17 30 16
25 Contacts
31 Contacts
31
30 Contacts (MCDM Only)
1 1 19 19 20
18
35 51
37 Contacts
37
36
51 Contacts
1 27 52 76
26
51 75 100
100 Contacts (MCK Only)
Note: MCK metal shells are not designed to intermate or interchange with MCD plastic shells. If metal/plastic intermating is desired, use MCDM Series Metal Shell on pages 25 and 26 with MCD Series Plastic Shell on page 11.
8
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MCK Series Metal Shell Connectors
Microminiature D Connectors
Dimensions per MIL-DTL-83513
Two Mtg. Holes O.092.004 (9-51 ) [2.340.10] O.145 - .150 (100 ) [3.68 - 3.81 ]
F Contact #1 Pin E
A .183.003 [4.650.08]
B
Crimp or Solder
.406.010 [10.310.25]
Pin .093.005 [2.360.13] C
Pin
Plug (Pin side)
1
D
o Tw Mtg. Holes O.092.004 (9-51 ) [2.340.10] O.145 - .150(100 ) [3.68 - 3.81 ]
F Contact 1 # Socket
E
A B .195.003 [4.950.08]
Crimp or Solder
Receptacle (Socket side)
.419.010 [10.640.25]
Socket .093.005 [2.360.13]
Socket
D C
Part Number MCK**- 9P*** MCK**- 9S*** MCK**- 15P*** MCK**- 15S*** MCK**- 21P*** MCK**- 21S*** MCK**- 25P*** MCK**- 25S*** MCK**- 31P*** MCK**- 31S*** MCK**- 37P*** MCK**- 37S*** MCK**- 51P*** MCK**- 51S*** MCK**- 100P*** MCK**- 100S*** P = Pin, S = Socket
A .010 [.254] .775 19.68 .775 19.68 .925 23.50 .925 23.50 1.075 27.30 1.075 27.30 1.175 29.84 1.175 29.84 1.325 33.66 1.325 33.66 1.475 37.46 1.475 37.46 1.425 36.20 1.425 36.20 2.160 54.86 2.160 54.86
B Max. .3338 8.48 .4018 10.21 .4838 12.29 .5518 14.02 .6338 16.10 .7018 18.05 .7338 18.64 .8018 20.37 .8838 22.45 .9518 24.18 1.0338 26.26 1.1018 27.99 .9838 24.99 1.0518 26.72 1.3838 35.15 1.508 38.30
C +.010 [.254] -.018 [.457] .390 9.91 .390 9.91 .540 13.72 .540 13.72 .690 17.53 .690 17.53 .790 20.07 .790 20.07 .940 23.88 .940 23.88 1.090 27.69 1.090 27.69 1.040 26.42 1.040 26.42 1.432 36.37 1.432 36.37
D Max .270 6.86 .270 6.86 .270 6.86 .270 6.86 .270 6.86 .270 6.86 .270 6.86 .270 6.86 .270 6.86 .270 6.86 .270 6.86 .270 6.86 .310 7.87 .310 7.87 .360 9.15 .360 9.15
E .010 [.254] .298 7.57 .298 7.57 .298 7.57 .298 7.57 .298 7.57 .298 7.57 .298 7.57 .298 7.57 .298 7.57 .298 7.57 .298 7.57 .298 7.57 .341 8.66 .341 8.66 .384 9.75 .384 9.75
F 005 [.127] .565 14.35 .565 14.35 .715 18.16 .715 18.16 .865 21.97 .865 21.97 .965 24.51 .965 24.51 1.115 28.32 1.115 28.32 1.265 32.13 1.265 32.13 1.215 30.86 1.215 30.86 1.800 45.71 1.800 45.71
9
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MCK Series Metal Shell Connectors Panel Mounting -- Cutout Dimensions Panel Mounting Dimensions -- MCK
.395 [10.03] .300 [7.62]
.200 [5.08]
Plug and Receptacle Rear Mounted
Plug and Receptacle Front Mounted
Plug Front Mounted Receptacle Rear Mounted
Panel Cutout Dimensions -- MCK
.095 [2.41] C Full Radius (Typ.) B .015 Max. [.381] Typ.
9-51 A
R
Figure 1 Front Mounting
Number of Contacts 9
Fig. 1
C .095 [2.41] A 9-51 Full Radius (Typ.) B
2 1 15 2
R
.101 - .000 4 Plcs. + .127 [2.56 - .000 ]
+ .005
116 Typ.
1 21 2 1
Figure 2 Rear Mounting
.122 [3.10]
1.810/1.805 [45.98/45.85]
25 2 1
100 Full Radius (Typ.)
.369/.364 [9.37/9.24]
31 2 1 37 2 1 51 2
1.448 .002 [36.83/36.73]
R
.015 Max. [.381] Typ.
Front Mounting
.122 [3.10]
1.810/1.805 [45.98/45.85]
A + .004 [.102] - .000 [.000] .404 10.26 .406 10.31 .554 14.07 .556 14.12 .704 17.88 .706 17.93 .804 20.42 .806 20.47 .954 24.23 .956 24.28 1.104 28.04 1.106 28.09 1.054 26.77 1.056 26.82
B + .004 [.102] - .000 [.000] .274 6.96 .257 6.53 .274 6.96 .257 6.53 .274 6.96 .257 6.53 .274 6.96 .257 6.53 .274 6.96 .257 6.53 .274 6.96 .257 6.53 .314 7.98 .300 7.62
C + .005 [.127] - .000 [.000] .570 14.48 .570 14.48 .720 18.29 .720 18.29 .870 22.10 .870 22.10 .970 24.64 .970 24.64 1.120 28.45 1.120 28.45 1.270 32.26 1.270 32.26 1.220 30.99 1.220 30.99
100 Full Radius (Typ.)
.403/.398 [10.24/10.11]
1.514 .002 [38.51/38.40]
R .055 Max. [1.40] Typ.
Rear Mounting
10
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MCD Series Plastic Shell Connectors
Microminiature D Connectors
Screw Mount Dimensions Per MIL-DTL-83513
Two Mtg. Holes O.092.004 [2.34.10]
F Contact #1
Pin
E
A B .199.005 [5.05.13]
Crimp or Solder
.395 /.360 [10.0 39.14] /
Pin .094.006 [2.390.15]
Pin
1
Plug (Pin side)
C
D
o w T
Mtg. Holes O.092.004 [2.340.10]
F Contact 1 #
Socket
E
A B .180.005 [4.570.13]
Crimp or Solder
Receptacle (Socket side)
.375 /.340 [9.52 /8.64]
Socket .094.006 [2.390.15] C
Socket
Liquid Crystal Polymer or Polyphenylene Sulfide -- MCDR3* per MIL-DTL-83513
D
Note: MCD Plastic Screw Mount Series is intermateable with MCDM Metal Series Connectors (Pages 25 and 26). Part Number MCD**- 9P*** MCD**- 9S*** MCD**- 15P*** MCD**- 15S*** MCD**- 21P*** MCD**- 21S*** MCD**- 25P*** MCD**- 25S*** MCD**- 31P*** MCD**- 31S*** MCD**- 37P*** MCD**- 37S*** MCD**- 51P*** MCD**- 51S*** A .010 [.254] .778 19.76 .778 19.76 .928 23.57 .928 23.57 1.078 27.38 1.078 27.38 1.178 29.92 1.178 29.92 1.328 33.73 1.328 33.73 1.478 37.54 1.478 37.54 1.428 36.27 1.428 36.27 C +.010 [.254] -.018 [.457] .398 10.11 .398 10.11 .548 13.92 .548 13.92 .698 17.73 .698 17.73 .798 20.27 .798 20.27 .948 24.08 .948 24.08 1.098 27.89 1.098 27.89 1.048 26.62 1.048 26.62 E .010 [.254] .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .250 6.35 .250 6.35 F 005 [.127] .565 14.35 .565 14.35 .715 18.16 .715 18.16 .865 21.97 .865 21.97 .965 24.51 .965 24.51 1.115 28.32 1.115 28.32 1.265 32.13 1.265 32.13 1.215 30.86 1.215 30.86 Avg. Weight lbs. 5% [grams] .0017 0.77 .0016 0.72 .0024 1.08 .0023 1.04 .0035 1.59 .0034 1.54 .0042 1.90 .0037 1.67 .0053 2.40 .0048 2.17 .0057 2.58 .0051 2.31 .0072 3.26 .0063 2.85
B Max. .2918 7.412 .3798 9.647 .4418 11.222 .5298 13.457 .5918 15.032 .6798 17.267 .6918 17.572 .7798 19.807 .8418 21.382 .9298 23.617 .9918 25.192 1.0798 27.427 .9418 23.922 1.0298 26.157
D Max .173 4.39 .173 4.39 .173 4.39 .173 4.39 .173 4.39 .173 4.39 .173 4.39 .173 4.39 .173 4.39 .173 4.39 .173 4.39 .173 4.39 .220 5.59 .220 5.59
P = Pin, S = Socket Note: Weight given is with .500 [12.7] uninsulated, solid, 24 AWG gold plated copper pigtails. *See "How to Specify" for description, on page 7.
11
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MCD Series Plastic Shell Connectors (Continued) Clip Mount -- MCD
.093 .003 [2.44 /2.29] .019 [.483]
Contact #1 Pin E
A B .199 [5.05]
Crimp or Solder
.395 /.360 [10.03 /9.14]
Pin .060 [1.52] C
Pin
Plug (Pin side)
D
.093 .003 [2.44 /2.29]
.019 [.483]
Contact #1
Socket
E
A B .180 [4.57]
Crimp or Solder
Receptacle (Socket side) Note: Clip Mount not covered by current issue of MIL-DTL-83513.
.375 /.340 [9.52 /8.64]
Socket .060 [1.52] C
Socket
D
Part Number MCD**- 9P*** MCD**- 9S*** MCD**- 15P*** MCD**- 15S*** MCD**- 21P*** MCD**- 21S*** MCD**- 25P*** MCD**- 25S*** MCD**- 31P*** MCD**- 31S*** MCD**- 37P*** MCD**- 37S*** MCD**- 51P*** MCD**- 51S***
A .005 [.127] .506 12.85 .506 12.85 .656 16.66 .656 16.66 .806 20.47 .806 20.47 .906 23.01 .906 23.01 1.056 26.82 1.056 26.82 1.206 30.63 1.206 30.63 1.156 29.36 1.156 29.36
B Max. .2918 74.12 .3798 96.47 .4418 112.22 .5298 134.57 .5918 150.32 .6798 172.67 .6918 175.72 .7798 198.07 .8418 213.82 .9298 236.17 .9918 251.92 1.0798 274.27 .9418 239.22 1.0298 261.57
C .010 [.254] .398 10.11 .398 10.11 .548 13.92 .548 13.92 .698 17.73 .698 17.73 .798 20.27 .798 20.27 .948 24.08 .948 24.08 1.098 27.89 1.098 27.89 1.048 26.62 1.048 26.62
D .010 [.254] .165 4.19 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .208 5.28 .208 5.28
E .005 [.127] .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .250 6.35 .250 6.35
Avg. Weight lbs. 5% [grams] .0017 0.77 .0016 0.72 .0024 1.08 .0023 1.04 .0035 1.59 .0034 1.54 .0042 1.90 .0037 1.67 .0053 2.40 .0048 2.17 .0057 2.58 .0051 2.31 .0072 3.26 .0063 2.85
P = Pin, S = Socket Note: Weight given is with .500 [12.7] uninsulated, solid, 24 AWG gold plated copper pigtails. *See "How to Specify" for description, on page 7.
12
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MCD Series Plastic Shell Connectors Panel Mounting -- Cutout Dimensions
Microminiature D Connectors
Panel Mounting Dimensions -- MCD
Clip Mount
.200.005 [5.080.13]
Screw Mount
.200.005 [5.080.13]
Plug and Receptacle Rear Mounted
.330.005 [8.380.13]
Plug and Receptacle Rear Mounted
.395.005 [10.030.13]
1
Plug and Receptacle Front Mounted
.265.005 [6.730.13]
Plug and Receptacle Front Mounted
.300.005 [7.620.13]
Plug Front Mounted Receptacle Rear Mounted
Plug Front Mounted Receptacle Rear Mounted
Panel Cutout Dimensions -- MCD
Clip Mounting
A B
Number of Contacts
Fig. 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
Screw Mounting
9
.005 .089 + .000 - 0.13 [2.26 + 0.00 ] -
C
B R .015 Max. [.381] Typ. Front A Front R .015 [.381] Max. Typ.
15
Full Radius (Typ.)
21
Figure 1
Figure 2
C A B .089 [2.26] A B R .015 Max. [.381] Typ. .075 [1.90
+ .005 - .000 + 0.13 - 0.00 ]
25
31
Full Radius (Typ.)
R
116 Typ.
Rear
Rear
37
Figure 3
Figure 4
51 Notes: Front mounting preferred.
A + .004 [.102] - .000 [.000] .438 [11.13] .412 [10.46] .438 [11.13] .384 [9.75] .588 [14.93] .562 [14.27] .588 [14.93] .534 [13.56] .738 [18.75] .712 [18.08] .738 [18.75] .684 [17.37] .838 [21.29] .812 [20.62] .838 [21.29] .784 [19.91] .988 [25.10] .962 [24.43] .988 [25.10] .934 [23.72] 1.138 [28.91] 1.112 [28.24] 1.138 [28.91] 1.084 [27.53] 1.088 [27.64] 1.062 [26.97] 1.088 [27.64] 1.034 [26.26]
B + .004 [.102] - .000 [.000] .177 [4.50] .177 [4.50] .222 [5.64] .222 [5.64] .177 [4.50] .177 [4.50] .222 [5.64] .222 [5.64] .177 [4.50] .177 [4.50] .222 [5.64] .222 [5.64] .177 [4.50] .177 [4.50] .222 [5.64] .222 [5.64] .177 [4.50] .177 [4.50] .222 [5.64] .222 [5.64] .177 [4.50] .177 [4.50] .222 [5.64] .222 [5.64] .224 [5.69] .224 [5.69] .264 [6.71] .264 [6.71]
C + .005 [.127] - .000 [.000] -- .570 [14.48] -- .570 [14.48] -- .720 [18.29] -- .720 [18.29] -- .870 [22.10] -- .870 [22.10] -- .970 [24.64] -- .970 [24.64] -- 1.120 [28.45] -- 1.120 [28.45] -- 1.270 [32.26] -- 1.270 [32.26] -- 1.220 [30.99] -- 1.220 [30.99]
13
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors Mounting and Coupling Hardware For Screw Mount MCK, MCD and MCDM
9-51 Contacts Slot Head
(K) (KM)
O .156 Max. [3.96] Over Knurl Jackscrew Retaining Ring .086-56UNC-2A [2.18]
(L) (LM)
O .125 [3.18] Jackscrew .098 [2.29]
(P)
.125 Hex. [3.18] .086-56UNC-2B [2.18] Bushing Lockwasher Hex Nut .086-56UNC-2A [2.18] .187 [4.75]
.600 [15.24]
.853 .015 [21.67 0.38]
Retaining Ring .086-56UNC-2A [2.18]
.340-.360 [8.64-9.14]
.475 [12.07]
Part Number 5-1532137-8 Jackscrew Assembly High Profile (K) 096-0002-0010 M83513/5-06 (KM) S96-0002-0084
Part Number 5-1532137-7 Jackscrew Assembly Low Profile (L) 096-0002-0011 M83513/5-05 (LM) S96-0002-0085 (R) (RM)
Part Number 5-1532137-9 Jackpost Assembly (P) S96-0002-0009 M83513/5-07 P mates with K,KM, L,LM, Q,QM and R,RM Jackscrew Assemblies.
9-51 Contacts 1/16" Allen Head
(Q) (QM)
O .156 Max. [3.96] Over Knurl Jackscrew Retaining Ring .086-56UNC-2A [2.18]
O .125 [3.18] Jackscrew
.098 [2.29]
.600 [15.24]
.853 .015 [21.67 0.38]
Retaining Ring .086-56UNC-2A [2.18]
.340-.360 [8.64-9.14]
Part Number 5-1532137-6 Jackscrew Assembly High Profile (Q) 096-0002-0014 M83513/5-03 (QM) S96-0002-0086
Part Number 5-1532137-5 Jackscrew Assembly Low Profile (R) 096-0002-0015 M83513/5-02 (RM) S96-0002-0087 (J) (JM)
100 Contacts Slot Head
(H) (HM)
O .200 Max. [3.96] Over Knurl Jackscrew Retaining Ring .112-40UNC-2A [2.84]
O .187 [4.75] Jackscrew
.100 [2.54]
.585 [14.86]
.920 Max. [23.37]
Retaining Ring .112-40UNC-2A [2.84]
.415 Max. [10.54]
Part Number 6-1532137-3 Jackscrew Assembly High Profile (H) 096-0002-0061 M83513/5-16 (HM) S96-0002-0088
Part Number 6-1532137-2 Jackscrew Assembly Low Profile (J) 096-0002-0062 M83513/5-15 (JM) S96-0002-0089 (N) (NM)
Notes: 1. Jackpost Assemblies will accommodate .094 [2.39] max. thickness panel. 2. Letter(s) in parentheses is to assist in ordering hardware with the connector (See "How To Specify" page 7). 3. Single letters (e.g. K) designate hardware kits (2 pcs. per kit) that meets M83513/05 requirements except the material is 303 stainless steel, passivated. 4. Add M suffix (e.g. KM) to designate hardware that meets all M83513/05 requirements. Material is corrosion resistant steel, non-magnetic, 125,000 PSI tensile strength minimum (Applies to jackscrews only). 5. Non-MIL hardware ordered separately should be ordered in pairs; i.e. 2 pcs. P/N 096-0002-0009 per connector half. 6. Items in bold italic are qualified to MIL-DTL-83513.
100 Contacts 1/16" Allen Head
(T) (TM)
O .200 Max. [3.96] Over Knurl Jackscrew Retaining Ring .112-40UNC-2A [2.84]
(S)
.100 [2.54]
.187 Hex. [4.75] .112-40UNC-2B [2.84] Bushing Lockwasher Hex Nut .112-40UNC-2A [2.84] .185 Max. [4.70]
O .187 [4.75] Jackscrew
.585 [14.86]
.920 Max. [23.37]
Retaining Ring .112-40UNC-2A [2.84]
.415 Max. [10.54]
.475 [12.07]
Part Number 6-1532137-1 Jackscrew Assembly High Profile (T) 096-0002-0064 M83513/5-13 (TM) S96-0002-0090
Part Number 6-1532137-0 Jackscrew Assembly Low Profile (N) 096-0002-0065 M83513/5-12 (NM) S96-0002-0091
Part Number 6-1532137-4 Jackpost Assembly (S) S96-0002-0060 M83513/5-17 S mates with H,HM, J,JM, T,TM and N,NM Jackscrew Assemblies.
14
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors Mounting and Coupling Hardware (Continued)
Microminiature D Connectors
For Screw Mount MCK, MCD and MCDM (Continued)
Slot Head
(X)
O .125 [3.18] Lockscrew Retaining Clip .086 -56UNC-2A [2.18] .075 [1.91]
1/16" Allen Head
(Y)
O .125 [3.18] Lockscrew Retaining Clip .086 -56UNC-2A [2.18] .343 .010 [8.71 0.25] .075 [1.91]
Part Number 4-1532137-3 Lockscrew Assembly 096-0002-0008
Part Number 1495164-1 Lockscrew Assembly 096-0002-0013
1
For Clip Mount -- MCD
(Z)
.600 [15.24]
.356 [9.04]
Part Number 1466018-1 Mounting Key and Clip P/N 096-0001-0000 (2 Required)
For Float Mount -- MCK, MCD and MCDM
(F)
Washer
Bushing
Float Mount Bushing (Factory Installed)
Notes: 1. Jackpost Assemblies will accommodate .094 [2.39] max. thickness panel. 2. Letter(s) in parentheses is to assist in ordering hardware with the connector (See "How To Specify" page 7). 3. Hardware ordered separately should be ordered in pairs; i.e. 2 pcs. P/N 096-0002-0013 per connector half.
15
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MCK Transition Blocks RT1 -- Right-Angle Termination Configuration
A Optional Jackpost (2 Plcs.) For 9 Thru 51: .086-56 UNC-2B For 100: .112-40 UNC-2B B C
D
Mounting Surface Contact #1 (Pin Connectors) .109 .015 [2.77 0.39]
MIL-DTL-83513/10 through /21 configurations. 90 -- Lo Profile termination configurations. See pages 31-35 for M83513 cross references.
Contact #1 (Socket Connectors) .190 Max. .185 Max. [4.83] (Sizes 9-51) [4.70] (Size 100 only)
F E G E
F G
Mounting Surface
.096.003 Dia. [2.440.08] Typ.
Mounting Surface
.096.003 Dia. [2.440 .08] Typ. H .125.003 Dia. [3.180 .08] Typ. (Size 100 Only)
9, 15, 21 & 25 Contacts
31, 37, 51 & 100 Contacts
How To Specify
MCK
C2
P
37
P
RT1 Right Angle Termination (Solder Dipped)
RT1 -- w/ .109 Leads RT1A -- w/ .140 Leads RT1B -- w/ .172 Leads
Contact Type
S = STD Socket P = STD Pin
Layout
9, 15, 21, 25, 31, 37, 51 and 100
Hardware
P = Jackpost (9-51) B = No Hardware S = (100)
Shell Finish
C2 = Cadmium, Yellow Chromate N1 = Nickel, Electroless
Connector Series
(See page 9)
Notes: 1. For terminal identification see page 18. 2. Grid pattern for all configurations is .100 x .100 [2.54 x 2.54]. 3. Lead lengths shown are for RT1. 4. Items in bold italic are qualified to MIL-DTL-83513.
16
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MCK Transition Blocks (Continued)
Microminiature D Connectors
RT1 -- Right-Angle Termination Configuration
(Continued)
Part Number MCK-**- *MCK-**- *9PRT1 9SRT1
MCK-**- *- 15PRT1 MCK-**- *- 15SRT1 MCK-**- *- 21PRT1 MCK-**- *- 21SRT1 MCK-**- *- 25PRT1 MCK-**- *- 25SRT1 MCK-**- *- 31PRT1 MCK-**- *- 31SRT1 MCK-**- *- 37PRT1 MCK-**- *- 37SRT1 MCK-**- *- 51PRT1 MCK-**- *- 51SRT1 MCK-**- *- 100PRT1 MCK-**- *- 100SRT1 P = Pin, S = Socket
A Max. .787 19.99 .787 19.99 .937 23.80 .937 23.80 1.087 27.61 1.087 27.61 1.187 30.15 1.187 30.15 1.337 33.96 1.337 33.96 1.487 37.77 1.487 37.77 1.435 36.45 1.435 36.45 2.175 55.25 2.175 55.25
B 005 [.127] .565 14.35 .565 14.35 .715 18.16 .715 18.16 .865 21.97 .865 21.97 .965 24.51 .965 24.51 1.115 28.32 1.115 28.32 1.265 32.13 1.265 32.13 1.215 30.86 1.215 30.86 1.800 45.72 1.800 45.72
C Max. .3338 8.48 .4018 10.21 .4838 12.29 .5518 14.02 .6338 16.10 .7018 17.83 .7338 18.64 .8018 20.37 .8838 22.45 .9518 24.18 1.0338 26.26 1.1018 27.99 .9838 24.99 1.0518 26.72 1.3838 35.15 1.508 38.30
D Max. .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .351 8.92 .351 8.92 .394 10.01 .394 10.01
E Max. .425 10.80 .425 10.80 .425 10.80 .425 10.80 .425 10.80 .425 10.80 .425 10.80 .425 10.80 .525 13.34 .525 13.34 .525 13.34 .525 13.34 .660 16.76 .660 16.76 1.010 25.65 1.010 25.65
F +.010 [.254] .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .300 7.62 .300 7.62 .400 10.16 .400 10.16
G +.010 [.254] .230 5.84 .230 5.84 .130 3.30 .130 3.30 .130 3.30 .130 3.30 .130 3.30 .130 3.30 .130 3.30 .130 3.30 .130 3.30 .130 3.30 .150 3.81 .150 3.81 .200 5.08 .200 5.08
H Max. -- -- -- -- -- -- -- -- 1.090 27.69 1.090 27.69 1.190 30.23 1.190 30.23 1.230 31.24 1.230 31.24 1.825 46.36 1.825 46.36
1
Note: Items in bold italic are qualified to MIL-DTL-83513.
17
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MCK Transition Blocks (Continued) RT1 -- Right-Angle Termination Configuration
(Continued) View is from mounting surface of connector. Plug configuration shown. For receptacle, use mirror image. (Except 100 contacts)
.100 Typ. [2.54] C L
5 9 8 4 2 3 7 1 6
.050 Typ. [1.27]
.100 Typ. [2.54] C L
7 8 15 14 6 13 5 4 12 11 3 10 2 1 9
.050 Typ. [1.27] .108 [2.74]
10 11
.100 Typ. [2.54] C L
8 9 20 19 7 18 6 5 17 4 3 14 2 1
.050 Typ. [1.27] .020 [0.51]
.083 [2.11] .566 Ref. [14.38]
.020 [0.51]
.020 [0.51]
21
16 15 13
12
.716 Ref. [18.19]
.866 Ref. [22.00]
.083 [2.11]
9 Contacts
.100 Typ. [2.54] C L
12 13 25 11 10 24 23 22 9 8 6 7 19 5 4 3 17 18 2 15 16 1 14
15 Contacts
.050 Typ. [1.27] .083 [2.11] .100 Typ. [2.54] C L
15 13 16 14 12 11 10 25 26 9 8 24 7 23 22 21 20 6 5 9
21 Contacts
.050 Typ. [1.27]
.158 [4.01]
4 3 17 18 2 1
21 20
.020 [0.51]
30 29 27 3 28
.020 [0.51]
.966 Ref. [24.54]
1.116 Ref. [28.35]
25 Contacts
.100 Typ. [2.54] .050 Typ. [1.27]
19 17 15 13 18 16 37 35 33 36 34 11 14 12 31 29 32 30
31 Contacts
.100 Typ. [2.54] C L
17 18 16 20 35 33 34 32 15 14 31 30 49 13 12 29 28 48 11 10 46 27 8 9 7 6 5 4 3 2 1 21 19 22 20 37 36
C L
9 10 8 28 26 27 25 7 6 24 2 5 4 22 21 3 2
.020 [0.51]
1
.050 Typ. [1.27]
.050 [1.27]
43 41 25 23 26 24
45 42 47
1.266 Ref. [32.16]
.183 [4.65]
51 50
44 40 39 38
1.216 Ref. [30.89]
.108 [2.74]
37 Contacts
1.800 Ref. [45.72] .100 Typ. [2.54] Ref. C L .050 Typ. [1.27] Ref.
18 17 20 22 19 45 44 68 67 21 47 46 48 70 69 92 72 71 73 94 95 96 97 24 23 49 50 74 75 98 100 99 26 25 51
51 Contacts
1.800 Ref. [45.72] .100 Typ. [2.54] Ref. C L .100 Typ. [2.54] .050 Typ. [1.27] Ref.
9 10 37 35 36 34 59 57 60 58 82 83 8 7 6 33 31 32 55 5 4 29 30 28 53 52 76 77 3 2 27 1
.275 Ref. [6.99]
.275 Ref. [6.99]
2 1 3
4 5
6 7 31
8 9 33 32 58
10
12 11 13
14 16 15
25 26 51
23 24 49
21 19 22
17
15 16 14 41
13 11 12 39 38
.100 Ref. [2.54]
20 18 43
27 29
35 37 34 60 36 38 62 61 84 63 86
39 41 43 40 42
47 45 46 44 71 69 72 70 96
28 30 52 54 56 53 76 78 77
50 75
48 73
42 40 67 65 66 64 92 90
64 66 65
63 61 62
55 57 80 79
59 82
74 100 98 99
68 94
56 54 80 78 81 79
88 90
88 86 84 85
81
83 85 87
89 91 93
97
95
93
91 89 87
.025 Ref. [0.64]
.100 Ref. [2.54] Socket #1 Ref.
.025 Ref. [0.64]
.100 Ref. [2.54] Pin #1 Ref.
100 Contacts (Socket Connector)
(Receptacle Connector)
100 Contacts (Pin Connector)
(Plug Connector)
18
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MCK Transition Blocks (Continued)
Microminiature D Connectors
ST1 -- Straight Termination Configuration
Contact #1 (Pin Connector) A B Contact #1 (Socket Connector) .096.003 Dia. Typ. [2.44.076] (For Size 9 Thru 51) .125.003 Dia. Typ. [3.18.076] (For Size 100 Only)
F Optional Jackpost (2 Plcs.) For 9 Thru 51: .086-56 UNC-2B For 100: .112-40 UNC-2B
C
MIL-DTL-83513/22 through /27 configurations. 180 -- Lo Profile termination configurations. See page 35 for M83513 cross references.
1
.190 Max. (Sizes 9-51) [4.83] .185 Max. (Size100 only) [4.70] D E
.355 Max. [9.02] (Sizes 9-51)
.550 Max. [13.97] (Size100 only) .165 Max. (Sizes 9-51) .303 Max. (Size 100 only) [4.20] [7.70] .100 Typ. [2.54] .050 Typ. [1.27] .109 .015 [2.77 0.39] (Lead Length For ST1 Shown)
Lead #1 (Pin Connector)
Lead #1 (Socket Connector)
How To Specify
MCK
C2
P
37
P
ST1 Straight Termination (Solder Dipped)
ST1 -- w/ .109 Leads ST1A -- w/ .140 Leads ST1B -- w/ .172 Leads
Contact Type
S = STD Socket P = STD Pin
Layout
9, 15, 21, 25, 31, 37, 51 and 100
Hardware
P = Jackpost (9-51) B = No Hardware S = (100)
Shell Finish
C2 = Cadmium, Yellow Chromate N1 = Nickel, Electroless
Connector Series
(See page 9)
Notes: 1. For terminal identification see page 5048. 2. Grid pattern for all configurations is .100 x .100 [2.54 x 2.54]. 3. Lead lengths shown are for ST1. 4. Items in bold italic are qualified to MIL-DTL-83513.
19
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MCK Transition Blocks (Continued) ST1 -- Straight Termination Configuration (Continued)
Part Number MCK-**- *MCK-**- *9PST1 9SST1
MCK-**- *- 15PST1 MCK-**- *- 15SST1 MCK-**- *- 21PST1 MCK-**- *- 21SST1 MCK-**- *- 25PST1 MCK-**- *- 25SST1 MCK-**- *- 31PST1 MCK-**- *- 31SST1 MCK-**- *- 37PST1 MCK-**- *- 37SST1 MCK-**- *- 51PST1 MCK-**- *- 51SST1 MCK-**- *- 100PST1 MCK-**- *- 100SST1 P = Pin, S = Socket
A Max. 1.390 35.31 1.390 35.31 1.390 35.31 1.390 35.31 1.690 42.93 1.690 42.93 1.740 44.20 1.740 44.20 2.040 51.82 2.040 51.82 2.340 59.44 2.340 59.44 2.270 57.66 2.280 57.91 3.250 82.55 3.250 82.55
B .007 [.178] 1.150 29.21 1.150 29.21 1.150 29.21 1.150 29.21 1.450 36.83 1.450 36.83 1.500 38.10 1.500 38.10 1.800 45.72 1.800 45.72 2.100 53.34 2.100 53.34 2.000 50.80 2.000 50.80 2.800 71.12 2.800 71.12
C .005 [.127] .565 14.35 .565 14.35 .715 18.16 .715 18.16 .865 21.97 .865 21.97 .965 24.51 .965 24.51 1.115 28.32 1.115 28.32 1.265 32.13 1.265 32.13 1.215 30.86 1.215 30.86 1.800 45.72 1.800 45.72
D Max. .885 22.48 .885 22.48 .945 24.00 .945 24.00 1.185 30.10 1.185 30.10 1.275 32.39 1.275 32.39 1.575 40.01 1.575 40.01 1.875 47.63 1.875 47.63 1.775 45.09 1.775 45.09 2.585 65.66 2.585 65.66
E Max. .3338 8.48 .4018 10.21 .4838 12.29 .5518 14.02 .6338 16.10 .7018 17.83 .7338 18.64 .8018 20.37 .8838 22.45 .9518 24.18 1.0338 26.26 1.1018 27.99 .9838 24.99 1.0518 26.72 1.3838 35.15 1.508 38.30
F Max. .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .351 8.92 .351 8.92 .460 11.68 .460 11.68
Note: Items in bold italic are qualified to MIL-DTL-83513.
20
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MCK Transition Blocks (Continued)
Microminiature D Connectors
ST1 -- Straight Termination Configuration (Continued)
View is from mounting surface of connector. Plug configuration shown. For receptacle, use mirror image.
.050 [1.27]
6 1
.100 Typ. [2.54] C L
9 5 1
.050 Typ. [1.27]
.050 [1.27]
17
C L
31
.100 Typ. [2.54] .050 Typ. [1.27]
16
1
.375 [9.53]
9 Contacts
.150 [3.81]
31 Contacts
.100 Typ. [2.54] .050 Typ. [1.27]
19
.050 [1.27]
9 1
C L
15
.100 Typ. [2.54] .050 Typ. [1.27]
8
.050 [1.27]
20 1
C L
37
.225 [5.72]
.150 [3.81]
15 Contacts
37 Contacts
.100 Typ. [2.54] .050 Typ. [1.27]
35 18
.050 [1.27]
12 1
C L
21
.100 Typ. [2.54] .050 Typ. [1.27]
11
.100 [2.54]
36 19 1
C L
51
.225 [5.72]
.150 [3.81]
21 Contacts
51 Contacts
.100 Typ. [2.54] .050 Typ. [1.27] 100
75 51 26
.100 Typ. [2.54] .050 [1.27]
14 1
C L
25 13
.050 [1.27] Typ.
.050 [1.27]
C L
76 52 27 1
.150 [3.81]
.150 [3.81]
25 Contacts
100 Contacts
Socket #1 Ref.
Pin #1 Ref.
(Receptacle Connector)
(Plug Connector)
21
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MCK ST2 Series Straight Mount PCB Connectors MCK with Cactus Bend Termination
.308 Max. [7.83]
A
Pin Contact #1 C B .190 Max. [4.83] .182 .004 [4.62 0.10] 2-56 UNC-2B Thd. Opt. Jackpost 2 Plcs.
I I I I I
Meets MIL-DTL-83513 Performance requirements Single metal shell with no Transition Block Low profile and light weight .100 [2.54] x .075 [1.91] grid pattern Design allows lower cost construction
.400 Max. [10.16]
Pin 2-56 Thd. Studs. Opt.
.109 Min. [2.76]
.160 Min. [4.06]
.210 .02 [5.33 0.5] .225 Ref. [5.72]
#25 AWG, Copper, Hard, Gold Plated, Solder Dipped .075 Typ. [1.91]
.100 Typ. [2.54] Metal Mounting Surface .050 Typ. [1.27]
.075 Typ. [1.91] .025 Typ. [0.64]
.038 Typ. [0.97]
.308 Max. [7.83]
A
Socket 2-56 UNC-2B Thd. Opt. Jackpost 2 Plcs.
Contact #1 C B .190 Max. [4.83]
.195 .003 [4.95 0.08]
.400 Max. [10.16]
Socket 2-56 Thd. Studs. Opt.
.109 Min. [2.76]
.160 Min. [4.06]
.210 .02 [5.33 0.5] .225 Ref. [5.72]
#25 AWG, Copper, Hard, Gold Plated, Solder Dipped .075 Typ. [1.91]
.100 Typ. [2.54] Metal Mounting Surface .050 Typ. [1.27]
.075 Typ. [1.91] .025 Typ. [0.64]
.038 Typ. [0.97]
22
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MCK ST2 Series Straight Mount PCB Connectors (Continued)
Microminiature D Connectors
Part Number MCK-**-*- 9 PST2 MCK-**-*- 9 SST2 MCK-**-*- 15 PST2 MCK-**-*- 15 SST2 MCK-**-*- 21 PST2 MCK-**-*- 21 SST2 MCK-**-*- 25 PST2 MCK-**-*- 25 SST2 MCK-**-*- 31 PST2 MCK-**-*- 31 SST2 MCK-**-*- 37 PST2 MCK-**-*- 37 SST2
A Max. .785 19.94 .785 19.94 .935 23.75 .935 23.75 1.085 27.56 1.085 27.56 1.185 30.10 1.185 30.10 1.335 33.91 1.335 33.91 1.485 37.72 1.485 37.72
B .005 .565 14.35 .565 14.35 .715 18.16 .715 18.16 .865 21.97 .865 21.97 .965 24.51 .965 24.51 1.115 28.32 1.115 28.32 1.265 32.13 1.265 32.13
C Max. .333 8.46 .402 10.21 .483 12.27 .552 14.02 .633 16.08 .702 17.83 .733 18.62 .802 20.37 .883 22.43 .952 24.18 1.033 26.24 1.102 27.99
1
How To Specify
MCK
C2
P
37
P
ST2 Straight Termination Contact Type
S = Standard Socket P = Standard Pin
Layout
9, 15, 21, 25, 31, 37
Hardware
P = Jackpost (2-56 THD) B = No Hardware
Shell Finish
C2 = Cadmium, Yellow Chromate N1 = Nickel, Electroless
Connector Series
(See Page 9)
23
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MCK ST2 Series Straight Mount PCB Connectors (Continued)
View is of mounting surface of pin connector
View is of mounting surface of socket connector
C L
6 8 7 1 3 2 4 9 5 9
C L
7 8 5 3 4 2 6 1
Size 9
.183 [4.65]
10
Size 9
.183 [4.65]
C L
12 13 6 5 7 14 15 8 14
C L
12 11 3 4 2 10 9 1
Size 15
.183 [4.65]
12 1
9 2
11 4 3
Size 15
.183 [4.65]
15 7 8
13 5 6
C L
14 13 1 3 2 4 15 5 6 16 17 7 8 18 19 9 10 20 21 11 21 19 20 11 9 8 10 18 7
C L
17 16 5 6 4 15 14 3 2 13 12 1
Size 21
.183 [4.65]
14
Size 21
.183 [4.65]
25 25 13
C L
16 15 1 3 2 4 17 5 6 18 19 7 8 20 21 9 22 23 11 10 24 23 24 13 11 12 10 22 9 8 21
C L
19 20 7 6 18 5 4 17 16 3 2 15 14 1
Size 25
.183 [4.65]
Size 25
.183 [4.65]
12
C L
18 20 21 6 5 7 4 3 22 23 8 9 24 25 10 26 27 12 11 28 29 14 13 30 31 16 15 30 28 27 11 12 10 13 14 26 25
C L
24 23 7 8 6 9 22 21 5 4 20 19 3 2 18 17 1
Size 31
.183 [4.65]
17 2 1
19
Size 31
.183 [4.65]
31 15 16
29
C L
20 22 21 1 2 3 4 23 5 6 24 25 7 8 26 27 9 28 30 29 11 10 32 31 13 12 14 34 33 15 16 35 17 36 37 19 18 37 35 36 19 17 18 16 34 15 14 33 32 13 12 31 30 11
C L
29 27 28 9 10 8 25 26 7 6 23 24 5 4 22 3 2 21 20 1
Size 37
.183 [4.65]
Size 37
.183 [4.65]
Pin #1 Ref.
Socket #1 Ref.
(Plug Connector)
(Receptacle Connector)
24
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MCDM Series Metal Shell Connectors
Microminiature D Connectors
Technical & Performance Data
Performance
Contact Resistance -- The average mated contact resistance is 4 milliohms, with a maximum value of 8 milliohms, using standard #24 solid copper leads when measured directly behind the crimp joints of the mated pin and socket contacts. The average resistance value at 100 microvolts is 4.8 milliohms. Dielectric Withstanding Voltage (60 Hz rms room temperature) -- Solder Pots: 600 VAC at sea level; 150 VAC at 70,000 feet [21,336 m]. Wire Terminations: 750 VAC at sea level; 200 VAC at 70,000 feet [21,336m] Vibration (Per MIL-STD-202C, Method 204-A, Condition D) -- No discontinuity in excess of 1 microsecond during twelve 20 minute sweeps from 10 to 2,000 CPS at .06 double amplitude or 20 G forces, whichever is less. Corrosion Resistance (Per MIL-STD-202C, Method 101B, Condition B) -- Both mated and unmated samples do not exceed the maximum allowable contact resistance
(8 milliohms) when subjected to the 48 hour salt spray test. Durability -- The contact resistance after 500 mating cycles is less than the maximum allowable, 8 milliohms. Insulation Resistance -- Greater than 5,000 megohms at room temperature for the materials listed under "Materials". Maximum Current Carrying Capacity -- No. 24 contact, 3 amperes. It must be recognized, however, that all the wires to a connector will not carry their maximum current under all environmental conditions due to wire temperature. Contact Engaging and Separation Forces -- 6 oz. [1.67N] maximum (eng.); 0.5 oz. [.14N] minimum (sep.). Temperature Range (Operating) -- Diallyl phthalate -67F to 257F [-55C to +125C].
Materials
Insulator -- Diallyl phthalate per MIL-M-14, Type SDG-F or Liquid Crystal Polymer (LCP) per ASTM D5138. Contacts -- Pin Contact: Copper alloy and beryllium copper alloy make up the complete construction. Socket Contact: Copper alloy. Body Shell -- High grade aluminum alloy.
Finishes
Contacts -- Standard finish is 0.000050 [0.00127] gold over copper flash per MIL-G-45204, Type II. Body Shell -- Electroless nickel per AMS 2404.
Note: Insulators are molded into their metal shells -- No bonded joint is used.
1
Screw Mount
A F Contact #1 E Pin .089-.094 Dia. [2.26-2.39] 2 Plcs.
.193 [4.90]
B .093 [2.36]
The only metal shell connector that mates with all existing plastic types. This line is ideal for external use and other applications requiring frequent disconnect and remating. When durability and reliability are paramount the metal shell connector is unsurpassed -- it eliminates the need for retrofitting where new metal shell varieties must mate with older plastic types. Originally designed for military applications, they are currently used for commercial requirements, including computers.
.379 [9.63]
Pin
Pin
C
D
A F Contact #1 E
Socket
.089-.094 Dia. [2.26-2.39]
.180 [4.57]
B .093 [2.36]
.365 [9.27]
Socket
Socket
.798 [20.27]
D
25
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MCDM Series Metal Shell Connectors (Continued) Screw Mount (Continued) How To Specify
S -- Solder pot for #26 max. stranded wire X -- Special, does not fit description below. MCD- M1 Connector Series Shell Type and Material
M1 -- Metal Shell Screw Mount Diallyl Phthalate or LCP Insulator
B
37
P
6
A
1
18.0 Lead Length in Inches (min.) Insulation Color or Finish
1 -- All white wire 2 -- All yellow wire 3 -- All gray wire 4 -- Gold plated 5 -- Tin dipped gold plated 6 -- Bare (unfinished) 7 -- Color coded per MIL-STD-681, System 1 8 -- Special color code 9 -- 10 color repeating (solid) per M83513
Hardware (See Pages 14 and 15)
B -- No Hardware F -- Float Bushing K -- Jackscrew, Slotted Head, High Profile L -- Jackscrew, Slotted Head, Low Profile Q -- Jackscrew, Allen Head, High Profile R -- Jackscrew, Allen Head, Low Profile X -- Lockscrew, Slotted Head Y -- Lockscrew, Allen Head P -- Jackpost
Wire Type
*A -- Type E, 7 strand *B -- Type ET, 7 strand *C -- Type E, 19 strand *Per MIL-W-16878 *D -- Type ET, 19 strand F -- 7 strand per MIL 22759/11 (#28 AWG only) G -- 19 strand per MIL-22759/11 #26 AWG, #24 AWG L -- Copper, solid Q -- Stranded per MIL-W-22759/33
Wire Size
4 -- #24 5 -- #25 6 -- #26 8 -- #28 0 -- #30
Contact Type
P -- Pin S -- Socket
Layout
9, 15, 21, 25, 30, 31, 37, 51
Part Number MCDM1-9P*** MCDM1-9S*** MCDM1-15P*** MCDM1-15S*** MCDM1-21P*** MCDM1-21S*** MCDM1-25P*** MCDM1-25S*** MCDM1-30P*** MCDM1-30S*** MCDM1-31P*** MCDM1-31S*** MCDM1-37P*** MCDM1-37S*** MCDM1-51P*** MCDM1-51S***
A .005 [.127] .780 19.81 .780 19.81 .930 23.62 .930 23.62 1.080 27.43 1.080 27.43 1.180 29.97 1.180 29.97 .930 23.62 .930 23.62 1.330 33.78 1.330 33.78 1.480 37.59 1.480 37.59 1.430 36.32 1.430 36.32
B .005 [.127] .290 7.36 .365 9.27 .440 11.18 .515 13.08 .590 14.99 .665 16.89 .690 17.53 .765 19.43 .435 11.05 .515 13.08 .840 21.34 .915 23.24 .990 25.15 1.065 27.05 .940 23.88 1.015 25.78
C .010 [.254] .398 10.11 .398 10.11 .548 13.92 .548 13.92 .698 17.73 .698 17.73 .798 20.27 .798 20.27 .548 13.92 .548 13.92 .948 16.46 .948 16.46 1.098 27.89 1.098 27.89 1.048 26.62 1.048 26.62
D .010 [.254] .165 4.19 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .252 6.40 .252 6.40 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .208 5.28 .208 5.28
E .005 [.127] .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .295 7.49 .295 7.49 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .250 6.35 .250 6.35
F .005 [.127] .565 14.35 .565 14.35 .715 18.16 .715 18.16 .865 21.97 .865 21.97 .965 24.51 .965 24.51 .715 18.16 .715 18.16 1.115 28.32 1.115 28.32 1.270 32.26 1.270 32.26 1.215 30.86 1.215 30.86
Avg. Weight lbs. 5% [grams] .003 1.36 .003 1.36 .004 1.81 .004 1.81 .005 2.26 .005 2.26 .006 2.72 .005 2.26 .007 3.17 .007 3.17 .007 3.17 .006 2.72 .007 3.17 .007 3.17 .009 4.08 .008 3.62
Note: Weight given is with .500 [12.7] uninsulated, solid, 24 AWG gold plated copper pigtails.
26
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MCDM Series Metal Shell RF COMBOMATE Connectors
Microminiature D Connectors
Screw Mount Coaxial Terminations
Available now -- RF Performance in standard subminiature rectangular connectors, with VSWR values of 1.01 to 1.10 in frequencies ranging in DC to 2.3 GHz. This is the COMBOMATE Connector. This series of connectors incorporates the same metal shells and twist pin contacts used in the widely accepted, high reliability, MCDM Series. The RF COMBOMATE Connector Series will accommodate RG 196 A/U or RG 178 B/U coaxial cable terminated in a unique manner in standard, already tooled insert layouts. This feature results in savings in cost, time and space. The RF COMBOMATE Connector Series will accommodate a maximum of 17 RG 196 A/U or RG 178 B/U cables in an area of less than .225 sq. inches [14.51 mm2]. Mixed layouts with coaxial terminations and standard AWG 24, 26 and 28 are also immediately available in 7 different shell sizes. The overall envelope and mounting dimensions of equivalent size of COMBOMATE Connectors are exactly the same as the standard MCDM Series.
Contact #1 E
A F .089-.094 Dia. [2.26-2.39] 2 Plcs.
Pin
.193 [4.90]
B .093 [2.36]
.379 [9.63]
Pin
Pin
1
.250 Max. [6.35]
Epoxy C D
A F Contact #1 E Socket .089-.094 Dia. [2.26-2.39]
.180 [4.57]
B .093 [2.36]
.365 [9.27] Socket
Socket
.250 Max. [6.35]
Epoxy D
Performance Data -- Coaxial Terminations
Impedance -- 49.0 to 51.0 Ohms. Voltage Standing Wave Ratio (VSWR) -- 1.01:1 to 1.10:1 at frequency ranging in DC to 2.3 GHz. Dielectric Withstanding Voltage (60 Hz rms room temperature) -- 750 VAC at sea level; 200 VAC at 70,000 feet [21,336 m].
(Actual Test Data) 1 to 2 30 MHz 60.0 db 100 MHz 49.1 db 175 MHz 42.6 db 38.0 db 500 MHz 31.6 db 1000 MHz 2000 MHz 22.4 db 3000 MHz 21.5 db
Crosstalk (Between Adjacent Lines) 2 to 3 3 to 4 59.8 db 60.7 db 48.3 db 51.7 db 41.4 db 47.2 db 38.8 db 39.5 db 32.0 db 30.0 db 22.5 db 22.3 db 23.9 db 21.4 db
4 to 5 60.0 db 50.6 db 47.0 db 40.0 db 32.5 db 20.8 db 24.2 db
Sample 30 MHz 100 MHz 175 MHz 500 MHz 1000 MHz 2000 MHz 3000 MHz
#1 .08 db .24 db .35 db .58 db 1.25 db 1.48 db 2.66 db
Insertion Loss #2 #3 .08 db .08 db .24 db .25 db .36 db .36 db .60 db .50 db 1.33 db 1.36 db 1.71 db 1.42 db 2.45 db 2.74 db
#4 .08 db .25 db .34 db .58 db 1.35 db 1.40 db 2.86 db
#5 .08 db .25 db .32 db .48 db 1.24 db 1.45 db 2.84 db
Note: Verification of all test data is on file at Tyco Electronics and is available upon request. All test runs using RG 196 A/U.
27
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MCDM Series Metal Shell RF COMBOMATE Connectors (Continued) Screw Mount Coaxial Terminations (Continued) How To Specify
MCD M3 7 P 3 18.0 Lead Length in Inches (min.) Wire Size
3 -- RG 196 A/U (White insulation) 2 -- RG 178 B/U (Brown insulation) X -- Special, does not fit description*
Contact Type
P -- Pin S -- Socket
Layout
3, 5, 7, 8, 10, 12, 17 Maximum RF combinations using RG 196 A/U and RG 178 B/U cable
Shell Type and Material
M3 -- Metal Shell Screw Mount Diallyl Phthalate or LCP Insulator
Connector Series
*Ordering Criteria: A wide variety of contact combinations, coaxial and power mixed, are available. Contact Tyco Electronics for additional arrangement numbers.
Part Number MCDM3-3P** MCDM3-3S** MCDM3-5P** MCDM3-5S** MCDM3-7P** MCDM3-7S** MCDM3-8P** MCDM3-8S** MCDM3-10P** MCDM3-10S** MCDM3-12P** MCDM3-12S** MCDM3-17P** MCDM3-17S**
A .005 [ .127] .780 19.81 .780 19.81 .930 23.62 .930 23.62 1.080 27.43 1.080 27.43 1.180 29.97 1.180 29.97 1.330 33.78 1.330 33.78 1.480 37.59 1.480 37.59 1.430 36.32 1.430 36.32
B .005 [ .127] .290 7.36 .365 9.27 .440 11.18 .515 13.08 .590 14.99 .665 16.89 .690 17.53 .765 19.43 .840 21.34 .915 23.24 .990 25.15 1.065 27.05 .940 23.88 1.015 25.78
C Max. .408 10.36 .408 10.36 .558 14.17 .558 14.17 .708 17.98 .708 17.98 .808 20.52 .808 20.52 .958 24.33 .958 24.33 1.108 27.89 1.108 27.89 1.058 26.87 1.058 26.87
D Max. .200 5.08 .200 5.08 .200 5.08 .200 5.08 .200 5.08 .200 5.08 .200 5.08 .200 5.08 .200 5.08 .200 5.08 .200 5.08 .200 5.08 .245 6.22 .245 6.22
E .005 [ .127] .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .250 6.35 .250 6.35
F .005 [ .127] .565 14.35 .565 14.35 .715 18.16 .715 18.16 .865 21.97 .865 21.97 .965 24.51 .965 24.51 1.115 28.32 1.115 28.32 1.270 32.26 1.270 32.26 1.215 30.86 1.215 30.86
28
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MCDM Series Metal Shell RF COMBOMATE Connectors (Continued)
Microminiature D Connectors
Contact Arrangement as Viewed from the Engaging Face of the Pin Side
1
5
1
8
1
11
6
9
9
15
12
21
3 RG196 A/U or RG 178 B/U
1
5 RG196 A/U or RG 178 B/U
13 1
7 RG196 A/U or RG 178 B/U
16
14
25
17
31
1
8 RG196 A/U or RG 178 B/U
1 19
10 RG196 A/U or RG 178 B/U
Center Conductor
20
37
12 RG196 A/U or RG 178 B/U
1 18
Shield
Termination Pattern
19 35
36
51
17 RG196 A/U or RG 178 B/U
Note: The above contact arrangements are the maximum densities that can be obtained in each shell size when using RG 196 A/U or RG 178 B/U cable.
29
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MCDM Series Metal Shell Connectors Panel Mounting -- Cutout Dimensions Panel Mounting Dimensions -- MCDM
.200 .005 [5.08 0.13] .395 .005 [10.03 0.13]
Plug and Receptacle Plug and Receptacle Rear Mounted Rear Mounted
Plug and Receptacle Plug and Receptacle Front Mounted Front Mounted
.300 .005 [7.62 0.13]
Plug Front Mounted Plug Front Mounted Receptacle Rear Mounted Receptacle Rear Mounted
Panel Cutout Dimensions
Screw Mounting
.089 - .000 + 0.13 [2.26 - 0.00 ]
+ .005
Number of Contacts
C
Fig. 1 2 1 2 1 2 1 2 1 2 1 2 1 2
9
B
15 21
Full Radius (Typ.)
A Front R .015 [.381] Max. Typ.
25 31 37
Figure 1
C .089 [2.26] A B
51
A + .004 [+ .102] - .000 [- .000] .412 [10.46] .384 [9.75] .562 [14.27] .534 [13.56] .712 [18.08] .684 [17.37] .812 [20.62] .784 [19.91] .962 [24.43] .934 [23.72] 1.112 [28.24] 1.084 [27.53] 1.062 [26.97] 1.034 [26.26]
B + .004 [+ .102] - .000 [- .000] .177 [4.50] .222 [5.64] .177 [4.50] .222 [5.64] .177 [4.50] .222 [5.64] .177 [4.50] .222 [5.64] .177 [4.50] .222 [5.64] .177 [4.50] .222 [5.64] .224 [5.69] .264 [6.71]
C + .005 [+ .127] - .000 [- .000] .570 [14.48] .570 [14.48] .720 [18.29] .720 [18.29] .870 [22.10] .870 [22.10] .970 [24.64] .970 [24.64] 1.120 [28.45] 1.120 [28.45] 1.270 [32.26] 1.270 [32.26] 1.220 [30.99] 1.220 [30.99]
Full Radius (Typ.)
R
.075 - .000
+ .005 + 0.13
[1.90 - 0.00 ] Rear
116/117
Figure 2
Note: Front mounting preferred.
30
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MIL-DTL-83513 Cross Reference
Microminiature D Connectors
MCK (Metal Shell)
Military Part No. M83513/01-A* M83513/01-B* M83513/01-C* M83513/01-D* M83513/01-E* M83513/01-F* M83513/01-G* M83513/01-H* M83513/02-A* M83513/02-B* M83513/02-C* M83513/02-D* M83513/02-E* M83513/02-F* M83513/02-G* M83513/02-H* M83513/03-A01* M83513/03-B01* M83513/03-C01* M83513/03-D01* M83513/03-E01* M83513/03-F01* M83513/03-G01* M83513/03-H01* M83513/03-A02* M83513/03-B02* M83513/03-C02* M83513/03-D02* M83513/03-E02* M83513/03-F02* M83513/03-G02* M83513/03-H02* M83513/03-A03* M83513/03-B03* M83513/03-C03* M83513/03-D03* M83513/03-E03* M83513/03-F03* M83513/03-G03* M83513/03-H03* M83513/03-A04* M83513/03-B04* M83513/03-C04* M83513/03-D04* M83513/03-E04* M83513/03-F04* M83513/03-G04* M83513/03-H04* M83513/03-A05* M83513/03-B05* M83513/03-C05* M83513/03-D05* M83513/03-E05* M83513/03-F05* M83513/03-G05* M83513/03-H05* M83513/03-A06* M83513/03-B06* M83513/03-C06* M83513/03-D06* MICRODOT Part No. MCK-**-B- 9PS MCK-**-B- 15PS MCK-**-B- 21PS MCK-**-B- 25PS MCK-**-B- 31PS MCK-**-B- 37PS MCK-**-B- 51PS MCK-**-B-100PS MCK-**-B- 9SS MCK-**-B- 15SS MCK-**-B- 21SS MCK-**-B- 25SS MCK-**-B- 31SS MCK-**-B- 37SS MCK-**-B- 51SS MCK-**-B-100SS MCK-**-B- 9P6G1-18.0 MCK-**-B- 15P6G1-18.0 MCK-**-B- 21P6G1-18.0 MCK-**-B- 25P6G1-18.0 MCK-**-B- 31P6G1-18.0 MCK-**-B- 37P6G1-18.0 MCK-**-B- 51P6G1-18.0 MCK-**-B-100P6G1-18.0 MCK-**-B- 9P6G1-36.0 MCK-**-B- 15P6G1-36.0 MCK-**-B- 21P6G1-36.0 MCK-**-B- 25P6G1-36.0 MCK-**-B- 31P6G1-36.0 MCK-**-B- 37P6G1-36.0 MCK-**-B- 51P6G1-36.0 MCK-**-B-100P6G1-36.0 MCK-**-B- 9P6G9-18.0 MCK-**-B- 15P6G9-18.0 MCK-**-B- 21P6G9-18.0 MCK-**-B- 25P6G9-18.0 MCK-**-B- 31P6G9-18.0 MCK-**-B- 37P6G9-18.0 MCK-**-B- 51P6G9-18.0 MCK-**-B-100P6G9-18.0 MCK-**-B- 9P6G9-36.0 MCK-**-B- 15P6G9-36.0 MCK-**-B- 21P6G9-36.0 MCK-**-B- 25P6G9-36.0 MCK-**-B- 31P6G9-36.0 MCK-**-B- 37P6G9-36.0 MCK-**-B- 51P6G9-36.0 MCK-**-B-100P6G9-36.0 MCK-**-B- 9P5L4-0.5 MCK-**-B- 15P5L4-0.5 MCK-**-B- 21P5L4-0.5 MCK-**-B- 25P5L4-0.5 MCK-**-B- 31P5L4-0.5 MCK-**-B- 37P5L4-0.5 MCK-**-B- 51P5L4-0.5 MCK-**-B-100P5L4-0.5 MCK-**-B- 9P5L4-1.0 MCK-**-B- 15P5L4-1.0 MCK-**-B- 21P5L4-1.0 MCK-**-B- 25P5L4-1.0 Military Part No. M83513/03-E06* M83513/03-F06* M83513/03-G06* M83513/03-H06* M83513/03-A07* M83513/03-B07* M83513/03-C07* M83513/03-D07* M83513/03-E07* M83513/03-F07* M83513/03-G07* M83513/03-H07* M83513/03-A08* M83513/03-B08* M83513/03-C08* M83513/03-D08* M83513/03-E08* M83513/03-F08* M83513/03-G08* M83513/03-H08* M83513/03-A09* M83513/03-B09* M83513/03-C09* M83513/03-D09* M83513/03-E09* M83513/03-F09* M83513/03-G09* M83513/03-H09* M83513/03-A10* M83513/03-B10* M83513/03-C10* M83513/03-D10* M83513/03-E10* M83513/03-F10* M83513/03-G10* M83513/03-H10* M83513/03-A11* M83513/03-B11* M83513/03-C11* M83513/03-D11* M83513/03-E11* M83513/03-F11* M83513/03-G11* M83513/03-H11* M83513/03-A12* M83513/03-B12* M83513/03-C12* M83513/03-D12* M83513/03-E12* M83513/03-F12* M83513/03-G12* M83513/03-H12* M83513/03-A13* M83513/03-B13* M83513/03-C13* M83513/03-D13* M83513/03-E13* M83513/03-F13* M83513/03-G13* M83513/03-H13* MICRODOT Part No. MCK-**-B- 31P5L4-1.0 MCK-**-B- 37P5L4-1.0 MCK-**-B- 51P5L4-1.0 MCK-**-B-100P5L4-1.0 MCK-**-B- 9P5L5-0.5 MCK-**-B- 15P5L5-0.5 MCK-**-B- 21P5L5-0.5 MCK-**-B- 25P5L5-0.5 MCK-**-B- 31P5L5-0.5 MCK-**-B- 37P5L5-0.5 MCK-**-B- 51P5L5-0.5 MCK-**-B-100P5L5-0.5 MCK-**-B- 9P5L5-1.0 MCK-**-B- 15P5L5-1.0 MCK-**-B- 21P5L5-1.0 MCK-**-B- 25P5L5-1.0 MCK-**-B- 31P5L5-1.0 MCK-**-B- 37P5L5-1.0 MCK-**-B- 51P5L5-1.0 MCK-**-B-100P5L5-1.0 MCK-**-B- 9P6Q1-18.0 MCK-**-B- 15P6Q1-18.0 MCK-**-B- 21P6Q1-18.0 MCK-**-B- 25P6Q1-18.0 MCK-**-B- 31P6Q1-18.0 MCK-**-B- 37P6Q1-18.0 MCK-**-B- 51P6Q1-18.0 MCK-**-B-100P6Q1-18.0 MCK-**-B- 9P6Q1-36.0 MCK-**-B- 15P6Q1-36.0 MCK-**-B- 21P6Q1-36.0 MCK-**-B- 25P6Q1-36.0 MCK-**-B- 31P6Q1-36.0 MCK-**-B- 37P6Q1-36.0 MCK-**-B- 51P6Q1-36.0 MCK-**-B-100P6Q1-36.0 MCK-**-B- 9P6Q9-18.0 MCK-**-B- 15P6Q9-18.0 MCK-**-B- 21P6Q9-18.0 MCK-**-B- 25P6Q9-18.0 MCK-**-B- 31P6Q9-18.0 MCK-**-B- 37P6Q9-18.0 MCK-**-B- 51P6Q9-18.0 MCK-**-B-100P6Q9-18.0 MCK-**-B- 9P6Q9-36.0 MCK-**-B- 15P6Q9-36.0 MCK-**-B- 21P6Q9-36.0 MCK-**-B- 25P6Q9-36.0 MCK-**-B- 31P6Q9-36.0 MCK-**-B- 37P6Q9-36.0 MCK-**-B- 51P6Q9-36.0 MCK-**-B-100P6Q9-36.0 MCK-**-B- 9P6G1-72.0 MCK-**-B- 1 5P6G1-72.0 MCK-**-B- 21P6G1-72.0 MCK-**-B- 25P6G1-72.0 MCK-**-B- 31P6G1-72.0 MCK-**-B- 37P6G1-72.0 MCK-**-B- 51P6G1-72.0 MCK-**-B-100P6G1-72.0 Military Part No. M83513/03-A14* M83513/03-B14* M83513/03-C14* M83513/03-D14* M83513/03-E14* M83513/03-F14* M83513/03-G14* M83513/03-H14* M83513/03-A15* M83513/03-B15* M83513/03-C15* M83513/03-D15* M83513/03-E15* M83513/03-F15* M83513/03-G15* M83513/03-H15* M83513/03-A16* M83513/03-B16* M83513/03-C16* M83513/03-D16* M83513/03-E16* M83513/03-F16* M83513/03-G16* M83513/03-H16* M83513/04-A01* M83513/04-B01* M83513/04-C01* M83513/04-D01* M83513/04-E01* M83513/04-F01* M83513/04-G01* M83513/04-H01* M83513/04-A02* M83513/04-B02* M83513/04-C02* M83513/04-D02* M83513/04-E02* M83513/04-F02* M83513/04-G02* M83513/04-H02* M83513/04-A03* M83513/04-B03* M83513/04-C03* M83513/04-D03* M83513/04-E03* M83513/04-F03* M83513/04-G03* M83513/04-H03* M83513/04-A04* M83513/04-B04* M83513/04-C04* M83513/04-D04* M83513/04-E04* M83513/04-F04* M83513/04-G04* M83513/04-H04* M83513/04-A05* M83513/04-B05* M83513/04-C05* M83513/04-D05* MICRODOT Part No. MCK-**-B- 9P6G9-72.0 MCK-**-B- 15P6G9-72.0 MCK-**-B- 21P6G9-72.0 MCK-**-B- 25P6G9-72.0 MCK-**-B- 31P6G9-72.0 MCK-**-B- 37P6G9-72.0 MCK-**-B- 51P6G9-72.0 MCK-**-B-100P6G9-72.0 MCK-**-B- 9P6Q1-72.0 MCK-**-B- 15P6Q1-72.0 MCK-**-B- 21P6Q1-72.0 MCK-**-B- 25P6Q1-72.0 MCK-**-B- 31P6Q1-72.0 MCK-**-B- 37P6Q1-72.0 MCK-**-B- 51P6Q1-72.0 MCK-**-B-100P6Q1-72.0 MCK-**-B- 9P6Q9-72.0 MCK-**-B- 15P6Q9-72.0 MCK-**-B- 21P6Q9-72.0 MCK-**-B- 25P6Q9-72.0 MCK-**-B- 31P6Q9-72.0 MCK-**-B- 37P6Q9-72.0 MCK-**-B- 51P6Q9-72.0 MCK-**-B-100P6Q9-72.0 MCK-**-B- 9S6G1-18.0 MCK-**-B- 15S6G1-18.0 MCK-**-B- 21S6G1-18.0 MCK-**-B- 25S6G1-18.0 MCK-**-B- 31S6G1-18.0 MCK-**-B- 37S6G1-18.0 MCK-**-B- 51S6G1-18.0 MCK-**-B-100S6G1-18.0 MCK-**-B- 9S6G1-36.0 MCK-**-B- 15S6G1-36.0 MCK-**-B- 21S6G1-36.0 MCK-**-B- 25S6G1-36.0 MCK-**-B- 31S6G1-36.0 MCK-**-B- 37S6G1-36.0 MCK-**-B- 51S6G1-36.0 MCK-**-B-100S6G1-36.0 MCK-**-B- 9S6G9-18.0 MCK-**-B- 15S6G9-18.0 MCK-**-B- 21S6G9-18.0 MCK-**-B- 25S6G9-18.0 MCK-**-B- 31S6G9-18.0 MCK-**-B- 37S6G9-18.0 MCK-**-B- 51S6G9-18.0 MCK-**-B-100S6G9-18.0 MCK-**-B- 9S6G9-36.0 MCK-**-B- 15S6G9-36.0 MCK-**-B- 21S6G9-36.0 MCK-**-B- 25S6G9-36.0 MCK-**-B- 31S6G9-36.0 MCK-**-B- 37S6G9-36.0 MCK-**-B- 51S6G9-36.0 MCK-**-B-100S6G9-36.0 MCK-**-B- 9S5L4-0.5 MCK-**-B- 15S5L4-0.5 MCK-**-B- 21S5L4-0.5 MCK-**-B- 25S5L4-0.5
1
31
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MIL-DTL-83513 Cross Reference (Continued) MCK (Metal Shell) (Continued)
Military Part No. M83513/04-E05* M83513/04-F05* M83513/04-G05* M83513/04-H05* M83513/04-A06* M83513/04-B06* M83513/04-C06* M83513/04-D06* M83513/04-E06* M83513/04-F06* M83513/04-G06* M83513/04-H06* M83513/04-A07* M83513/04-B07* M83513/04-C07* M83513/04-D07* M83513/04-E07* M83513/04-F07* M83513/04-G07* M83513/04-H07* M83513/04-A08* M83513/04-B08* M83513/04-C08* M83513/04-D08* M83513/04-E08* M83513/04-F08* M83513/04-G08* M83513/04-H08* M83513/04-A09* M83513/04-B09* M83513/04-C09* MICRODOT Part No. MCK-**-B- 31S5L4-0.5 MCK-**-B- 37S5L4-0.5 MCK-**-B- 51S5L4-0.5 MCK-**-B-100S5L4-0.5 MCK-**-B- 9S5L4-1.0 MCK-**-B- 15S5L4-1.0 MCK-**-B- 21S5L4-1.0 MCK-**-B- 25S5L4-1.0 MCK-**-B- 31S5L4-1.0 MCK-**-B- 37S5L4-1.0 MCK-**-B- 51S5L4-1.0 MCK-**-B-100S5L4-1.0 MCK-**-B- 9S5L5-0.5 MCK-**-B- 15S5L5-0.5 MCK-**-B- 21S5L5-0.5 MCK-**-B- 25S5L5-0.5 MCK-**-B- 31S5L5-0.5 MCK-**-B- 37S5L5-0.5 MCK-**-B- 51S5L5-0.5 MCK-**-B-100S5L5-0.5 MCK-**-B- 9S5L5-1.0 MCK-**-B- 15S5L5-1.0 MCK-**-B- 21S5L5-1.0 MCK-**-B- 25S5L5-1.0 MCK-**-B- 31S5L5-1.0 MCK-**-B- 37S5L5-1.0 MCK-**-B- 51S5L5-1.0 MCK-**-B-100S5L5-1.0 MCK-**-B- 9S6Q1-18.0 MCK-**-B- 15S6Q1-18.0 MCK-**-B- 21S6Q1-18.0 Military Part No. M83513/04-D09* M83513/04-E09* M83513/04-F09* M83513/04-G09* M83513/04-H09* M83513/04-A10* M83513/04-B10* M83513/04-C10* M83513/04-D10* M83513/04-E10* M83513/04-F10* M83513/04-G10* M83513/04-H10* M83513/04-A11* M83513/04-B11* M83513/04-C11* M83513/04-D11* M83513/04-E11* M83513/04-F11* M83513/04-G11* M83513/04-H11* M83513/04-A12* M83513/04-B12* M83513/04-C12* M83513/04-D12* M83513/04-E12* M83513/04-F12* M83513/04-G12* M83513/04-H12* M83513/04-A13* M83513/04-B13* MICRODOT Part No. MCK-**-B- 25S6Q1-18.0 MCK-**-B- 31S6Q1-18.0 MCK-**-B- 37S6Q1-18.0 MCK-**-B- 51S6Q1-18.0 MCK-**-B-100S6Q1-18.0 MCK-**-B- 9S6Q1-36.0 MCK-**-B- 15S6Q1-36.0 MCK-**-B- 21S6Q1-36.0 MCK-**-B- 25S6Q1-36.0 MCK-**-B- 31S6Q1-36.0 MCK-**-B- 37S6Q1-36.0 MCK-**-B- 51S6Q1-36.0 MCK-**-B-100S6Q1-36.0 MCK-**-B- 9S6Q9-18.0 MCK-**-B- 15S6Q9-18.0 MCK-**-B- 21S6Q9-18.0 MCK-**-B- 25S6Q9-18.0 MCK-**-B- 31S6Q9-18.0 MCK-**-B- 37S6Q9-18.0 MCK-**-B- 51S6Q9-18.0 MCK-**-B-100S6Q9-18.0 MCK-**-B- 9S6Q9-36.0 MCK-**-B- 15S6Q9-36.0 MCK-**-B- 21S6Q9-36.0 MCK-**-B- 25S6Q9-36.0 MCK-**-B- 31S6Q9-36.0 MCK-**-B- 37S6Q9-36.0 MCK-**-B- 51S6Q9-36.0 MCK-**-B-100S6Q9-36.0 MCK-**-B- 9S6G1-72.0 MCK-**-B- 15S6G1-72.0 Military Part No. M83513/04-C13* M83513/04-D13* M83513/04-E13* M83513/04-F13* M83513/04-G13* M83513/04-H13* M83513/04-A14* M83513/04-B14* M83513/04-C14* M83513/04-D14* M83513/04-E14* M83513/04-F14* M83513/04-G14* M83513/04-H14* M83513/04-A15* M83513/04-B15* M83513/04-C15* M83513/04-D15* M83513/04-E15* M83513/04-F15* M83513/04-G15* M83513/04-H15* M83513/04-A16* M83513/04-B16* M83513/04-C16* M83513/04-D16* M83513/04-E16* M83513/04-F16* M83513/04-G16* M83513/04-H16* MICRODOT Part No. MCK-**-B- 21S6G1-72.0 MCK-**-B- 25S6G1-72.0 MCK-**-B- 31S6G1-72.0 MCK-**-B- 37S6G1-72.0 MCK-**-B- 51S6G1-72.0 MCK-**-B-100S6G1-72.0 MCK-**-B- 9S6G9-72.0 MCK-**-B- 15S6G9-72.0 MCK-**-B- 21S6G9-72.0 MCK-**-B- 25S6G9-72.0 MCK-**-B- 31S6G9-72.0 MCK-**-B- 37S6G9-72.0 MCK-**-B- 51S6G9-72.0 MCK-**-B-100S6G9-72.0 MCK-**-B- 9S6Q1-72.0 MCK-**-B- 15S6Q1-72.0 MCK-**-B- 21S6Q1-72.0 MCK-**-B- 25S6Q1-72.0 MCK-**-B- 31S6Q1-72.0 MCK-**-B- 37S6Q1-72.0 MCK-**-B- 51S6Q1-72.0 MCK-**-B-100S6Q1-72.0 MCK-**-B- 9S6Q9-72.0 MCK-**-B- 15S6Q9-72.0 MCK-**-B- 21S6Q9-72.0 MCK-**-B- 25S6Q9-72.0 MCK-**-B- 31S6Q9-72.0 MCK-**-B- 37S6Q9-72.0 MCK-**-B- 51S6Q9-72.0 MCK-**-B-100S6Q9-72.0
*C = Cadmium or N = Nickel (space applications only) **C2 = Cadmium or N1 = Nickel (space applications only)
Hardware
Military Part No. M83513/05-02 M83513/05-12 M83513/05-03 M83513/05-13 MICRODOT Part No. "A. HD, J/S, L.F, #2" "A. HD, J/S, L.F, #4" "A. HD, J/S,H.F, #2" "A. HD, J/S, H.F. #4" Military Part No. M83513/05-05 M83513/05-15 M83513/05-06 M83513/05-16 MICRODOT Part No. "S. HD, J/S, L.F, #2" "S. HD, J/S, L.F, #4" "S. HD, J/S, H.F, #2" "S. HD, J/S, H.F, #4" Military Part No. M83513/05-07 M83513/05-17 MICRODOT Part No. "JACKPOST ASSY #2" "JACKPOST ASSY, #4"
MCDR (Plastic Shell)
Military Part No. M83513/06-A M83513/06-B M83513/06-C M83513/06-D M83513/06-E M83513/06-F M83513/06-G M83513/07-A M83513/07-B M83513/07-C M83513/07-D M83513/07-E M83513/07-F MICRODOT Part No. MCDR3-B- 9PS MCDR3-B-15PS MCDR3-B-21PS MCDR3-B-25PS MCDR3-B-31PS MCDR3-B-37PS MCDR3-B-51PS MCDR3-B- 9SS MCDR3-B-15SS MCDR3-B-21SS MCDR3-B-25SS MCDR3-B-31SS MCDR3-B-37SS Military Part No. M83513/07-G M83513/08-A01 M83513/08-B01 M83513/08-C01 M83513/08-D01 M83513/08-E01 M83513/08-F01 M83513/08-G01 M83513/08-A02 M83513/08-B02 M83513/08-C02 M83513/08-D02 M83513/08-E02 MICRODOT Part No. MCDR3-B-51SS MCDR3-B- 9P6G1-18.0 MCDR3-B-15P6G1-18.0 MCDR3-B-21P6G1-18.0 MCDR3-B-25P6G1-18.0 MCDR3-B-31P6G1-18.0 MCDR3-B-37P6G1-18.0 MCDR3-B-51P6G1-18.0 MCDR3-B- 9P6G1-36.0 MCDR3-B-15P6G1-36.0 MCDR3-B-21P6G1-36.0 MCDR3-B-25P6G1-36.0 MCDR3-B-31P6G1-36.0 Military Part No. M83513/08-F02 M83513/08-G02 M83513/08-A03 M83513/08-B03 M83513/08-C03 M83513/08-D03 M83513/08-E03 M83513/08-F03 M83513/08-G03 M83513/08-A04 M83513/08-B04 M83513/08-C04 M83513/08-D04 MICRODOT Part No. MCDR3-B-37P6G1-36.0 MCDR3-B-51P6G1-36.0 MCDR3-B- 9P6G9-18.0 MCDR3-B-15P6G9-18.0 MCDR3-B-21P6G9-18.0 MCDR3-B-25P6G9-18.0 MCDR3-B-31P6G9-18.0 MCDR3-B-37P6G9-18.0 MCDR3-B-51P6G9-18.0 MCDR3-B- 9P6G9-36.0 MCDR3-B-15P6G9-36.0 MCDR3-B-21P6G9-36.0 MCDR3-B-25P6G9-36.0
32
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MIL-DTL-83513 Cross Reference (Continued)
Microminiature D Connectors
MCDR (Plastic Shell) (Continued)
Military Part No. M83513/08-E04 M83513/08-F04 M83513/08-G04 M83513/08-A05 M83513/08-B05 M83513/08-C05 M83513/08-D05 M83513/08-E05 M83513/08-F05 M83513/08-G05 M83513/08-A06 M83513/08-B06 M83513/08-C06 M83513/08-D06 M83513/08-E06 M83513/08-F06 M83513/08-G06 M83513/08-A07 M83513/08-B07 M83513/08-C07 M83513/08-D07 M83513/08-E07 M83513/08-F07 M83513/08-G07 M83513/08-A08 M83513/08-B08 M83513/08-C08 M83513/08-D08 M83513/08-E08 M83513/08-F08 M83513/08-G08 M83513/08-A09 M83513/08-B09 M83513/08-C09 M83513/08-D09 M83513/08-E09 M83513/08-F09 M83513/08-G09 M83513/08-A10 M83513/08-B10 M83513/08-C10 M83513/08-D10 M83513/08-E10 M83513/08-F10 M83513/08-G10 M83513/08-A11 M83513/08-B11 M83513/08-C11 M83513/08-D11 M83513/08-E11 M83513/08-F11 M83513/08-G11 M83513/08-A12 M83513/08-B12 M83513/08-C12 M83513/08-D12 M83513/08-E12 M83513/08-F12 M83513/08-G12 M83513/08-A13 MICRODOT Part No. MCDR3-B-31P6G9-36.0 MCDR3-B-37P6G9-36.0 MCDR3-B-51P6G9-36.0 MCDR3-B- 9P5L4-0.5 MCDR3-B-15P5L4-0.5 MCDR3-B-21P5L4-0.5 MCDR3-B-25P5L4-0.5 MCDR3-B-31P5L4-0.5 MCDR3-B-37P5L4-0.5 MCDR3-B-51P5L4-0.5 MCDR3-B- 9P5L4-1.0 MCDR3-B-15P5L4-1.0 MCDR3-B-21P5L4-1.0 MCDR3-B-25P5L4-1.0 MCDR3-B-31P5L4-1.0 MCDR3-B-37P5L4-1.0 MCDR3-B-51P5L4-1.0 MCDR3-B- 9P5L5-0.5 MCDR3-B-15P5L5-0.5 MCDR3-B-21P5L5-0.5 MCDR3-B-25P5L5-0.5 MCDR3-B-31P5L5-0.5 MCDR3-B-37P5L5-0.5 MCDR3-B-51P5L5-0.5 MCDR3-B- 9P5L5-1.0 MCDR3-B-15P5L5-1.0 MCDR3-B-21P5L5-1.0 MCDR3-B-25P5L5-1.0 MCDR3-B-31P5L5-1.0 MCDR3-B-37P5L5-1.0 MCDR3-B-51P5L5-1.0 MCDR3-B- 9P6Q1-18.0 MCDR3-B-15P6Q1-18.0 MCDR3-B-21P6Q1-18.0 MCDR3-B-25P6Q1-18.0 MCDR3-B-31P6Q1-18.0 MCDR3-B-37P6Q1-18.0 MCDR3-B-51P6Q1-18.0 MCDR3-B- 9P6Q1-36.0 MCDR3-B-15P6Q1-36.0 MCDR3-B-21P6Q1-36.0 MCDR3-B-25P6Q1-36.0 MCDR3-B-31P6Q1-36.0 MCDR3-B-37P6Q1-36.0 MCDR3-B-51P6Q1-36.0 MCDR3-B- 9P6Q9-18.0 MCDR3-B-15P6Q9-18.0 MCDR3-B-21P6Q9-18.0 MCDR3-B-25P6Q9-18.0 MCDR3-B-31P6Q9-18.0 MCDR3-B-37P6Q9-18.0 MCDR3-B-51P6Q9-18.0 MCDR3-B- 9P6Q9-36.0 MCDR3-B-15P6Q9-36.0 MCDR3-B-21P6Q9-36.0 MCDR3-B-25P6Q9-36.0 MCDR3-B-31P6Q9-36.0 MCDR3-B-37P6Q9-36.0 MCDR3-B-51P6Q9-36.0 MCDR3-B- 9P6G1-72.0 Military Part No. M83513/08-B13 M83513/08-C13 M83513/08-D13 M83513/08-E13 M83513/08-F13 M83513/08-G13 M83513/08-A14 M83513/08-B14 M83513/08-C14 M83513/08-D14 M83513/08-E14 M83513/08-F14 M83513/08-G14 M83513/08-A15 M83513/08-B15 M83513/08-C15 M83513/08-D15 M83513/08-E15 M83513/08-F15 M83513/08-G15 M83513/08-A16 M83513/08-B16 M83513/08-C16 M83513/08-D16 M83513/08-E16 M83513/08-F16 M83513/08-G16 M83513/09-A01 M83513/09-B01 M83513/09-C01 M83513/09-D01 M83513/09-E01 M83513/09-F01 M83513/09-G01 M83513/09-A02 M83513/09-B02 M83513/09-C02 M83513/09-D02 M83513/09-E02 M83513/09-F02 M83513/09-G02 M83513/09-A03 M83513/09-B03 M83513/09-C03 M83513/09-D03 M83513/09-E03 M83513/09-F03 M83513/09-G03 M83513/09-A04 M83513/09-B04 M83513/09-C04 M83513/09-D04 M83513/09-E04 M83513/09-F04 M83513/09-G04 M83513/09-A05 M83513/09-B05 M83513/09-C05 M83513/09-D05 M83513/09-E05 MICRODOT Part No. MCDR3-B-15P6G1-72.0 MCDR3-B-21P6G1-72.0 MCDR3-B-25P6G1-72.0 MCDR3-B-31P6G1-72.0 MCDR3-B-37P6G1-72.0 MCDR3-B-51P6G1-72.0 MCDR3-B- 9P6G9-72.0 MCDR3-B-15P6G9-72.0 MCDR3-B-21P6G9-72.0 MCDR3-B-25P6G9-72.0 MCDR3-B-31P6G9-72.0 MCDR3-B-37P6G9-72.0 MCDR3-B-51P6G9-72.0 MCDR3-B- 9P6Q1-72.0 MCDR3-B-15P6Q1-72.0 MCDR3-B-21P6Q1-72.0 MCDR3-B-25P6Q1-72.0 MCDR3-B-31P6Q1-72.0 MCDR3-B-37P6Q1-72.0 MCDR3-B-51P6Q1-72.0 MCDR3-B- 9P6Q9-72.0 MCDR3-B-15P6Q9-72.0 MCDR3-B-21P6Q9-72.0 MCDR3-B-25P6Q9-72.0 MCDR3-B-31P6Q9-72.0 MCDR3-B-37P6Q9-72.0 MCDR3-B-51P6Q9-72.0 MCDR3-B- 9S6G1-18.0 MCDR3-B-15S6G1-18.0 MCDR3-B-21S6G1-18.0 MCDR3-B-25S6G1-18.0 MCDR3-B-31S6G1-18.0 MCDR3-B-37S6G1-18.0 MCDR3-B-51S6G1-18.0 MCDR3-B- 9S6G1-36.0 MCDR3-B-15S6G1-36.0 MCDR3-B-21S6G1-36.0 MCDR3-B-25S6G1-36.0 MCDR3-B-31S6G1-36.0 MCDR3-B-37S6G1-36.0 MCDR3-B-51S6G1-36.0 MCDR3-B- 9S6G9-18.0 MCDR3-B- 15S6G9-18.0 MCDR3-B- 21S6G9-18.0 MCDR3-B-25S6G9-18.0 MCDR3-B-31S6G9-18.0 MCDR3-B-37S6G9-18.0 MCDR3-B-51S6G9-18.0 MCDR3-B- 9S6G9-36.0 MCDR3-B-15S6G9-36.0 MCDR3-B-21S6G9-36.0 MCDR3-B-25S6G9-36.0 MCDR3-B-31S6G9-36.0 MCDR3-B-37S6G9-36.0 MCDR3-B-51S6G9-36.0 MCDR3-B- 9S5L4-0.5 MCDR3-B-15S5L4-0.5 MCDR3-B-21S5L4-0.5 MCDR3-B-25S5L4-0.5 MCDR3-B-31S5L4-0.5 Military Part No. M83513/09-F05 M83513/09-G05 M83513/09-A06 M83513/09-B06 M83513/09-C06 M83513/09-D06 M83513/09-E06 M83513/09-F06 M83513/09-G06 M83513/09-A07 M83513/09-B07 M83513/09-C07 M83513/09-D07 M83513/09-E07 M83513/09-F07 M83513/09-G07 M83513/09-A08 M83513/09-B08 M83513/09-C08 M83513/09-D08 M83513/09-E08 M83513/09-F08 M83513/09-G08 M83513/09-A09 M83513/09-B09 M83513/09-C09 M83513/09-D09 M83513/09-E09 M83513/09-F09 M83513/09-G09 M83513/09-A10 M83513/09-B10 M83513/09-C10 M83513/09-D10 M83513/09-E10 M83513/09-F10 M83513/09-G10 M83513/09-A11 M83513/09-B11 M83513/09-C11 M83513/09-D11 M83513/09-E11 M83513/09-F11 M83513/09-G11 M83513/09-A12 M83513/09-B12 M83513/09-C12 M83513/09-D12 M83513/09-E12 M83513/09-F12 M83513/09-G12 M83513/09-A13 M83513/09-B13 M83513/09-C13 M83513/09-D13 M83513/09-E13 M83513/09-F13 M83513/09-G13 M83513/09-A14 M83513/09-B14 MICRODOT Part No. MCDR3-B-37S5L4-0.5 MCDR3-B-51S5L4-0.5 MCDR3-B- 9S5L4-1.0 MCDR3-B-15S5L4-1.0 MCDR3-B-21S5L4-1.0 MCDR3-B-25S5L4-1.0 MCDR3-B-31S5L4-1.0 MCDR3-B-37S5L4-1.0 MCDR3-B-51S5L4-1.0 MCDR3-B- 9S5L5-0.5 MCDR3-B-15S5L5-0.5 MCDR3-B-21S5L5-0.5 MCDR3-B-25S5L5-0.5 MCDR3-B-31S5L5-0.5 MCDR3-B-37S5L5-0.5 MCDR3-B-51S5L5-0.5 MCDR3-B- 9S5L5-1.0 MCDR3-B-15S5L5-1.0 MCDR3-B-21S5L5-1.0 MCDR3-B-25S5L5-1.0 MCDR3-B-31S5L5-1.0 MCDR3-B-37S5L5-1.0 MCDR3-B-51S5L5-1.0 MCDR3-B- 9S6Q1-18.0 MCDR3-B-15S6Q1-18.0 MCDR3-B-21S6Q1-18.0 MCDR3-B-25S6Q1-18.0 MCDR3-B-31S6Q1-18.0 MCDR3-B-37S6Q1-18.0 MCDR3-B-51S6Q1-18.0 MCDR3-B- 9S6Q1-36.0 MCDR3-B-15S6Q1-36.0 MCDR3-B-21S6Q1-36.0 MCDR3-B-25S6Q1-36.0 MCDR3-B-31S6Q1-36.0 MCDR3-B-37S6Q1-36.0 MCDR3-B-51S6Q1-36.0 MCDR3-B- 9S6Q9-18.0 MCDR3-B-15S6Q9-18.0 MCDR3-B-21S6Q9-18.0 MCDR3-B-25S6Q9-18.0 MCDR3-B-31S6Q9-18.0 MCDR3-B-37S6Q9-18.0 MCDR3-B-51S6Q9-18.0 MCDR3-B- 9S6Q9-36.0 MCDR3-B-15S6Q9-36.0 MCDR3-B-21S6Q9-36.0 MCDR3-B-25S6Q9-36.0 MCDR3-B-31S6Q9-36.0 MCDR3-B-37S6Q9-36.0 MCDR3-B-51S6Q9-36.0 MCDR3-B- 9S6G1-72.0 MCDR3-B-15S6G1-72.0 MCDR3-B-21S6G1-72.0 MCDR3-B-25S6G1-72.0 MCDR3-B-31S6G1-72.0 MCDR3-B-37S6G1-72.0 MCDR3-B-51S6G1-72.0 MCDR3-B- 9S6G9-72.0 MCDR3-B-15S6G9-72.0
1
33
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MIL-DTL-83513 Cross Reference (Continued) MCDR (Plastic Shell) (Continued)
Military Part No. M83513/09-C14 M83513/09-D14 M83513/09-E14 M83513/09-F14 M83513/09-G14 M83513/09-A15 M83513/09-B15 MICRODOT Part No. MCDR3-B-21S6G9-72.0 MCDR3-B-25S6G9-72.0 MCDR3-B-31S6G9-72.0 MCDR3-B-37S6G9-72.0 MCDR3-B-51S6G9-72.0 MCDR3-B- 9S6Q1-72.0 MCDR3-B-15S6Q1-72.0 Military Part No. M83513/09-C15 M83513/09-D15 M83513/09-E15 M83513/09-F15 M83513/09-G15 M83513/09-A16 M83513/09-B16 MICRODOT Part No. MCDR3-B-21S6Q1-72.0 MCDR3-B-25S6Q1-72.0 MCDR3-B-31S6Q1-72.0 MCDR3-B-37S6Q1-72.0 MCDR3-B-51S6Q1-72.0 MCDR3-B- 9S6Q9-72.0 MCDR3-B-15S6Q9-72.0 Military Part No. M83513/09-C16 M83513/09-D16 M83513/09-E16 M83513/09-F16 M83513/09-G16 MICRODOT Part No. MCDR3-B-21S6Q9-72.0 MCDR3-B-25S6Q9-72.0 MCDR3-B-31S6Q9-72.0 MCDR3-B-37S6Q9-72.0 MCDR3-B-51S6Q9-72.0
MCK (Metal Shell)
Military Part No. M83513/10-A01*N M83513/10-B01*N M83513/10-C01*N M83513/10-D01*N M83513/10-E01*N M83513/10-F01*N M83513/10-A01*P M83513/10-B01*P M83513/10-C01*P M83513/10-D01*P M83513/10-E01*P M83513/10-F01*P M83513/10-A02*N M83513/10-B02*N M83513/10-C02*N M83513/10-D02*N M83513/10-E02*N M83513/10-F02*N M83513/10-A02*P M83513/10-B02*P M83513/10-C02*P M83513/10-D02*P M83513/10-E02*P M83513/10-F02*P M83513/10-A03*N M83513/10-B03*N M83513/10-C03*N M83513/10-D03*N M83513/10-E03*N M83513/10-F03*N M83513/10-A03*P M83513/10-B03*P M83513/10-C03*P M83513/10-D03*P M83513/10-E03*P M83513/10-F03*P M83513/11-G01*N M83513/11-G01*P M83513/11-G02*N M83513/11-G02*P M83513/11-G03*N M83513/11-G03*P M83513/12-H01*N M83513/12-H01*P M83513/12-H02*N M83513/12-H02*P M83513/12-H03*N MICRODOT Part No. MCK-**-B- 9PRT1 MCK-**-B- 15PRT1 MCK-**-B- 21PRT1 MCK-**-B- 25PRT1 MCK-**-B- 31PRT1 MCK-**-B- 37PRT1 MCK-**-P- 9PRT1 MCK-**-P- 15PRT1 MCK-**-P- 21PRT1 MCK-**-P- 25PRT1 MCK-**-P- 31PRT1 MCK-**-P- 37PRT1 MCK-**-B- 9PRT1A MCK-**-B- 15PRT1A MCK-**-B- 21PRT1A MCK-**-B- 25PRT1A MCK-**-B- 31PRT1A MCK-**-B- 37PRT1A MCK-**-P- 9PRT1A MCK-**-P- 15PRT1A MCK-**-P- 21PRT1A MCK-**-P- 25PRT1A MCK-**-P- 31PRT1A MCK-**-P- 37PRT1A MCK-**-B- 9PRT1B MCK-**-B- 15PRT1B MCK-**-B- 21PRT1B MCK-**-B- 25PRT1B MCK-**-B- 31PRT1B MCK-**-B- 37PRT1B MCK-**-P- 9PRT1B MCK-**-P- 15PRT1B MCK-**-P- 21PRT1B MCK-**-P- 25PRT1B MCK-**-P- 31PRT1B MCK-**-P- 37PRT1B MCK-**-B- 51PRT1 MCK-**-P- 51PRT1 MCK-**-B- 51PRT1A MCK-**-P- 51PRT1A MCK-**-B- 51PRT1B MCK-**-P- 51PRT1B MCK-**-B-100PRT1 MCK-**-P-100PRT1 MCK-**-B-100PRT1A MCK-**-P-100PRT1A MCK-**-B-100PRT1B Military Part No. M83513/12-H03*P M83513/13-A01*N M83513/13-B01*N M83513/13-C01*N M83513/13-D01*N M83513/13-E01*N M83513/13-F01*N M83513/13-A01*P M83513/13-B01*P M83513/13-C01*P M83513/13-D01*P M83513/13-E01*P M83513/13-F01*P M83513/13-A02*N M83513/13-B02*N M83513/13-C02*N M83513/13-D02*N M83513/13-E02*N M83513/13-F02*N M83513/13-A02*P M83513/13-B02*P M83513/13-C02*P M83513/13-D02*P M83513/13-E02*P M83513/13-F02*P M83513/13-A03*N M83513/13-B03*N M83513/13-C03*N M83513/13-D03*N M83513/13-E03*N M83513/13-F03*N M83513/13-A03*P M83513/13-B03*P M83513/13-C03*P M83513/13-D03*P M83513/13-E03*P M83513/13-F03*P M83513/14-G01*N M83513/14-G01*P M83513/14-G02*N M83513/14-G02*P M83513/14-G03*N M83513/14-G03*P M83513/15-H01*N M83513/15-H01*P M83513/15-H02*N M83515/15-H02*P MICRODOT Part No. MCK-**-P-100PRT1B MCK-**-B- 9SRT1 MCK-**-B- 15SRT1 MCK-**-B- 21SRT1 MCK-**-B- 25SRT1 MCK-**-B- 31SRT1 MCK-**-B- 37SRT1 MCK-**-P- 9SRT1 MCK-**-P- 15SRT1 MCK-**-P- 21SRT1 MCK-**-P- 25SRT1 MCK-**-P- 31SRT1 MCK-**-P- 37SRT1 MCK-**-B- 9SRT1A MCK-**-B- 15SRT1A MCK-**-B- 21SRT1A MCK-**-B- 25SRT1A MCK-**-B- 31SRT1A MCK-**-B- 37SRT1A MCK-**-P- 9SRT1A MCK-**-P- 15SRT1A MCK-**-P- 21SRT1A MCK-**-P- 25SRT1A MCK-**-P- 31SRT1A MCK-**-P- 37SRT1A MCK-**-B- 9SRT1B MCK-**-B- 15SRT1B MCK-**-B- 21SRT1B MCK-**-B- 25SRT1B MCK-**-B- 31SRT1B MCK-**-B- 37SRT1B MCK-**-P- 9SRT1B MCK-**-P- 15SRT1B MCK-**-P- 21SRT1B MCK-**-P- 25SRT1B MCK-**-P- 31SRT1B MCK-**-P- 37SRT1B MCK-**-B- 51SRT1 MCK-**-P- 51SRT1 MCK-**-B- 51SRT1A MCK-**-P- 51SRT1A MCK-**-B- 51SRT1B MCK-**-P- 51SRT1B MCK-**-B-100SRT1 MCK-**-P-100SRT1 MCK-**-B-100SRT1A MCK-**-P-100SRT1A Military Part No. M83513/15-H03*N M83513/15-H03*P M83513/16-A01*N M83513/16-B01*N M83513/16-C01*N M83513/16-D01*N M83513/16-E01*N M83513/16-F01*N M83513/16-A01*P M83513/16-B01*P M83513/16-C01*P M83513/16-D01*P M83513/16-E01*P M83513/16-F01*P M83513/16-A02*N M83513/16-B02*N M83513/16-C02*N M83513/16-D02*N M83513/16-E02*N M83513/16-F02*N M83513/16-A02*P M83513/16-B02*P M83513/16-C02*P M83513/16-D02*P M83513/16-E02*P M83513/16-F02*P M83513/16-A03*N M83513/16-B03*N M83513/16-C03*N M83513/16-D03*N M83513/16-E03*N M83513/16-F03*N M83513/16-A03*P M83513/16-B03*P M83513/16-C03*P M83513/16-D03*P M83513/16-E03*P M83513/16-F03*P M83513/17-G01*N M83513/17-G01*P M83513/17-G02*N M83513/17-G02*P M83513/17-G03*N M83513/17-G03*P M83513/18-H01*N M83513/18-H01*P M83513/18-H02*N MICRODOT Part No. MCK-**-B-100SRT1B MCK-**-P-100SRT1B MCK-**-B- 9PRT3 MCK-**-B- 15PRT3 MCK-**-B- 21PRT3 MCK-**-B- 25PRT3 MCK-**-B- 31PRT3 MCK-**-B- 37PRT3 MCK-**-P- 9PRT3 MCK-**-P- 15PRT3 MCK-**-P- 21PRT3 MCK-**-P- 25PRT3 MCK-**-P- 31PRT3 MCK-**-P- 37PRT3 MCK-**-B- 9PRT3A MCK-**-B- 15PRT3A MCK-**-B- 21PRT3A MCK-**-B- 25PRT3A MCK-**-B- 31PRT3A MCK-**-B- 37PRT3A MCK-**-P- 9PRT3A MCK-**-P- 15PRT3A MCK-**-P- 21PRT3A MCK-**-P- 25PRT3A MCK-**-P- 31PRT3A MCK-**-P- 37PRT3A MCK-**-B- 9PRT3B MCK-**-B- 15PRT3B MCK-**-B- 21PRT3B MCK-**-B- 25PRT3B MCK-**-B- 31PRT3B MCK-**-B- 37PRT3B MCK-**-P- 9PRT3B MCK-**-P- 15PRT3B MCK-**-P- 21PRT3B MCK-**-P- 25PRT3B MCK-**-P- 31PRT3B MCK-**-P- 37PRT3B MCK-**-B- 51PRT3 MCK-**-P- 51PRT3 MCK-**-B- 51PRT3A MCK-**-P- 51PRT3A MCK-**-B- 51PRT3B MCK-**-P- 51PRT3B MCK-**-B-100PRT3 MCK-**-P-100PRT3 MCK-**-B-100PRT3A
34
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors MIL-DTL-83513 Cross Reference (Continued)
Microminiature D Connectors
MCK (Metal Shell) (Continued)
Military Part No. M83515/18-H02*P M83513/18-H03*N M83513/18-H03*P M83513/19-A01*N M83513/19-B01*N M83513/19-C01*N M83513/19-D01*N M83513/19-E01*N M83513/19-F01*N M83513/19-A01*P M83513/19-B01*P M83513/19-C01*P M83513/19-D01*P M83513/19-E01*P M83513/19-F01*P M83513/19-A02*N M83513/19-B02*N M83513/19-C02*N M83513/19-D02*N M83513/19-E02*N M83513/19-F02*N M83513/19-A02*P M83513/19-B02*P M83513/19-C02*P M83513/19-D02*P M83513/19-E02*P M83513/19-F02*P M83513/19-A03*N M83513/19-B03*N M83513/19-C03*N M83513/19-D03*N M83513/19-E03*N M83513/19-F03*N M83513/19-A03*P M83513/19-B03*P M83513/19-C03*P M83513/19-D03*P M83513/19-E03*P M83513/19-F03*P M83513/20-G01*N M83513/20-G01*P M83513/20-G02*N M83513/20-G02*P M83513/20-G03*N M83513/20-G03*P M83513/21-H01*N M83513/21-H01*P M83513/21-H02*N M83515/21-H02*P MICRODOT Part No. MCK-**-P-100PRT3A MCK-**-B-100PRT3B MCK-**-P-100PRT3B MCK-**-B- 9SRT3 MCK-**-B- 15SRT3 MCK-**-B- 21SRT3 MCK-**-B- 25SRT3 MCK-**-B- 31SRT3 MCK-**-B- 37SRT3 MCK-**-P- 9SRT3 MCK-**-P- 15SRT3 MCK-**-P- 21SRT3 MCK-**-P- 25SRT3 MCK-**-P- 31SRT3 MCK-**-P- 37SRT3 MCK-**-B- 9SRT3A MCK-**-B- 15SRT3A MCK-**-B- 21SRT3A MCK-**-B- 25SRT3A MCK-**-B- 31SRT3A MCK-**-B- 37SRT3A MCK-**-P- 9SRT3A MCK-**-P- 15SRT3A MCK-**-P- 21SRT3A MCK-**-P- 25SRT3A MCK-**-P- 31SRT3A MCK-**-P- 37SRT3A MCK-**-B- 9SRT3B MCK-**-B- 15SRT3B MCK-**-B- 21SRT3B MCK-**-B- 25SRT3B MCK-**-B- 31SRT3B MCK-**-B- 37SRT3B MCK-**-P- 9SRT3B MCK-**-P- 15SRT3B MCK-**-P- 21SRT3B MCK-**-P- 25SRT3B MCK-**-P- 31SRT3B MCK-**-P- 37SRT3B MCK-**-B- 51SRT3 MCK-**-P- 51SRT3 MCK-**-B- 51SRT3A MCK-**-P- 51SRT3A MCK-**-B- 51SRT3B MCK-**-P- 51SRT3B MCK-**-B-100SRT3 MCK-**-P-100SRT3 MCK-**-B-100SRT3A MCK-**-P-100SRT3A Military Part No. M83513/21-H03*N M83513/21-H03*P M83513/22-A01*N M83513/22-B01*N M83513/22-C01*N M83513/22-D01*N M83513/22-E01*N M83513/22-F01*N M83513/22-A01*P M83513/22-B01*P M83513/22-C01*P M83513/22-D01*P M83513/22-E01*P M83513/22-F01*P M83513/22-A02*N M83513/22-B02*N M83513/22-C02*N M83513/22-D02*N M83513/22-E02*N M83513/22-F02*N M83513/22-A02*P M83513/22-B02*P M83513/22-C02*P M83513/22-D02*P M83513/22-E02*P M83513/22-F02*P M83513/22-A03*N M83513/22-B03*N M83513/22-C03*N M83513/22-D03*N M83513/22-E03*N M83513/22-F03*N M83513/22-A03*P M83513/22-B03*P M83513/22-C03*P M83513/22-D03*P M83513/22-E03*P M83513/22-F03*P M83513/23-G01*N M83513/23-G01*P M83513/23-G02*N M83513/23-G02*P M83513/23-G03*N M83513/23-G03*P M83513/24-H01*N M83513/24-H01*P M83513/24-H02*N M83515/24-H02*P M83513/24-H03*N MICRODOT Part No. MCK-**-B-100SRT3B MCK-**-P-100SRT3B MCK-**-B- 9PST1 MCK-**-B- 15PST1 MCK-**-B- 21PST1 MCK-**-B- 25PST1 MCK-**-B- 31PST1 MCK-**-B- 37PST1 MCK-**-P- 9PST1 MCK-**-P- 15PST1 MCK-**-P- 21PST1 MCK-**-P- 25PST1 MCK-**-P- 31PST1 MCK-**-P- 37PST1 MCK-**-B- 9PST1A MCK-**-B- 15PST1A MCK-**-B- 21PST1A MCK-**-B- 25PST1A MCK-**-B- 31PST1A MCK-**-B- 37PST1A MCK-**-P- 9PST1A MCK-**-P- 15PST1A MCK-**-P- 21PST1A MCK-**-P- 25PST1A MCK-**-P- 31PST1A MCK-**-P- 37PST1A MCK-**-B- 9PST1B MCK-**-B- 15PST1B MCK-**-B- 21PST1B MCK-**-B- 25PST1B MCK-**-B- 31PST1B MCK-**-B- 37PST1B MCK-**-P- 9PST1B MCK-**-P- 15PST1B MCK-**-P- 21PST1B MCK-**-P- 25PST1B MCK-**-P- 31PST1B MCK-**-P- 37PST1B MCK-**-B- 51PST1 MCK-**-P- 51PST1 MCK-**-B- 51PST1A MCK-**-P- 51PST1A MCK-**-B- 51PST1B MCK-**-P- 51PST1B MCK-**-B-100PST1 MCK-**-P-100PST1 MCK-**-B-100PST1A MCK-**-P-100PST1A MCK-**-B-100PST1B Military Part No. M83513/24-H03*P M83513/25-A01*N M83513/25-B01*N M83513/25-C01*N M83513/25-D01*N M83513/25-E01*N M83513/25-F01*N M83513/25-A01*P M83513/25-B01*P M83513/25-C01*P M83513/25-D01*P M83513/25-E01*P M83513/25-F01*P M83513/25-A02*N M83513/25-B02*N M83513/25-C02*N M83513/25-D02*N M83513/25-E02*N M83513/25-F02*N M83513/25-A02*P M83513/25-B02*P M83513/25-C02*P M83513/25-D02*P M83513/25-E02*P M83513/25-F02*P M83513/25-A03*N M83513/25-B03*N M83513/25-C03*N M83513/25-D03*N M83513/25-E03*N M83513/25-F03*N M83513/25-A03*P M83513/25-B03*P M83513/25-C03*P M83513/25-D03*P M83513/25-E03*P M83513/25-F03*P M83513/26-G01*N M83513/26-G01*P M83513/26-G02*N M83513/26-G02*P M83513/26-G03*N M83513/26-G03*P M83513/27-H01*N M83513/27-H01*P M83513/27-H02*N M83515/27-H02*P M83513/27-H03*N M83513/27-H03*P MICRODOT Part No. MCK-**-P-100PST1B MCK-**-B- 9SST1 MCK-**-B- 15SST1 MCK-**-B- 21SST1 MCK-**-B- 25SST1 MCK-**-B- 31SST1 MCK-**-B- 37SST1 MCK-**-P- 9SST1 MCK-**-P- 15SST1 MCK-**-P- 21SST1 MCK-**-P- 25SST1 MCK-**-P- 31SST1 MCK-**-P- 37SST1 MCK-**-B- 9SST1A MCK-**-B- 15SST1A MCK-**-B- 21SST1A MCK-**-B- 25SST1A MCK-**-B- 31SST1A MCK-**-B- 37SST1A MCK-**-P- 9SST1A MCK-**-P- 15SST1A MCK-**-P- 21SST1A MCK-**-P- 25SST1A MCK-**-P- 31SST1A MCK-**-P- 37SST1A MCK-**-B- 9SST1B MCK-**-B- 15SST1B MCK-**-B- 21SST1B MCK-**-B- 25SST1B MCK-**-B- 31SST1B MCK-**-B- 37SST1B MCK-**-P- 9SST1B MCK-**-P- 15SST1B MCK-**-P- 21SST1B MCK-**-P- 25SST1B MCK-**-P- 31SST1B MCK-**-P- 37SST1B MCK-**-B- 51SST1 MCK-**-P- 51SST1 MCK-**-B- 51SST1A MCK-**-P- 51SST1A MCK-**-B- 51SST1B MCK-**-P- 51SST1B MCK-**-B-100SST1 MCK-**-P-100SST1 MCK-**-B-100SST1A MCK-**-P-100SST1A MCK-**-B-100SST1B MCK-**-P-100SST1B
1
*C = Cadmium or N = Nickel (space applications only) **C2 = Cadmium or N1 = Nickel (space applications only)
35
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Microminiature D Connectors Engineering Notes
36
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Rectangular Connectors Introduction Product Facts
I I I
Designed for both military and commercial applications Well-suited for external conditions Precise contact alignment with extremely low engaging forces Product offering consists of metal shell, plastic shell, panel mount, printed circuit board and strip connectors Metal shell connector promotes high durability and reliability
I
Rectangular Connectors
I
2
Twist Pin contact High Density Microminiature Connectors described in this catalog comprise a complete contact system which is adaptable to a numerous variety of form factors. Precise contact alignment, with extremely low engaging forces, results from the manner in which the Twist Pin contact system is packaged -- by constructing the male contact as a breathing helical spring, electrical contact is achieved at many points around the periphery of the pin bundle.
Featured in this catalog is the twist pin contact line, which accommodates round wire and Flat Conductor Cable (FCC), Edgeboard Connectors. Applications requiring frequent mating and disconnect call for the metal shell connector version. This style connector promotes high durability and reliability. Designed for both military and commercial applications, this latest innovation is especially well-suited to use in external conditions. This catalog also features light-weight plastic
connectors in a strip (MCS) format as well as JACKMATE Connectors (MCJ Series) format for small package application requiring high reliability. Edgeboard applications are covered in this catalog with a special High Density Standard Module (HDSM) Connector as well as MIL-DTL-55302 (MCEM) Connectors. The high mating forces of these larger connectors are greatly reduced with the use of the low force twist pins and sockets which are standard for this product line.
37
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Rectangular Connectors Twist Pin Contact Data Twist Pin -- 24 gauge Pin and Socket Contacts
The contact spring member normally found in socket contacts has been eliminated by creating a breathing helical spring principle on the pin contact -- smaller, more durable contacts can be manufactured economically.
Wire range 24-36 AWG solid & stranded.
38
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Rectangular Connectors MCE Series Plastic Shell Edgeboard Connectors Plastic Shell Edge Board Connectors
Designed for commercial applications requiring frequent disconnect and connect, including data recorders and computers. Mother board connector can be ordered to fit any pattern on your circuit board. This new connector features the proven twist pin contact with precision contact alignment with extremely low engaging forces. Units are available with contacts as few as 40 and as many as 110. Wire sizes 28 through 24, any type of plating or color coding, any kind of wire termination including wire wrap -- a high degree of flexibility for your military or commercial application. Two hexagonal polarizing keys can provide up to 36 different key combinations are supplied.
40 Contacts
2
Technical & Performance Data -- Twist Pin Plastic Shell Connectors
Electrical
Contact Resistance -- The average mated contact resistance is 4 milliohms, with a maximum value of 8 milliohms, using standard 24 AWG solid copper leads when measured directly behind the crimp joints of the mated pin and socket contacts. The average resistance value at 100 microvolts is 4.8 milliohms. Dielectric Withstanding Voltage -- 800 VAC RMS at sea level (600 for solder pots); 200 VAC RMS at 70,000 feet [21,336m] (150 for solder pots). Corrosion Resistance (Per MILSTD-202C, Method 101B, Condition B) -- Both mated and unmated samples do not exceed the maximum allowable contact resistance (8 milliohms) when subjected to the 48 hour salt spray test. Durability -- The contact resistance after 500 mating cycles is less than the maximum allowable, 8 milliohms. Insulation Resistance -- Greater than 5,000 megohms at room temperature. Maximum Current Carrying Capacity -- No. 24 contact 3 amperes. It must be recognized however, that all the wires to a connector will not carry their maximum current under all environmental conditions due to wire temperature.
Rectangular Connectors
Materials
Insulator -- Liquid Crystal Polymer (LCP) per ASTM D5138 or Polyphenylene Sulfide per MIL-M-24519. Contacts -- Pin-contact: Copper alloy and beryllium copper alloy make up the complete construction. Socket contact: Copper alloy. Hardware -- Corrosion resistant stainless steel.
Mechanical
Contact Engaging & Separation Forces -- 8.0 oz. max. [2.24N] (eng.), 0.5 oz. min.[.14N] (sep.)
Finishes
Insulator -- None. Contacts -- Standard finish is 0.000050 [0.00127] gold over copper flash per MIL-G-45204, Type II. Hardware -- Passivated per QQ-P-35.
Environmental
Temperature Range (Operating) -- -67F to 257F [-55 C to +125C]. Vibration (Per MIL-STD-202C, Method 204A, Condition D) -- No discontinuity in excess of 1 sec. during twelve 20 minute sweeps from 10 to 2000 CPS at .06 double amplitude or 20 G forces, whichever is less.
39
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Rectangular Connectors MCE Series Plastic Shell Edgeboard Connectors (Continued) Mother Board (Pin Side)
A B .250 [6.35] C .075 [1.91] .075 Typ. [1.91] Polarization Key Location 2 Plcs. .050 [1.27] .050 Typ. [1.27] .100 Typ. [2.54] .225 [5.72]
.150 Typ. [3.81]
Detail B
Pin Contact/ Lead Assembly
A
Insulator
.250-.300 Typ. [6.35-7.62] Epoxy
.325-.375 Typ. [8.26-9.53]
A
B4 O .091-.098 [2.31-2.49] 2 Plcs. B3 B2 B1 25 AWG Copper Wire, Gold Plated, Solder Dipped
Section A-A
B
#2-56 UNC-2B Thd.
A1 A2 A3 A4
Hex Polarizing Key 2 Supplied (Loose Packed)
Daughter Board (Socket Side)
.071-.076 [1.80-1.93] A .250 [6.35]
O.187 Thru [4.75] 2 Plcs. (Near Ear Only) B .300 [7.62] #24 AWG Copper Wire
O .093-.098 Thru .187 [2.36-2.49 Thru 4.75] (2 Plcs.) (Far ear only)
.100 Min. [2.54] Solder Dip Typ. .030 Max. [.762]
A
.250 [6.35] Max. Typ. .2 75 [6.99] 2 Plcs.
.015 .2 00 [5.08 .381] Typ.
.450 [11.43]
.180 [4.57]
Epoxy
A
.075 [1.91] Polarization Key Location 2 Plcs. B4 B3 B2 B1
Insulator Socket Contact/ Lead Assembly
.2 0 5 [6.35]
Section A-A
#2-56 UNC-2B Thd.
.050 [1.27] C
A4 A3 A2 A1
Hex Polarizing Key 2 Supplied (Loose Packed)
40
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Rectangular Connectors MCE Series Plastic Shell Edgeboard Connectors (Continued)
Dimensions for .062 [1.57] PC Board
No. of Contacts 40 44 80 110 A .010 [ .254] 1.750 44.45 1.850 46.99 2.750 69.85 3.500 88.90 B .005 [ .127] 1.500 38.10 1.600 40.64 2.500 63.50 3.250 82.55 C Basic .950 24.13 1.050 26.67 1.950 49.53 2.700 68.58
Notes: For PC Boards of different widths, consult Tyco Electronics.
2
How To Specify
S -- Solder pots 26 AWG max. Z -- Wire layout as shown on page 40. X -- Special, does not fit description below. MCE Connector Series Material
R1 -- Liquid Crystal Polymer or Polyphenylene Sulfide
Rectangular Connectors
R1
40
P
6
L
4
0.5 Lead Length in Inches (min.) Insulation Color or Finish
1 -- All white wire 2 -- All yellow wire 3 -- All gray wire 4 -- Gold plated 5 -- Tin dipped gold plated 6 -- Bare (unfinished) 7 -- Color coded per MIL-STD-681, System 1 8 -- Special color code 9 -- Ten solid color repeating (starts with black) G -- 19 strand per MIL-22759/11 26 AWG, 24 AWG L -- Copper, solid Q -- Stranded per MIL-W-22759/33
Layout
40, 44, 80, 110
Wire Type
*A -- Type E, 7 strand *D -- Type ET, 19 strand *B -- Type ET, 7 strand F -- 7 strand per MIL-22759/11 *C -- Type E, 19 strand (#28 AWG only) *Per MIL-W-16878
Contact Type
P -- Pin (Mother Board Connector) S -- Socket (Daughter Board Connector)
Wire Size
4-24 AWG 5-25 AWG 6-26AWG 8-28 AWG 0-30 AWG
Mounting -- Holes on the Daughter Board side can be modified.
41
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Rectangular Connectors MCEM Series Metal Shell Edgeboard Connectors Metal Shell Edge Board Connectors
I I
Meets MIL-DTL-55302 performance requirements Layouts 128 and 184 are QPL to slash sheets 120, 121, 122 and 123 Connectors are available in 40, 44, 80, 110, 128, 152, and 184 positions Utilizes low force twist pins and our low force sockets. Mating forces in the 3 to 4 oz. [.83 to 1.11N] range per contact are typical with low force pin and low force socket Designed for surface mounting and through-theboard mounting Available termination I Mother board (pin side) -- cactus bend I Daughter board (socket side) -- coke bottle, right-angle bend to "A" or "B" side I Solder pots, and variety of other wire terminations for pin and socket connectors available at customer's request Two hexagonal polarizing keys (per MIL-DTL-55302 slash sheet 124) are provided. Jackscrew hardware is available. For programmable keying/ jacking modifications consult Tyco Electronics
I
I
I
I
I
In addition to the plastic versions of the 2 piece edgeboard connectors, a metal shell assembly is designed and tooled. The metal shells are made of aluminum alloy per QQ-A591. The insert material is Diallyl phthalate, Polyphenylene sulfide (Ryton) or Liquid Crystal Polymer (LCP). The techni-
cal and performance data is essentially the same as that shown for the MCDM Series on page 25. These are rugged, durable connectors and are ideal for use in areas of high density packaging and where frequent connect and disconnects are required. Designed initially for applications in airborne data recorders,
computers and associated equipment in navigational systems. The mother board connector can be ordered to fit any pattern on the circuit board. The units can also be provided with contacts on .100 [2.54] spacing which results in .100 [2.54] grid pattern.
Performance Data
Electrical
Contact Resistance -- The average mated contact resistance is 4 milliohms, with a maximum value of 8 milliohms. The average resistance value at 100 microvolts is 4.8 milliohms. Dielectric Withstanding Voltage -- 800 VAC RMS at sea level (600 for solder pots); 200 VAC RMS at 70,000 feet [21,336m] (150 for solder pots). Durability -- Less than the maximum allowable, 8 milliohms after 500 mating cycles. Insulation Resistance -- Greater than 5,000 megohms at room ambient temperature. Maximum Current Carrying Capacity -- No. 24 contact 3 amperes.
Mechanical
Contact Engaging & Separation Forces -- 5.0 oz. max. [1.39N] (eng.), 0.5 oz. min. [.14N] (sep.).
Materials and Finish
Shells -- High grade aluminum alloy, electroless nickel plated per AMS 2404. Insulator -- Diallyl Phthalate per MILM-14, Type SDG-F (for 128 & 184); Polyphenylene Sulfide per MIL-M24519 (for 40, 44, 80, 110 & 152), or Liquid Crystal Polymer per ASTM D5138. Contacts -- Pin (low force): beryllium and OFHC copper, gold plated. Socket (low force): Copper alloy, gold plated. Hardware -- Corrosion resistant stainless steel passivated.
Environmental
Temperature Range -- -67F to 302F [-55 C to +150C] for Diallyl Phthalate; -67F to 257F [-55 C to +125C] for Polyphenylene Sulfide. Vibration -- No discontinuity in excess of 1 sec. during twelve 20 minute sweeps from 10 to 2000 CPS at .06 double amplitude or 20 G forces, whichever is less.
42
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Rectangular Connectors MCEM Series Metal Shell Edgeboard Connectors (Continued) Mother Board (Pin Side)
40, 44, 80, 110 & 128 Positions
A B .050 Typ. [1.27] .250 [6.35]
Rectangular Connectors
#2-56 UNC-2B Thd.
Hex Polarizing Key 2 Supplied (Loose Packed)
.050 [1.27] Polarizing Key Location 2 Plcs.
Pin Contact/Lead Assy. Insulator Assy.
.400 [10.16]
A
Epoxy
2
.260-.300 Typ. [6.60-7.62] .325-.375 Typ. [8.26-9.53]
A
O .091-.098 Thru [2.31-2.49] 2 Plcs.
25 AWG Copper Wire, Gold Plated, Solder Dipped B3 B4 B2 B1
.075 Typ. [1.91] .075 Typ. [1.91]
.050 Typ. [1.27]
.100 Typ. [2.54]
A4 A3
A1 A2
Section A-A
Dimensions for .062 [1.57] PC Board
No. of Contacts 40 44 80 110 128 A .010 [ .254] 1.750 44.45 1.850 46.99 2.750 69.85 3.500 88.90 3.950 100.33 B .005 [ .127] 1.500 38.10 1.600 40.64 2.500 63.50 3.250 82.55 3.700 93.98
Note: For PC Boards of different widths, consult Tyco Electronics.
Items in bold italic are qualified to MIL-DTL-55302. Configuration shown is per MIL-DTL-55302/120.
43
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Rectangular Connectors MCEM Series Metal Shell Edgeboard Connectors (Continued) Daughter Board (Socket Side)
40, 44, 80, 110 & 128 Positions
.071-.076 [1.80-1.93] 2 Plcs.
A
B
O .091-.098 Thru Hole [2.31-2.49] 2 Plcs. C'Bore O .187 [4.75] x .045 [1.14] Deep (A Side Only) .250 [6.35] O .187 Thru 1 Wall [4.75]
.125 2 Plcs. [3.18]
B
.060 3 Plcs. [1.52]
Section B-B
24 AWG Copper Wire, Gold Plated .030 Max. [0.76] .150 Min. [3.81] Solder Dip Typ.
B .275 [6.99] .050 Typ. [1.27]
.250 Max. [6.35] .200 .015 [5.08 .381]
.071 Min. [1.80] at B
.330 [8.38] 2 Plcs.
.180 [4.57] 2 Plcs.
A
Epoxy Insulator Assy.
Skt. Contact/ Lead Assy. .250 2 Plcs. [6.35] .050 [1.27] Retaining Pin Holes 4 Plcs. .050 Typ. [1.27]
A
B2 B1
Section A-A
Polarizing Key Location 2 Plcs.
A1 A2
Note: Board thickness .070 [1.78] Max.
Polarizing Key 2 Supplied (Loose Packed)
Retaining Pin 4 Supplied (Loose Packed)
How To Specify
S -- Solder pots for 26 AWG max. Z -- Wire layout as illustrated. X -- Special, does not fit description below. MCE M1 128 L 6 L 4 0.5 Lead Length in Inches (min.) Insulation Color or Finish
1 -- All white wire 2 -- All yellow wire 3 -- All gray wire 4 -- Gold plated 7 -- Color coded per 5 -- Tin dipped gold plated MIL-STD-681, System 1 6 -- Bare (unfinished) 8 -- Special color code 9 -- Ten solid color repeating (starts with black) G -- 19 strand per MIL-C-22759/11 26 AWG, 24 AWG L -- Copper, solid Q -- Stranded per MIL-W-22759/33
Connector Series Material
M1 -- Metal Shell
Layout
40, 44, 80, 110, 128, 152, 184
Contact Type
L -- Low Force Pin (Mother Board Connector) SL -- Low Force Socket* (Daughter Board Connector)
Wire Type
*A -- Type E, 7 strand *B -- Type ET, 7 strand *C -- Type E, 19 strand *Per MIL-W-16878 *D -- Type ET, 19 strand F -- 7 strand per MIL-C-22759/11 (#28 AWG only)
Wire Size
4-24 AWG 5-25 AWG 6-26 AWG 8-28 AWG 0-30 AWG
Items in bold italic are qualified to MIL-DTL-55302. Configuration shown is per MIL-DTL-55302/121.
Polarization - Hexagonal hardware is supplied with connector. Mounting -- Standard mounting holes are shown. Consult Tyco Electronics for modifications.
44
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Rectangular Connectors MCEM Series Metal Shell Edgeboard Connectors (Continued) Mother Board (Pin Side)
152 & 184 Positions
A B B/2
A B
Polarizing Key Location 2 Plcs.
#2-56 UNC-2B Thd.
.075 [1.91]
.343 [8.71]
.500 [1.27] C
D 2 Plcs
.050 Typ. [1.27] .270 [6.86]
Hex Polarizing Key 2 Supplied (Loose Packed)
Pin Contact/ Lead Assembly
.400 [10.16]
A
Rectangular Connectors
Insulator Subassembly 25 AWG Copper Wire, Gold Plated, Solder Dipped
Retaining Pin Hole 4 Plcs.
A
B3 B4 B2 B1
B1 B2 .075 Typ. [1.91]
.250-.300 Typ. [6.35-7.62] .325-.375 Typ. A1 [8.26-9.53] A2 .075 [1.91] Typ.
.250 [6.35]
A4 A3
A1 A2
Section A-A
2
Daughter Board (Socket Side)
152 & 184 Positions
.343 [8.71] A O .091-.098 [2.31-2.49] Thru C'Bore O .187 [4.75] x .045 [1.14], 3 Plcs., (A Side Only) .125 2 Plcs. [3.18] .060 [1.52] 3 Plcs. O .187 Thru [4.75] 3 Plcs. (B Side Only)
B B
B C D .500 [12.70] B/2 2 Plcs.
.071 Min. [1.80]
Section B-B
24 AWG Copper Wire, Gold Plated .200 Typ. [5.08]
.250 2 Plcs. [6.35] .700 [17.78]
.030 Max. [.762] .250 Max. [6.35] Typ. .053 [1.35] Min. at B Insulator Assy.
A
.242 [6.15] .075 [1.91] Typ.
Retaining Pin Hole 4 Plcs. Polarizing Key Locations 2 Plcs.
A
B3 B4 B2 B1
.150 Min. [3.81] Typ. Solder Dip Epoxy Skt. Contact/ Lead Assy.
Section A-A
.050 Typ. [1.27]
A4 A3
A1 A2
Retaining Pin 4 Supplied Polarizing Key (Loose Packed) 2 Supplied (Loose Packed)
No. of Contacts 152 184
A .010 [ .254] 4.550 115.57 5.800 147.32
B .005 [ .127] 4.300 109.22 5.550 140.97
C Basic 4.750 120.65 5.000 127.00
D Basic 1.850 46.99 2.250 57.15
45
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Rectangular Connectors JACKMATE MCJ(M) Series Plastic (Metal) Shell Center Jackscrew Connectors
JACKMATE Connectors are the first Twist Pin contact assemblies designed to accommodate center jackscrews that provide jacking action when mating or unmating the connectors. Although the units were initially developed for high density cord-to-cord or in-line applications, either plug or receptacle can be
adapted to a PC board. The jacking hardware consist of a threaded bushing and a captivated jackscrew which are made of corrosion resistant stainless steel and are molded into the JACKMATE Connector Insulator. The twist pin contacts are on .050 [1.27] center-to-
center linear spacing and contact terminations are available in solid wire or stranded wire. There is a high degree of flexibility with this JACKMATE connector design for commercial or military applications. Available om MCJ(M) Series Plastic (Metal) Shells.
JACKMATE MCJ Series Plastic Shell Center Jackscrew Connectors JACKMATE Technical & Performance Data for Plastic Shell
Electrical
Contact Resistance -- The average mated contact resistance is 4 milliohms, with a maximum value of 8 milliohms, using standard 24 AWG solid copper leads when measured directly behind the crimp joints of the mated pin and socket contacts. The average resistance value at 100 microvolts is 4.8 milliohms. Dielectric Withstanding Voltage (60 Hz rms room temperature) -- Solder Pots: 600 VAC at sea level; 150 VAC at 70,000 feet [21,336m] Wire Terminations: 750 VAC at sea level; 200 VAC at 70,000 feet [21,336m]. Corrosion Resistance (Per MIL-STD202C, Method 101B, Condition B) -- Both mated and unmated samples do not exceed the maximum allowable contact resistance (8 milliohms) when subjected to the 48 hour salt spray test. Durability -- The contact resistance after 500 mating cycles is less than the maximum allowable, 8 milliohms. Insulation Resistance -- Greater than 5,000 megohms at room temperature for the materials listed under "Materials". Maximum Current Carrying Capacity -- No. 24 contact 3 amperes. It must be recognized, however, that all the wires to a connector will not carry their maximum current under all environmental conditions due to wire temperature.
Mechanical
Contact Engaging & Separation Forces -- 8.0 oz. max. [2.22N] (eng.), 0.5 oz. min. [.14N] (sep.).
Materials
Insulator -- Glass filled Nylon Type 6. Contacts -- Pin contact: copper alloy and beryllium copper alloy make up the complete construction; Socket contact: copper alloy. Hardware -- Corrosive resistant stainless steel.
Environmental
Temperature Range (Operating) -- -67F to 257F [-55 C to 125C]. Vibration (Per MIL-STD-202C, Method 204-A, Condition D) -- No discontinuity in excess of 1 sec. during twelve 20 minute sweeps from 10 to 2000 CPS at .06 double amplitude or 20 G forces, whichever is less.
Finishes
Contacts -- Standard finish is 0.000050 [0.00127] gold over copper flash per MIL-G-45204, Type II. Hardware -- Passivated Per QQ-P-35.
10 & 14 Contact Layout
.165 [4.19] .075 [1.91]
.165 [4.19] .075 [1.91] .050 Typ. [1.27]
.120 [3.05]
.285 [7.24] .570 [14.00] .050 Typ. [1.27] 30
Guide Pin 2 Plcs.
.300 [7.62]
.235 [5.97] .470 [11.94]
Bushing
Jackscrew (.050 hex wrench req'd to turn screw)
30
14 Layout
10 Layout
Receptacle
Plug
46
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Rectangular Connectors JACKMATE MCJ Series Plastic Shell Center Jackscrew Connectors (Continued) 26, 38 & 46 Contact Layout
.165 [4.19] .075 [1.91]
.165 [4.19]
.300 [7.62]
.165 [4.19]
.120 [3.05] Jackscrew #0-80 UNF-2A Thd.
.635 [16.13] 1.270 [32.26]
.050 [1.27] Typ.
A
A
.585 [14.86] 1.170 [29.72]
.438 [11.13] .870 [22.10]
Guide Pin
Bushing #0-80 UNF-2B Thd.
Rectangular Connectors
42 Layout
38 Layout
.285 [7.24] .050 Typ. [1.27] .050 Typ. [1.27]
26 Layout
Receptacle
Section A-A Plug
.120 [3.05]
.300 [7.62]
.610 [15.49] .305 [7.75]
Bushing #0-80 UNF-2B Thd. Guide Pin
Jackscrew #0-80 UNF-2A Thd.
46 Layout
Receptacle
Plug
2
How To Specify
MCJ Connector Series Shell Material
B2 Glass filled nylon, type 6/10, blue
S Solder pot for 26 AWG maximum stranded wire. X Special, does not fit description below. B2 10 P 4 L 4 0.5 Lead Length in Inches (min.) Insulation Color or Finish
1 All white wire 2 All yellow wire 3 All gray wire 4 Gold plated 5 Tin dipped gold plated 6 Bare (unfinished) 7 Color coded per MIL-STD-681, System 1 8 Special color code 9 Ten solid color repeating (starts with black) G 19 strand per MIL-C-22759/11 26 AWG, 24 AWG L Copper, solid Q Stranded per MIL-W-22759/33
Layout (Positions)
10, 14, 26, 38, 42, 46
Wire Type Contact Type
P Pin S Socket *A Type E, 7 strand *B Type ET, 7 strand *C Type E, 19 strand *Per MIL-W-16878 *D Type ET, 19 strand F 7 strand per MIL-C-22759/11 (#28 AWG only)
Wire Size
4--24 AWG 5--25 AWG 6--26 AWG 8--28 AWG 0--30 AWG
Contact Arrangement as Viewed from the Engaging Face of the Pin Side
38 21 26 15 10 7
20
1
Guide Pin
Guide Pin
14
Guide Pin Guide Pin
1
6
1
Guide Pin
Guide Pin
38 Positions
46 27 11 36 20 1 7 14 1 6
26 Positions
1
10 Positions
20
21
Guide Pin
Guide Pin
Guide Pin
42
46 Positions
14 Positions
42 Positions
Guide pin locations illustrated are for standards configuration only. Any location is available. Guide pins are supplied in socket connectors and blank cavities are in pin connector.
47
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Rectangular Connectors JACKMATE MCJM Series Metal Shell Center Jackscrew Connectors Technical and Performance Data for Metal Shell
Electrical
Contact Resistance -- The average mated contact resistance is 4 milliohms, with a maximum value of 8 milliohms, using standard 24 AWG solid copper leads when measured directly behind the crimp joints of the mated pin and socket contacts. The average resistance value at 100 microvolts is 4.8 milliohms. Dielectric Withstanding Voltage (60 Hz rms room temperature) -- Solder Pots: 600 VAC at sea level; 150 VAC at 70,000 feet [21,336m]. Wire Terminations: 750 VAC at sea level; 200 VAC at 70,000 feet [21,336m]. Corrosion Resistance (Per MILSTD-202C, Method 101B, Condition B) -- Both mated and unmated samples do not exceed the maximum allowable contact resistance (8 milliohms) when subjected to the 48 hour salt spray test. Durability -- The contact resistance after 500 mating cycles is less than the maximum allowable, 8 milliohms. Insulation Resistance -- Greater than 5,000 megohms at room temperature for the materials listed under "Materials". Maximum Current Carrying Capacity -- No. 24 contact 3 amperes. It must be recognized, however, that all the wires to a connector will not carry their maximum current under all environmental conditions due to wire temperature.
Materials
Insulator -- Diallyl Phthalate per MILM-14, Type SDG-F. Contacts -- Pin contact: copper alloy and beryllium copper alloy make up the complete construction; Socket contact: copper alloy. Body Shells -- Pin body shell: stainless steel, Types 304, Condition A per QQ-S-766; Socket body shell: aluminum alloy per QQ-A-591, A-380 alloy. Hardware -- Corrosion resistant stainless steel.
Mechanical
Contact Engaging & Separation Forces -- 8.0 oz. max. [2.22N] (eng.), 0.5 oz. min.[.14N] (sep.).
Finishes
Contacts -- Standard finish is 0.000050 [0.00127] gold over copper flash per MIL-G-45204, Type II. Body Shells -- Pin body shell: passivated per MIL-F-14072 (E-300); Socket body shell: electroless nickel per AMS 204, Class 3, except thickness is 0.001/0.0015 [0.025/0.038]. Hardware -- Passivated per QQ-P-35.
Note: Insulators are molded into their metal shells -- No bonded joint is used. *Standard material used unless otherwise specified.
Environmental
Temperature Range (Operating) -- -67F to 302F [-55C to 150C] for Diallyl Phthalate. Vibration (Per MIL-STD-202C, Method 204-A, Condition D) -- No discontinuity in excess of 1 sec. during twelve 20 minute sweeps from 10 to 2000 CPS at .06 double amplitude or 20 G forces, whichever is less.
Plug (Pin Side)
Shell Type M1
A Polarization
B Polarization
Jackscrew 2-56 UNC-2B Thd.
.199 .300 [5.05] [7.62]
Contact Pin Shell Insert
.180 [4.57]
.187 [4.75]
.046 Rad. [1.17] Typ.
#10
.078 Hex [1.98] Socket
#1
.350 [8.89]
.125 Rad. [3.18] Typ.
#48 .830 [21.08] Jackscrew
#41
48
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Rectangular Connectors JACKMATE MCJM Series Metal Shell Center Jackscrew Connectors (Continued) Receptacle (Socket Side)
Shell Type M1
.830 [21.08] .125 Sq. [3.18] .050 BSC [1.27] Typ. A Polarization Bushing #41 #48 .125 Rad. [3.18] 2 Plcs. .050 2 Plcs. [1.27] .010 .355 + .005 - 0.25 [9.02]+ 0.13 -
#41 #48
Shell Type M2
.050 BSC [1.27] Typ.
Rectangular Connectors
.030 Rad. [0.76] 4 Plcs. #1 .046 Rad. [1.17] 2 Plcs. #10 B Polarization
.160 .005 2 Plcs. [4.06 0.13]
#1
#10
Bushing Stainless Steel 2-56 UNC-2B Thd. .094 Rad. [2.39] 2 Plcs.
Interfacial Seal Silicon Rubber Full Rad. Typ. .094 .005 2 Plcs. [2.39 0.13] .310 [7.87]
2
.070 .005 [1.78 0.13] 2 Plcs.
.108 .005 2 Plcs. [2.74 0.13] .200 .005 [5.08 0.13] 2 Plcs. Insert Contact Skt.
How To Specify
S Solder pot for 26 AWG maximum stranded wire. X Special, does not fit description below. MCJ JACKMATE Connector Series Shell Material
M1 Metal Shell (Standard) M2 Metal Shell (Special receptacles only)
M1
A
48
P
4
L
4
0.5 Lead Length in Inches (min.) Insulation Color or Finish
1 All white wire 2 All yellow wire 3 All gray wire 4 Gold plated 5 Tin dipped gold plated 6 Bare (unfinished) 7 Color coded per MIL-STD-681, System 1 8 Special color code 9 Ten solid color repeating (starts with black)
Polarizing Position
A, B
Wire Type
*A Type E, 7 strand *B Type ET, 7 strand *C Type E, 19 strand *Per MIL-W-16878 *D Type ET, 19 strand F 7 strand per MIL-C-22759/11 (#28 AWG only) G 19 strand per MIL-C-22759/11 26 AWG, 24 AWG L Copper, solid Q Stranded per MIL-W-22759/33
Layout (Positions)
48
Contact Type
P Pin S Socket
Wire Size
4--24 AWG 5--25 AWG 6--26 AWG 8--28 AWG 0--30 AWG
49
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Rectangular Connectors MCS Series Strip Connectors Strip Connectors MCS Plastic Strip
C Lead Epoxy Insulator Pin Contact .070 [1.78]
.070 [1.78]
A
.050 Typ. [1.27] .283 [7.19]
C Skt. Contact Insulator Epoxy
B
.050 Typ. [1.27] .100 [2.54]
A
Plug
Section A-A
.035 Max. [.889] For Solid Wire .125 Max. [3.18] For Insulated Wire
Lead
Section B-B
B
Receptacle
.035 Max. [.889] For Solid Wire .125 Max. [3.18]
For Insulated Wire
Part No. By Size MCSAR*-1** MCSAR*-2** MCSAR*-3** MCSAR*-4** MCSAR*-5** MCSAR*-6** MCSAR*-7** MCSAR*-8** MCSAR*-9** MCSAR*-10** MCSAR*-11** MCSAR*-12** MCSAR*-13** MCSAR*-14** MCSAR*-15** MCSAR*-16** MCSAR*-17** MCSAR*-18** MCSAR*-19** MCSAR*-20** MCSAR*-21** MCSAR*-22** MCSAR*-23** MCSAR*-24** MCSAR*-25** MCSAR*-26** MCSAR*-27** MCSAR*-28** MCSAR*-29** MCSAR*-30**
C Max. .070 [1.78] .120 [3.05] .170 [4.32] .220 [5.59] .270 [6.86] .320 [8.13] .420 [10.67] .420 [10.67] .470 [11.94] .520 [13.21] .570 [14.48] .620 [15.75] .670 [17.02] .720 [18.29] .770 [19.56] .820 [20.83] .870 [22.10] .920 [23.37] .970 [24.64] 1.020 [25.91] 1.070 [27.18] 1.120 [28.45] 1.170 [29.72] 1.220 [30.99] 1.270 [32.26] 1.320 [33.53] 1.370 [34.80] 1.420 [36.07] 1.470 [37.34] 1.520 [38.61]
Part No. By Size MCSAR*-31** MCSAR*-32** MCSAR*-33** MCSAR*-34** MCSAR*-35** MCSAR*-36** MCSAR*-37** MCSAR*-38** MCSAR*-39** MCSAR*-40** MCSAR*-41** MCSAR*-42** MCSAR*-43** MCSAR*-44** MCSAR*-45** MCSAR*-46** MCSAR*-47** MCSAR*-48** MCSAR*-49** MCSAR*-50** MCSAR*-51** MCSAR*-52** MCSAR*-53** MCSAR*-54** MCSAR*-55** MCSAR*-56** MCSAR*-57** MCSAR*-58** MCSAR*-59** MCSAR*-60**
C Max. 1.570 [39.88] 1.620 [41.15] 1.670 [42.42] 1.720 [43.69] 1.770 [44.96] 1.820 [46.23] 1.870 [47.50] 1.920 [48.77] 1.970 [50.04] 2.020 [51.31] 2.070 [52.58] 2.120 [53.85] 2.170 [55.12] 2.220 [56.39] 2.270 [57.66] 2.320 [58.93] 2.370 [60.20] 2.420 [61.47] 2.470 [62.74] 2.520 [64.01] 2.570 [65.28] 2.620 [66.55] 2.670 [67.82] 2.720 [69.09] 2.770 [70.36] 2.820 [71.63] 2.870 [72.90] 2.920 [74.17] 2.970 [75.44] 3.020 [76.71]
Part No. By Size MCSAR*-61** MCSAR*-62** MCSAR*-63** MCSAR*-64** MCSAR*-65** MCSAR*-66** MCSAR*-67** MCSAR*-68** MCSAR*-69** MCSAR*-70** MCSAR*-71** MCSAR*-72** MCSAR*-73** MCSAR*-74** MCSAR*-75** MCSAR*-76** MCSAR*-77** MCSAR*-78** MCSAR*-79** MCSAR*-80** MCSAR*-81** MCSAR*-82** MCSAR*-83** MCSAR*-84** MCSAR*-85** MCSAR*-86** MCSAR*-87** MCSAR*-88** MCSAR*-89** MCSAR*-90**
C Max. 3.070 [77.98] 3.120 [79.25] 3.170 [80.52] 3.220 [81.79] 3.270 [83.06] 3.320 [84.33] 3.370 [85.60] 3.420 [86.87] 3.470 [88.14] 3.520 [89.41] 3.570 [90.68] 3.620 [91.95] 3.670 [93.22] 3.720 [94.49] 3.770 [95.76] 3.820 [97.03] 3.870 [98.30] 3.920 [99.57] 3.970 [100.84] 4.020 [102.11] 4.070 [103.38] 4.120 [104.65] 4.170 [105.92] 4.220 [107.19] 4.270 [108.46] 4.320 [109.73] 4.370 [111.00] 4.420 [112.27] 4.470 [113.54] 4.520 [114.81]
Part No. By Size MCSAR*-91** MCSAR*-92** MCSAR*-93** MCSAR*-94** MCSAR*-95** MCSAR*-96* MCSAR*-97** MCSAR*-98** MCSAR*-99** MCSAR*-100** MCSAR*-101** MCSAR*-102** MCSAR*-103** MCSAR*-104** MCSAR*-105** MCSAR*-106** MCSAR*-107** MCSAR*-108** MCSAR*-109** MCSAR*-110** MCSAR*-111** MCSAR*-112** MCSAR*-113** MCSAR*-114** MCSAR*-115** MCSAR*-116** MCSAR*-117** MCSAR*-118** MCSAR*-119** MCSAR*-120**
C Max. 4.570 [116.08] 4.620 [117.35] 4.670 [118.62] 4.720 [119.89] 4.770 [121.16] 4.820 [122.43] 4.870 [123.70] 4.920 [124.97] 4.970 [126.24] 5.020 [127.51] 5.070 [128.78] 5.120 [130.05] 5.170 [131.32] 5.220 [132.59] 5.270 [133.86] 5.320 [135.13] 5.370 [136.40] 5.420 [137.67] 5.470 [138.94] 5.520 [140.21] 5.570 [141.48] 5.620 [142.75] 5.670 [144.02] 5.720 [145.29] 5.770 [146.56] 5.820 [147.83] 5.870 [149.10] 5.920 [150.37] 5.970 [151.64] 6.020 [152.91]
How To Specify
MCS Connector Series Insulator Type and Material
AR -- Polyphenylene Sulfide per MIL-M-24519 or Liquid Crystal Polymer per ASTM D5138
S -- Solder pot for 26 AWG maximum stranded wire. X -- Special, does not fit description below. AR 2 26 P 6 A 1 18.0 Lead Length in Inches (min.) Insulation Color or Finish
1 -- All white wire 2 -- All yellow wire 3 -- All gray wire 4 -- Gold plated 5 -- Tinned 6 -- Bare (unfinished) 7 -- Color coded per MIL-STD-681, System 1 8 -- Special color code 9 -- Ten solid color repeating (starts with black) G -- 19 strand per MIL-22759/11 26 AWG, 24 AWG M -- Copper, solid Q -- Stranded per MIL-W-22759/33
Contact Locations
1 -- Contact in every cavity 2 -- Contact in every other cavity 1, 3, 5... 3 -- Contact in every cavity except guide pin cavity in each end cavity 4 -- Contact in every other cavity 2, 4, 6... and guide pin in each end cavity X -- Other than above Standard Polarization Guide pins are in socket connectors. Blank cavities are in pin connectors.
Wire Type
*A -- Type E, 7 strand *B -- Type ET, 7 strand *C -- Type E, 19 strand *Per MIL-W-16878 *D -- Type ET, 19 strand F -- 7 strand per MIL-22759/11 (#28 AWG only)
Number of Cavities (120 Max.) Contact Type
P -- Pin S -- Socket
Wire Size
4-24 AWG 5-25 AWG 6-26 AWG 8-28 AWG 0-30 AWG
50
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Rectangular Connectors High Density Standard Module (HDSM) Connectors Features
I
Designed for surface mounting on both daughter board and mother board for increased circuit density Basic design offers 38, 78, 120, 152, 200, 304, and 400 contact designs High reliability twist pin and socket per MIL-DTL-83513 and MIL-DTL-55302 Connector permits lateral movement of daughter board to accommodate clamping of the heatsink Plated through-hole mounting available Available with flying leads Extender card option available Typical mating force for 304 contacts is 38 pounds Designed to withstand vapor phase soldering Two rotatable (six position) polarizing keys are provided accommodating 36 possible combinations Jackscrew hardware available; consult Tyco Electronics Different modular inserts may be specified to include coax (Pixi/Con), fiber optic or other special contacts Inserts may be partially or fully loaded and installed in the connector shell in various configurations The MICRODOT HDSM connector is designed for 4 row .050 [1.27] pitch density with a special low force twist pin that meets all requirements of MILDTL-55302 and MIL-DTL83513. This high density connector allows the use of construction to double the packaging density with surface mount capability.
I
I
I
Rectangular Connectors
I I I I I I
2
I
I
Performance Data Summary
Electrical
Contacts -- Pin 24 AWG twist pin, Socket #24 AWG, Wire range 24 AWG to 32 AWG solid and stranded. Contact Resistance (voltage drop) -- 25 millivolts max. at 3 amps, 25 3 C. Current Rating -- 3 amps max. per contact Dielectric Withstanding Voltage -- Volts RMS 60 Hz at room ambient: 600 V for solder pots at sea level. 150 V for solder pots at 70,000 ft. [21,336m] 500 V for wire terminations at sea level. 200 V for wire terminations at 70,000 ft. Insulation Resistance -- 5,000 megohms min. at room ambient. Magnetic Permeability -- 2 m max.
Materials and Finishes
Contacts -- Copper alloy plated with .000050 [0.00127] gold over copper flash per MIL-G-45204, Type II. Metal Shell -- Insulator -- Liquid Crystal Polymer (LCP) per ASTM D5138 or Polyphenylene Sulfide per MIL-M-24519 Body Shell -- Aluminum alloy plated Nickel, electroless per MIL-C-26074.
I
Environmental
Temperature Range -- -67F to 257F [-55 C to +125 C]. Vibration -- No discontinuity in excess of 1 micro sec. when tested in accordance with MIL-STD-1344, Method 2005, test Condition IV. Insulator Retention -- Inserts will withstand a 50 lb. per square inch load in either direction. Shock -- No discontinuity in excess of 1 micro sec. when tested in accordance with MIL-STD-1344, Method 2004, test Condition E.
Mechanical
Contact Spacing -- .050 [1.27] centers Contact Engagement & Separation -- 5.0 oz max. [1.39N] (eng.) 0.5 oz. min. [.14N] 3.5 oz. typ. [.97N] (sep.) force.
Durability -- No mechanical or electrical defects detrimental to the function of the connectors after 500 cycles of mating and unmating. (Caution: Mating force increases during durability cycling may be noted). Humidity -- After exposure to humidity as specified by MIL-STD-1344, Method 1002, Type II, IR shall be 1 megohm min. immediately following step 7a of Method 1002 and 1000 megohms min. after 24 hours of conditioning per Method 1002. Salt Spray -- Connectors shall meet the performance requirements of contact resistance, mating and unmating forces, and contact retention after being subjected to the 48-hour 5% solution salt spray test per MIL-STD-1344, Method 1001, Condition B. Crimp Termination Tensile Strength -- *Unassembled contacts with crimped stranded wire terminations. Wires will not pull out of contacts when the following axial loads are applied: 24 AWG, 5 lbs., 26 AWG, 4 lbs., 28 AWG, 3 lbs.
51
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Rectangular Connectors High Density Standard Module (HDSM) Connectors (Continued)
A B .050 Typ. [1.27]
A B
.025 Typ. [0.64] .050 Typ. [1.27]
.050 [1.27] .150 [3.81] .360 [9.14]
38 & 78 Position Plug
Socket Side Flat Screw 2-56 UNC-2A Thd. Receptacle Polarizing Key 2-56 UNC-2B Thd. Plug Polarizing Key 2-56 UNC-2B Thd. Pin Side A30 (38) (50) B30 (38) (50) .025 A1 [0.64] B1
120, 152 & 200 Position Plug
Mtg. Nut/Polarizing Key (Customer Installed) 2 Supplied (Packed Loose) A
End Cav. A1 Near Side Marked As Shown End Cav. D1 Far Side Insulator Pin Contact .505 [12.83] .290 Ref. [7.37] Housing
}
A
A1
.290 [7.34] .165 [4.19]
Flat Screw 2-56 UNC-2A Thd.
.350 Min. [8.89] Ref.
.350 Min. [8.89]
Lead Organizer
Keying Hardware
A9 (19) B10 (20)
C Ref. A15 (19) (25) A16 (20) (26) B16 (20) (26) B15 (19) (25) D .050 .050 [.127] [.127]
A A1 B1
2-56 UNC-2B Thd. x .125 [3.17] DP
28 AWG Wire Solder Dipped O.010 [0.25] (All Leads)
.200 [5.08]
Section A-A
.300 .490 Max. [7.62] [12.50] C10 (20) D9 (19) C1 C30 (38) (50) D1 D30 (38) (50) C16 (20) (26) D16 (20) (26) C C15 (19) (25) D15 (19) (25) C1 D1
C
(38 & 78)
A B .050 [1.27] 2 Plcs.
D C B A
(120, 152 & 200)
.050 [1.27] .150 [3.81] .360 [9.14] 'A1' Near Side Marking 'D1' Far Side Marking .290 .290 [7.34] Ref. [7.37] A1 .505 [12.83] .165 [4.19] Lead Organizer .060 Thick [1.52] .062 [1.58] .350 [8.89] Min. Pin Contact Insulator Housing
.025 Typ. [0.64] .050 Typ. [1.27]
.250 [6.35]
Mtg. Nut/Polarizing Key 304 & 400 Position Plug (Customer To Install) 2 Supplied (Packed Loose) 'A76' (304) 'A100' (400) Near Side Marking 'D76' (304) 'D100' (400) Far Side Marking
A
A***
.050 Ref. [1.27] C (2 Plcs.)
D Ref. .125 Ref. [3.18]
C L
Standoff, 2-56 UNC-2B Thd. x .125 [3.17] Min. Thd. .250 [6.35] B38(50) A38(50) B37(49) A37(49) A20(26) B20(26) A21(27) B21(27) A19(25) B19(25) A18(24) B18(24)
A
2-56 UNC-2B Thd. x .125 [3.17] DP 28 AWG Wire Solder Dipped fl.010 [0.25] (All Leads) A2 B2 A1 B1
Section A-A
D75(99) C75(99) D76(100) B76(100)
A58(76) B58(76) A59(77) B59(77)
A57(75) B57(75) A56(74) B56(74)
B39(51) A39(51) B40(52) A40(52)
B3 A3 B4 A4
.220 [5.59]
.590 .340 .460 Max. [8.64] [11.68] [14.99]
C76(100) D76(100) C75(99) D75(99) .050 Typ. [1.27] .100 Typ. [2.54]
C59(77) D59(77) C58(76) D58(76) .025 Typ. [0.64] .075 Typ. [1.91]
C56(74) D40(52) D56(74) C40(52) C57(75) D39(51) D57(75) C39(51) D Typ. .050 2 Plcs. [1.27]
D37(49) C37(49) D38(50) C38(50)
C21(27) D21(27) C20(26) D20(26)
C18(24) D18(24) C19(25) D19(25)
D4 C4 D3 C3
C1 D1 C2 D2
.100 [2.54]
Size 304 & 400 (Terminal Ident In Parentheses Is For Size 400)
52
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Rectangular Connectors High Density Standard Module (HDSM) Connectors (Continued)
D9(19) C10(20)
C
D1 C1
.226 Typ. [5.74]
C D
D1 C1
Flat Screw, 2 Supplied 2-56 UNC-2A Thd. (Packed Loose)
B10(20) A9(19) .220 [5.59]
.195 [4.95]
B1 A1
(120, 152 & 200)
.160 [4.06] .025 [0.64] C Ref. .050 [1.27] D Ref. A
B1 A1
H Ref. Dim. G Gage Dim.
O .008 M [.2.03] A M
32 AWG, Solder Dipped .050 Radius [1.27] Typ. C Of Radius L Of Leads
(38 & 78)
F Free State "Break Away" Notch (All Leads) C Of L Mtg. Hole
Typ. At .545 [13.84] Dim. Full Radius Typ. .370 [9.40]
E -A-
Torlon Bushing (4 Rqd)
B
Rectangular Connectors
I.D. Of Bushing O .132 O .062-.064 [3.35] [1.57-1.61]
.645 [16.38]
.695 .545 [17.65] [13.84] A A9(38)A19(76)A30(120) A38(152)A50(200) Near Side Marking D9(38)D19(76)D30(120) D38(152)D50(200) Far Side Marking A B A1 Near Side Marking D1 Far Side Marking Polarizing Key, 2 Supplied 2-56 UNC-2B Thd. (Packed Loose)
.348 [8.84] Socket Contact
.050 .188 .015 Typ. [1.27] [4.78 0.38] Housing Insulator
B
Section B-B
Section A-A
B C .025 Typ. [0.64] .195 Ref. [4.95]
A B
.025 [0.64] Typ. .050 Typ. [1.27]
.050 [1.27]
.150 [3.81]
Size 38 & 78
.025 Typ. [0.64] C B .050 [1.27] D Typ.
2
.195 Ref. [4.95]
38 & 78 Position Receptacle
120, 152 & 200 Position Receptacle
.050 [1.27]
.360 [9.14]
Size 120, 152 & 200 Recommended PCB Footprint Pattern
Flat Head Screw (2 Plcs.) 2-56 UNC-2A Thd. (Packed Loose, Customer To Install) B B/2 (2 Plcs.) C1 D1 .360 [9.14] H Ref. Dim. G Gage Dim. F Free State
O .008 M [.2.03] A M
32 AWG, Solder Dipped .050 Radius [1.27] Typ. C Of Radius L Of Leads
(Typ.) At .545 [13.84] Dim. .025 Typ. [0.64] B
.250 [6.35] .160 Typ. [4.06]
Full Radius Typ.
C (2 Plcs.) D (4 Plcs.) .050 Typ. [1.27] A
.226 B1 A1 [5.74] .370 [9.40] .645 .545 [16.38] .695 [17.65] [13.84]
"Break Away" Notch (All Leads) C Of L Mtg. Hole
B
A76(304) A100(400) Near Side Marking D76(304) D100(400) Far Side Marking .250 [6.35]
.050 [1.27] 2 Plcs.
A .025 Typ. [0.64]
.348 [8.84] Socket Contact
.050 .188 .015 Typ. [1.27] [4.78 0.38] Housing Insulator
A1 Near Side Marking D1 Far Side Marking .050 Typ. [1.27]
Section A-A
B
Polarizing Key (2 Plcs.) (Packed Loose, Customer To Install) B A
.050 [1.27] .150 [3.81]
.018 [0.46]
.035 [0.89]
1/2 B (2 Plcs.) .195 [4.95] D Typ. 2 Plcs. C (2 Plcs.)
Size 304 & 400 Recommended PCB Footprint Pattern
53
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Rectangular Connectors High Density Standard Module (HDSM) Connectors (Continued)
No. of Cavities Single Bay 38 78 120 152 200 Double Bay 304 400 4.600 116.84 5.800 147.32 4.440 112.78 5.640 143.26 1.900 48.26 2.500 63.50 .925 23.50 1.225 31.12 A Dim. 1.000 25.40 1.500 38.10 2.050 52.07 2.450 62.23 3.050 77.47 B Dim. .840 21.34 1.340 34.04 1.890 48.01 2.290 58.17 2.890 73.41 C Dim. .450 11.43 .950 24.13 1.500 38.10 1.900 48.26 2.500 63.50 D Dim.
-- -- .725 18.42 .925 23.50 1.225 31.12
How To Specify
S -- Solder pot Z -- Coke Bottle Termination (Receptacle only, see Table I) ZA -- 4 Row Wire Termination (Plug only) ZB -- 8 Row Wire Termination (Plug only) X -- Special Wire and/or other than above HDSM Connector Series Contact Location
1 -- Full complement of contacts 2 -- Contacts in outside row only 3 -- Contacts in inside row only 4 -- Other than above or special housing
1
152
L
4
L
4
0.5
Wire Length Wire Color/Finish
1 -- All white 2 -- All yellow 3 -- All gray 4 -- Gold plated 5 -- Tin dipped gold plated 6 -- Bare (unfinished) 7 -- Color coded per MIL-STD-681, System 1 8 -- Special color code 9 -- Ten basic color repeating on each row (A, B, C, D) (starting with black)
Layout
38, 78, 120, 152, 200, 304 & 400
Contact Type
L -- Low Force Pin SL -- Low Force Socket
Wire Type
*A -- Type E, 7 strand *B -- Type ET, 7 strand *C -- Type E, 19 strand 6--26 AWG 8--28 AWG 0--30 AWG *Per MIL-W-16878 *D -- Type ET, 19 strand F -- 7 strand per MIL-W-22759/11 (#28 AWG only) G -- 19 strand per MIL-W-22759/11 26 AWG, 24 AWG L -- Copper, solid Q -- Stranded per MIL-W-22759/33
Wire Size
4--24 AWG 5--25 AWG
Table I
Dash No. 1 2 3 4
Gap Between Bushing "E" .100 2.54 .093 2.36 .118 2.99 .145 3.68
F Dim. .120 3.05 .060 1.52 .235 5.97 .120 3.05
G Dim. .180 4.57 .150 3.81 .260 6.60 .180 4.57
H Dim. (Ref.) .330 8.38 .330 8.38 .483 12.27 .330 8.38
54
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors Introduction High Density Circular Connectors Product Facts
I
High density, light-weight Multi-Pin Circular Connectors feature a crimp contact retention method, requiring no insertion or removal tools Reverse gender available Ideal for harsh environment Sealed -- Silicon rubber grommet/o-ring Unsealed -- No grommet/ o-ring Meets MIL Standards (high quality) but is not QPL qualified Ideally suited to applications where many conductors must be accommodated in a minimum of space with minimum weight MARC Series Connectors are non-magnetic Contact rating 2.5A
I I I I I
I
I I
Our high density, lightweight Multi-Pin Circular Connectors are the industry's most advanced and are ideally suited to applications where many conductors must be accommodated in a minimum of space with minimum weight. All series of connectors feature a crimp contact retention method, requiring no insertion or removal tools. The MARC 43 Series Connectors conform to applicable performance requirements of MIL-C-26482 and has seen extensive service on many leading aerospace and ground support equipment programs.
The MARC 53 Series Connectors, designed to conform to the USAF high reliability specification MIL-C-38300, as offers high density connector performance. The positive lock coupling mechanism, combined with our exclusive floating interfacial seal, offers outstanding performance under rigorous service conditions. The MARC 63 Series Connectors, our Bayonet Coupling Series, accommodates all insert patterns and layouts available in the MARC 43 Series Connectors, MARC 53 Series Connectors, and RMD Series Connectors. All insert assemblies are
completely interchangeable. Lighter in weight and smaller in size than any comparable connector on the market, it requires up to 50% less engagement/ separation force. Conversion to bayonet coupling shell from MARC 43 Series Connectors or MARC 53 Series Connectors is done without tools by merely transferring the contacts and insert assemblies into the MARC 63 Series Connectors shell. The newest addition to the Multi-Pin product line is the MARC 73 Series Connectors. The twist pin Circular Connector combines the lightweight, bayonet 55
3
Circular Connectors
Catalog 1308638 Revised 8-05 www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425
South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors Introduction (Continued)
coupling feature of the MARC 63 Series Connectors with the twist pin high density, center-to-center contact spacing of 0.065 [1.65] inch. The utilization of 22 AWG twist pin and socket contacts provide for 50% greater contact densities than presently offered in the MARC 43 Series Connectors, MARC 53 Series Connectors, or MARC 63 Series Connectors. The MQR Series is a line of circular quick disconnect connectors for rugged environmental use. Consult Tyco Electronics for detailed information.
SHM Receptacle MARC 43 Series Connectors & MARC 53 Series Connectors
Mated MARC 53 Series Connectors
SHM Receptacle MARC 43 Series Connectors & MARC 53 Series Connectors
Mated MARC 63 Series Connectors
Mated MARC 43 Series Connectors
56
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MARC 43 Series Connectors General Information
A high density (.080 [2.03] contact centers), lightweight, subminiature, cylindrical connector series featuring crimp contacts and fingertip, push-pull, quick disconnect coupling. This series conforms to the applicable performance requirements of MIL-C-26482 and is available in unsealed, environmentally sealed, and hermetic types. A large assortment in insert arrangements -- accommodating AWG 12 through 32 gauge wire and miniature coaxial cables -- is available for the design engineer's choice. The contacts are
retained by shoulder entrapment and can be crimped with the standard M22520 tools, using appropriate locators. This proven series of connectors has a long history of outstanding performance connectors. Inserts are molded from flame-resistant, glass-filled diallyl phthalate, meeting ASTM D5948 requirements. All resilient parts are made of high temperature, silicone rubbers. Fuel resistant compounds are used where swelling affects the performance of the connector. All materials are carefully selected for their non-magnetic properties. The standard finish is clear, non-conductive anodize on
on many military and aerospace programs. MARC 43 Series Connectors are ideal for applications where high performance must be achieved at low cost.
Materials and Finishes
MARC 43 Series Connector housings and quick disconnect couplings are machined from bar stock aluminum to combine maximum strength with minimum weight. Threaded couplings are machined from nonmagnetic, stainless steel bar stock for durability of the coupling threads. Contacts are manufactured from high conductivity copper alloys which have been selected for low contact resistance over the operating range of the
connector housings and quick disconnect couplings. For threaded coupling applications, aluminum components are hard, black anodized, and stainless steel plug coupling is passivated with black oxide finish. Conductive finish modifications include gold, cadmium, and iridite finishes. Contacts are gold plated per MIL-G-45204 requirements. See page 63 for modification information.
Service and Performance Data
I. Electrical -- Electrical Ratings
Current RatingDielectric Contact Amperes, Size Max., +27C1 22 AWG 5 amps 16 AWG 20 amps 12 AWG 50 amps 50 ohm 3 amps 3 amps 75 ohm 95 ohm 3 amps
1
3
Dielectric Dia. (Teflon) -- -- -- .032-.036 .813-.914 .060-.066 1.52-1.68 .100-.104 2.54-2.64 Shield Dia. -- -- -- .048-.054 1.22-1.37 .078-.084 1.98-2.13 .115-.123 2.92-3.12 Jacket Dia.2 .039-.054 .990-1.37 .065-.081 1.65-2.06 .096-.120 2.44-3.05 .065-.087 1.65-2.21 .096-.109 2.44-2.77 .137-.154 3.48-3.91
Circular Connectors
Withstanding Voltage (RMS) 1000 1000 1000 1000 1250 1500
Working Voltage Sea 70,000 ft. Level [21,336 m] Alt. 750 300 750 300 750 300 750 300 1000 300 1250 300
Contact Size 22 163 12 50 ohm 75 ohm 95 ohm
1
Wire Size 22, 24, 26 16, 18, 20 12 AWG 50 ohm 75 ohm 95 ohm
Consult nomograph.
II. Mechanical -- Durability: 500 Cycles Mate/Unmate. Coupling/Uncoupling Forces and Tightening Torques:
Shell Size A B C Coupling/ Uncoupling Force (In-Lbs.) Max. 13 [57.8 N] 17 [75.6 N] 21 [93.4 N] Tightening Torque (In-Lbs.) Retaining Nut Mounting Nut 20, Max. [2.26 Nm] 20, Max. [2.26 Nm] 20, Max. [2.26 Nm] 30-45 [3.39 Nm - 5.08 Nm] 40-55 [4.52 Nm - 6.21 Nm] 55-70 [6.21 Nm - 7.91 Nm]
Conductor Dia. (Stranded)1 .019-.032 .482-.813 .038-.061 .965-1.55 .071-.093 1.80-2.36 .013 Max. .330 .013 Max. .330 .013 Max. .330
Tolerance of conductor diameters required for a reliable crimp. Smaller sizes readily accommodated -- consult Tyco Electronics. Smaller jacketed cable can be accommodated but environmental seal may be impaired. Smooth extruded jacket should be used for consistent wire sealing. 3 Size 16 AWG Contact for size 20 AWG Wire - Use Tool 010-0080-0000.
2
Operating Temperature: -85F to 257F [-65C to +125C].
57
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MARC 43 Series Connectors (Continued) Test Data
MARC 43 Series Connectors meet the applicable performance requirements of specification MIL-C-26482 (Navy) to include the following selected test parameters listed below: DESCRIPTION MIL-C-26482 Test Para Insulation Resistance, Room and High Temp., Para. 4.7.3 Dielectric Withstanding Voltage, Para. 4.7.4 Durability, Para. 4.7.9 Corrosion, Para. 4.7.10 TEST REQUIREMENTS Insulation resistance of unmated connectors shall be 5000 megohms, minimum at room temperature and 2000 megohms, minimum, at 257F [+125C] when measured per MIL-STD-202, Method 302, Test Condition B. No evidence of dielectric breakdown or flashover when mated and unmated plugs are subjected to 1000 volts, rms, per MIL-STD-202, Method 301. Plugs and receptacles designed to withstand up to 500 cycles of engagement and separation without detrimental electrical or mechanical damage to the connectors. Unmated plugs and receptacles shall show no exposure of basis metal due to corrosion which would affect electrical or mechanical performance of the connectors after subjection to 24 hours exposure to salt spray atmosphere per MIL-STD 202, Method 101. Mated connectors shall show no circuit interruptions greater than 10 microseconds during 12 hours vibration to include six sweeps in two axes at -67F [-55C], room temperature, and 257F [+125C] per MIL-STD-202, Method 204, Test Condition B. Post inspection shall show no detrimental cracking, breaking, or loosening of parts. The insulation resistance of mated connectors shall exceed 100 megohms after subjection to moisture resistance testing per MIL-STD-202, Method 106. Contacts shall withstand 15 lbs [66.7 N] axial load without axial displacement in excess of 0.012 [0.305] or damage to contacts or inserts when the axial load is applied to the mating end of the contacts in unmated plugs and receptacles at a rate of approximately 1 lb/sec.
Sweep Vibration, Mated, Para. 4.7.11
Moisture Resistance, Para. 4.7.13 and 4.7.13.1 Contact Retention, Para. 4.7.16
Contact Arrangements1
"A Size" Insert Layouts (A = ) Shell Size 9
Insert Arrangement 2 Number of Contacts Contact Size "B Size" Insert Layouts (B = ) Shell Size 12
-1 -2 19 7 50 Ohm 22 AWG
-5 2-22 AWG 2-50 Ohm
-11 -12 7 12 16 AWG 22 AWG
-14 7-22 AWG 2-50 Ohm
-17 4 16 AWG
-21 6-16 AWG 1-50 Ohm
Insert Arrangement 2 Number of Contacts Contact Size "C Size" Insert Layouts (C = ) Shell Size 15
-9 -103 12 37 50 Ohm 22 AWG
-15 -19 13-22 AWG 12 6-50 Ohm 16 AWG
-34 -37 5 13-22 AWG 95 Ohm 6-12 AWG
-47 5 75 Ohm
-49 29-22 AWG 2-16 AWG
Insert Arrangement 2 Number of Contacts Contact Size
-3 19 50 Ohm
Notes:
1 2 3
-4 61 22 AWG
-7 22-22 AWG 2-75 Ohm
-13 43-22 AWG 2-50 Ohm
-27 5-75 Ohm 4-95 Ohm
-48 12 75 Ohm
Views shown are front face view of receptacles. Front face view of plugs is mirror image of that shown. Arrow ( ) indicates insert top or vertical position in relation to top or vertical position of connector housings. Arrangement also available in hermetic seal receptacles.
58
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MARC 43 Series Connectors (Continued) Part Number and Ordering Information
MARC 43 Series Connector part numbers indicate size, shape, insert layout, type of seal, style of contact and polarization. Note: Pin or socket (power or coaxial) contacts may be used in either plugs or receptacles. However, it is recommended that pins be placed in the receptacle when possiA 43
Denotes Microdot Series
ble to take advantage of our "scoop-proof" design. (The style--pin or socket--of a coaxial contact refers to the outer contact body.) Alternate Keying. Standard alternate polarizing key positions are shown below. Additional polarizing keyways are available upon request.
E H 14
Supplemental Accessory Hardware. We also manufacture supplemental accessory hardware (protective covers, cable clamps, etc.) to adapt these connectors to almost any application. For modifications to fit your requirements, contact Tyco Electronics.
P 5
Polarizing Position N, 1, 2, 3, 4, etc.
Typical Part Number
(***)
Modification Designator when Applicable (See Page 63)
Layout number P = Plug PF = Plug, sq. flange mtg. PT = Plug, threaded cpl. ring
Circular
Size A Size B Size C
Unsealed A Hermetic H Sealed E
H = Receptacle, single hole mtg. F = Receptacle, box mtg. FT = Receptacle, box mtg. (threaded coupl.) J= Receptacle, line cord S = Receptacle, solder mount (Hermetic) B = Receptacle, thru-bulkhead, double end (Hermetic) P = Pin (male) power contacts
Circular Connectors
PP = Double end pins (type B only) S = Socket (female) power CP = Coaxial pin contact, or combination of coaxial pin and pin power contacts CS = Coaxial socket contact, or combination of coaxial socket and socket power contacts Note: If P, S, CP, or CS does not appear in the numbering system, no contacts will be supplied with order (order separately). Use one only
Polarizing Key Positions
All MARC 43 Series Connector multi-pin plugs and receptacles are available in alternate polarizing positions as listed below:
(1)
(1)
(1)
Y X
Y X
3
Size C X 130 130 130 130 190 150 90 70 70 90 210 30 250 130 30 Y 110 90 150 170 110 110 110 110 230 230 110 110 30 30 230
Arrow ( ) indicates top or vertical position (master key-keyway) and coincides with top or vertical position of insert. This relationship remains constant with alternate polarizing key positions. N--for Normal
Plug Size A Part No. A43****N A43****-1 A43****-2 A43****-3 A43****-4 A43****-5 X 130 130 90 210 130 90 Y 110 150 110 110 35 230 Part No. B43****N B43****-1 B43****-2 B43****-3 B43****-4 B43****-5 B43****-6 B43****-7 B43****-8 B43****-9 B43****-10 Size B X 130 130 130 105 155 80 190 130 215 80 130
Receptacle
Y 110 90 145 110 110 110 110 170 110 230 30
Part No. C43****N C43****-1 C43****-2 C43****-3 C43****-4 C43****-5 C43****-6 C43****-7 C43****-8 C43****-9 C43****-10 C43****11 C43****12 C43****13 C43****14
59
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MARC 43 Series Connectors (Continued) Configurations
Type P Straight Plug, Push-Pull Coupling, Sealed or Unsealed (Mates with Receptacles, All Types)
1.266 [32.16] B A
Shell Size A B C
Dimensions A B .766 1.578 40.08 19.46 1.656 .953 42.06 24.21 1.75 1.141 28.98 44.45
Type PF Straight Plug, Square Flange Mounting, Push-Pull Coupling, Sealed or Unsealed (Mates with Receptacles, all Types.)
.175 [4.44]
.062 [1.57]
D
A Dia.
B Typ.
C Typ.
1.266 [32.16]
.110 - .130 p y T [2.79 - 3.30]
.
Panel Cutout
Shell Size A B C
Dimensions A .730 18.54 .920 23.37 1.110 28.19 B .664 16.86 .786 19.96 .924 23.47 C .875 22.23 1.000 25.40 1.125 28.58 D .750 19.05 .940 23.88 1.130 28.70
Type PT Straight Plug, Threaded Coupling, Sealed or Unsealed (Mates with Receptacles, Types H, HH, and FT)
1.500 Max. [38.1]
Master Keyway
A
T Thread Lockwire Holes
Shell Size A B C
A .813 20.65 1.000 25.40 1.19 30.23
Dimensions T (Class 2B) 5/8-32 UN 13/16-28 UN 1-28 UN
60
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MARC 43 Series Connectors (Continued) Configurations (Continued)
Type H Receptacle, Single Hole Mounting Sealed or Unsealed (Mates with Plugs, Types P, PF and PT)
.065-.085 [1.65-2.16] 1.36 [34.54] .080-.100 [2.03-2.54] .125 [3.17] Master Key
A Hex.
C Hex.
D
E
T Thread B Hex.
Panel Cutout
Shell Size A B C
A .75 19.05 .937 23.80 1.125 28.58
B .687 17.45 .875 22.23 1.062 26.97
Dimensions C D E T (Class 2A) .562 .607-.611 .625-.629 5/8-32 UN 15.8-15.97 14.27 15.42-15.52 .75 .794-.798 .812-.816 19.05 20.17-20.27 20.62-20.72 13/16-28 UN .875 .975-.979 .999-1.003 1-28 UN 22.23 24.77-24.87 25.37-25.47
.313 [7.95] max. panel for P & PF .109 [2.77] max. panel. for PT
Circular Connectors
Type 43F Receptacle, Box Mounting, Sealed or Unsealed (Mates with Plugs, Types P and PF)
.065-.085 [1.65-2.16] 1.36 [34.54] .052-.072 [2.03-2.54] Master Polarizing Key
C Hex.
A Typ.
D
3
Panel Cutout
B Typ.
.110-.130 Dia. [2.79-3.30] Typ.
Shell Size A B C
A .875 22.23 1.000 25.40 1.125 28.58
Dimensions B .594 15.08 .786 19.96 .906 23.01
C .562 14.27 .75 19.05 .875 22.23
D .595 15.11 .783 19.89 .960 24.38
Note: Unless otherwise shown, tolerances are: Decimals .015 [.381], fractions 132.
61
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MARC 43 Series Connectors (Continued) Configurations (Continued)
Type FT Receptacle, Box Mounting, Threaded Coupling, Sealed or Unsealed (Mates with Plugs, Types PT, P and PF)
.065-.085 [1.65-2.16] 1.36 [34.54] .052-.072 [2.03-2.54] Master Polarizing Key
D
C Hex.
A Typ.
T Thread
B Typ.
.110-.130 Dia. [2.79-3.30] Typ.
Panel Cutout
Shell Size A B C
A .875 22.23 1.000 25.40 1.125 28.58
B .594 15.08 .786 19.96 .906 23.01
Dimensions C T (Class 2A) .562 5/8-32 UN 14.27 .75 13/16-28 UN 19.05 .875 1-28 UN 22.23
D .645 16.38 .832 21.13 1.020 25.90
Max. panel thickness is .125 [3.18].
Type J Receptacle, Line Cord, Sealed or Unsealed (Mates with Plugs, Types P and PF)
A B
C
Shell Size A B C
A 1.703 43.26 1.781 45.24 1.875 47.63
Dimensions B 1.36 34.54 1.36 34.54 1.36 34.54
C .766 19.46 .953 24.21 1.141 28.98
Note: Unless otherwise shown, tolerances are: Decimals .015 [.381], fractions 132.
62
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MARC 43 Series Connectors (Continued) Accessories
Cable Clamps
C .156 [3.96]
B
B
D
.156 [3.96]
A
A
Straight Shell Size A B C Part No. 086-0099-00X1 086-0100-00X1 086-0101-00X1 A [Max.] .704 17.88 .773 19.63 .829 21.05 B [Max.] .750 19.05 .932 23.67 1.078 27.38 Shell Size A B C Part No. 086-0103-00X1 086-0104-00X1 086-0105-00X1
Right-Angle A [Max.] .737 18.72 .913 23.19 1.048 26.62 B [Max.] .600 15.24 .770 19.55 .962 24.43 C [Max.] 1.100 27.94 1.250 31.75 1.469 37.31 D [Max.] .879 22.33 1.067 27.10 1.233 31.32
Contacts (see pages 78 and 79)
Contact Size 22 AWG 16 AWG 12 AWG 50 ohm Coaxial (Solder Type) 50 ohm Coaxial (Crimp Type) 75 ohm Coaxial 95 ohm Coaxial Pin Part No. 083-0009-00R4 083-0158-00R4 083-0173-00R4 084-0024-00T2 141-1500-0001 084-0025-00T2 084-0026-00T2 Socket Part No. 082-0464-00Y9 082-0113-00T1 082-0132-00T1 084-0027-00T2 142-1500-0001 084-0028-00T2 084-0029-00T2
Contact Cavity Sealing Plugs (see page 80)
Contact Size 22 AWG 16 AWG 12 AWG 50 ohm Coaxial 75 ohm Coaxial 95 ohm Coaxial Sealed Connector Part No. 086-0055-0000 086-0056-0000 086-0057-0000 086-0058-0000 086-0059-0000 086-0060-0000 Unsealed Connector Part No. 086-0001-0000 086-0014-0000 086-0015-0000 086-0061-0000 086-0062-0000 086-0063-0000
Circular Connectors
A
C
B
D
Protective Covers
Shell Size A B C
1
Receptacle Cover Plug Cover Part No.1 With Chain Without Chain 086-0052-00J2 086-0053-00J2 086-0054-00J2 086-0076-00P1 086-0077-00P1 086-0078-00P1
Plug Cover Dimensions (Max.) B C .950 .969 24.13 24.62 .950 1.156 24.13 29.36 .950 1.344 24.13 34.14
Receptacle Cover Part No.1 Without Chain With Chain 086-0049-00J2 086-0050-00J2 086-0051-00J2 086-0073-00P1 086-0074-00P1 086-0075-00P1
3
D .913 23.19 .913 23.19 .913 23.19
A .766 19.46 .953 24.21 1.141 28.98
For threaded plug (PT) and receptacle (FT) covers, consult Tyco Electronics. Wire rope/lanyard attachments and plastic protective caps also available, consult Tyco Electronics.
Modifications
The MARC 43 Series Connector modification identification system provides alteration of standard MARC 43 Series Connectors to include special finishes, accessories, MARC 53 Series Connector housings, and custom quality assurance provisions -- processing, testing, serialization, traceability. Consult your sales representative or Tyco Electronics for additional modification information.
Catalog 1308638 Revised 8-05 www.tycoelectronics.com
Standard modifications include: (009): MARC 43 Series Connector, anodized finish -- black. (048): MARC 43 Series Connector, iridite finish -- gold. (056): MARC 43 Series Connector, cadmium plated -- clear. (057): MARC 43 Series Connector including cable clamp, straight type.
(078): MARC 43 Series Connector insert arrangement plus MARC 53 Series Connector positive lock coupling. (094): MARC 43 Series Connector coaxial insert arrangement to include all-crimp coaxial contacts plus MARC 53 Series Connector positive lock coupling. (098): MARC 43 Series Connector connector including cable clamp, right-angle type. 63
South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425
Circular Connectors MARC 53 Series Connectors General Information
The MARC 53 Series Connector family represents a major advancement in the design of high density (.080 [2.03] contact centers), subminiature, power and coaxial contact connectors. The MARC 53 Series Connectors consists of two connector styles -- the Military approved MD53 featuring shoulder entrapped contacts, and the new RMD53 utilizing rear insertable/ removable contacts. MARC 53 Series Connectors combine positive lock -- the rugged, push-pull, lockcoupling mechanism -- with the unique positive seal multiple sealing system. Positive lock is our new finger-tip, push-pull coupling with the safety lock feature, and is the only connector made with positive "blind mating" indication. When the plug is fully engaged, the coupling ring can be rotated 45 to the safety lock position; if the plug is not completely engaged, the coupling ring cannot be turned to the safety lock position. Consequently, under "blindmating" conditions, it is always possible to determine if the plug is properly engaged without visual reference, damage, or accidental disengagement. The environmental integrity is guaranteed by multiple seal construction using silicone rubber "0" rings and a floating, voidless insert construction. The floating insert design allows the inserts to move within the connector housing to control interfacial sealing pressure in spite of tolerance accumulation, and a compression interfacial seal with minimum engaging force. Both the primary "0" ring system and the continuous dielectric construction withstand the MIL-C-38300A altitude breathing test. The sealing system meets the air leakage requirements of not more than 1 cubic inch of air per hour at a 30 P.S.l. pressure differential. This redundant sealing method is indicative of the inherent reliability built into our connectors. MARC 53 Series Connector power contacts are manufactured from high grade copper alloys, and are designed to be crimped with standard M22520 tooling using subminiature contact locators. MARC 53 Series Connectors incorporate hard insulators in both the plug and receptacle inserts for exceptional contact stability. Shoulder entrapment positively retains the front insertable MD53 contacts between the front and rear insulators. The new RMD53 contacts are rear insertable and removable and are retained within the connector insulators by clips which can be visually inspected. No insertion or extraction tools are required for either the MD53 or RMD53 contacts using nominal size wire. MARC 53 Series Connectors are truly field serviceable... no special tools are required for maintainability. In addition, connector subcomponents damaged through handling or misuse can be procured separately generally without the need to scrap entire connector units. Weight reductions as high as 67% are achieved without loss of performance. MARC 53 Series Connectors are available in both environmental and hermetic styles. In addition to the positive lock plug, a threaded coupling plug is also available. Part numbers for configurations offering various finishes and accessories plus other design variations to satisfy special requirements are also available.
MD53 shoulder entrapped contacts
RMD53 rear insertable contacts
Materials and Finishes
Housings and quick disconnect couplings are machined from bar stock aluminum to combine maximum strength with minimum weight. Threaded couplings are machined from non-magnetic, stainless steel bar stock for durability of the coupling threads. Contacts are manufactured from high conductivity copper alloys which have been selected 64
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
for low contact resistance over the operating range of the connectors. Inserts are molded from flame-resistant, glass-filled diallyl phthalate, meeting ASTM D5948 requirements. All resilient parts are made of hightemperature, silicone elastomers. Fuel resistant compounds are used where swelling affects the performance of the
connector. All materials are selected for their nonmagnetic properties. The standard finish is hard black, non-conductive, anodized finish on connector housings and quick disconnect couplings; stainless steel threaded coupling is passivated with black oxide finish. Conductive finish modifications include gold
finish and electroless nickel finish. Multi-finish modifications for connector plugs include black anodized disconnect coupling with conductive finish on shell grounding members. Contacts are gold plated per MIL-G-45204 requirements. See Page 73 for modification information.
Circular Connectors MARC 53 Series Connectors (Continued) Service and Performance Data
I. Electrical -- Electrical Ratings
Contact Size 22 AWG 16 AWG
1
Current Rating (Amperes, Max., 81F [+27C]) 5 20
Dielectric Withstanding Voltage (RMS) 1000 1000
Working Voltage 110,0001 Sea Ft. Alt. Level 750 300 750 300
Contact Resistance (Millivolts, Max.) 15 20
10,000 ft equals 33,528 m altitude.
Wire Sizes Accommodated
Contact Size 22 AWG 16 AWG
1
Cond. Dia. (Stranded)1 .019-.032 [.483-.813] .038-.061 [.965-1.55]
Jacket Size2 .039-.054 [.991-1.37] 065-.081 [1.65-2.05]
Tolerance of conductor diameters required for a reliable crimp. Smaller sizes readily accommodated -- consult Tyco Electronics. 2 Smaller jacketed cable can be accommodated but environmental seal may be impaired. Smooth extruded jacket should be used for consistent wire sealing. Insulation Resistance: 5000 megohms, minimum, at room ambient conditions.
II. Mechanical -- Durability: 500 Cycles Mate/Unmate. Coupling/Uncoupling Forces and Tightening Torques:
Shell Size 9 12 15 18 Coupling/ Uncoupling Force (In-Lbs.) Max. 18 [80.07 N] 22 [97.86 N] 27 [120.10 N] 32 [142.34 N] Tightening Torque (In-Lbs.) Retaining Nut Mounting Nut 20 [2.26 Nm], Max. 20 [2.26 Nm], Max. 20 [2.26 Nm], Max. 20 [2.26 Nm], Max. 30-45 [3.39 - 5.08 Nm] 40-55 [4.52 - 6.21 Nm] 55-70 [6.21 - 7.91 Nm] 70-85 [7.91 - 9.60 Nm]
Circular Connectors
Operating Temperature: -67F to 257F [-55C to +125C] Connector Mated Length: MD Plug (06) mated to MD Receptacles (00) (01) (02) (12): 2.031 [51.58], max. RMD Plug (06) mated to RMD Receptacles: 2.217 [56.31], max.
3
65
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MARC 53 Series Connectors (Continued) Test Data
MARC 53 Series Connectors exceed the requirements of specification MIL-C-38300A (USAF) as detailed in the applicable M38300A (USAF) military specification sheets. MARC 53 Series Connectors meet the following selected test parameters as specified below: DESCRIPTION MIL-C-38300 Test Para Contact Retention Para. 4.10.3
TEST REQUIREMENTS MD Contacts shall withstand 15 lbs [66.72 N] axial load and RMD contacts 10 lbs [44.48 N] axial load without axial displacement in excess of 0.012 [.305] or damage to contacts or inserts when the axial load is applied to the mating end of the contacts in unmated plugs and receptacles at a rate of approximately 1 lb/sec. [4.45 N]. The potential drop across normally mated contacts shall not exceed 25 mv under room ambient and high temperature service conditions when measured as specified in MIL-C-26636, Fig. 2, with maximum rated current. No evidence of dielectric breakdown or flashover when mated and unmated plugs are subjected to 645 and 180 volts RMS, respectively, at altitudes up to 110,000 feet [33,528 m] and 1000 volts RMS at sea level. Insulation resistance of mated plugs and receptacles shall be 5000 megohms, minimum, at room temperature and 1000 megohms, minimum, at 257F [+125C] when measured per MIL-STD-202, Method 302, Test Condition B. Plugs and receptacles shall withstand up to 500 cycles of engagement and separation (locking mechanism actuated with each cycle) without detrimental damage to plugs or receptacles or not satisfying subsequent tests of MIL-C-38300. Mating and unmating forces shall not exceed 27 Ibs, [120.10 N] maximum, (15 shell size) after fully wired plugs and receptacles are immersed for 20 hours, each, in hydraulic fluid (MIL-H-5606) and high temperature lubricating oil (MIL-L-9236) followed by a one-hour dry. Mated connectors shall show no circuit interruptions greater than one microsecond during 12 hours vibration to include six sweeps in each axis at extreme temperatures of -85F [-65C] and 257F [+125C] per MIL-STD-202, Method 204, Test Condition D. Post inspection shall show no detrimental cracking, breaking, or loosening of parts. The insulation resistance of mated connectors shall exceed 1000 megohms after subjection to moisture resistance testing per MIL-STD-202, Method 106, as amended by MIL-C-38300. The insulation resistance of wired and mated connectors shall be 5000 megohms, minimum, and there shall be no flashover or breakdown at a test voltage of 1000 volts RMS after the third cycle and while immersed in 5% salt water solution at 68F [20C] and room ambient pressure pressure at 68F [20C]. Unmated plugs and receptacles shall show no excessive corrosion which would detrimentally affect the electrical and mechanical performance of the connectors after subjection to 24 hours exposure to salt spray atmosphere per MlL-STD-202, Method 101.
Contact Resistance Para. 4.10.8 Dielectric Withstanding Voltage, Altitude and Sea Level Para. 4.10.10 Insulation Resistance, Room and High Temp. Para. 4.10.13 and 4.10.13.1 Coupling and Uncoupling Para. 4.11.3 Fluid Immersion Para. 4.11.5
Sweep Vibration, Mated Para. 4.11.6
Moisture Resistance Para. 4.11.8 Altitude Breathing Para. 4.11.12
Salt Spray Para. 4.11.13
66
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MARC 53 Series Connectors (Continued) Contact Arrangements 1,2
Shell Size 9 Shell Size 12 Shell Size 15 Shell Size 186
Insert Arrangement 3 Number of Contacts Contact Size
9-19 4,5 19 22 AWG
12-37 4,5 37 22 AWG
Shell Size 15
15-31 5 31 16 AWG
Shell Size 15
18-91 4,5 91 22 AWG
Shell Size 15
Shell Size 9
Insert Arrangement 3 Number of Contacts Contact Size
9-7 5 7 16 AWG
1 2
15-61 4,5 61 22 AWG
15-55 55 22-20 AWG
15-43 1-95 ohm 42-22 AWG
Views shown are front face view of receptacles. Front face view of plugs is mirror image of that shown. In addition to those inserts shown, MARC 43 Series Connector inserts may be utilized in MARC 53 Series Connector housings. See page 63, MARC 43 Series Connector modifications. 3 Arrow ( ) indicates insert top or vertical position in relation to top or vertical position of connector housings. 4 Arrangement also available in RMD style. 5 Arrangement also available in hermetic seal receptacles. 6 Arrangement available in 06, 00, 01.
Circular Connectors
Part Number and Ordering Information
MARC 53 Series Connector part numbers indicate size, shape, insert layout, type of seal, style of contact and polarization. Note: Pin or socket (power or coaxial) contacts may be used in either plugs or receptacles. However, it is recommended that pins be placed in the receptacles when possible to take advantage of our "scoopproof" design. Alternate Keying -- Standard alternate polarizing key positions are shown below. Additional polarizing keyways are available upon request. Supplemental Accessory Hardware -- We also manufacture supplemental accessory hardware (protective covers, shield adapters, etc.) to adapt these connectors to almost any application. For modifications to fit your requirements, contact Tyco Electronics.
3
Typical Part Number
MD53
06
E
15
61
S
N
(***)
Modification Designator when applicable (See page 73)
Series -- MD53 or RMD53 style Single hole mntng. receptacle Line cord recept. Box mntng. recpt. Straight plug, positive lock quick disconnect Box mntng. recept., thd Straight plug, threaded coupling 00
Polarizing position N, 1, 2, 3, 4, etc. P -- Pin, Power Pin, Coaxial Pin S -- Socket, Power Socket, Coaxial Socket NOTE: If P or S does not appear in the numbering system, no contacts will be supplied with order (order separately) Insert arrangement number Shell Size -- O.D. of receptacle barrel to nearest .063 [1.60] E -- Environmentally sealed H -- Hermetic seal (receptacle only).
01 02 06
12 16
67
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MARC 53 Series Connectors (Continued) Polarizing Key Positions
All of our multi-pin plugs and receptacles are available in alternate polarizing positions as listed below:
Y X
X
(1)
(1)
Y
Plug (Shell sizes 9, 12, 15 only) Shell Size 9 Part No. (R) MD53-***9-***-N (R) MD53-***9-***-1 (R) MD53-***9-***-2 (R) MD53-***9-***-3 (R) MD53-***9-***-4 (R) MD53-***9-***-5
Receptacle (Shell sizes 9, 12, 15 only)
X 130 130 90 210 130 90
Y 110 150 110 110 35 230
Shell Size 12 X Part No. (R) MD53-***12-***-N 130 (R) MD53-***12-***-1 130 (R) MD53-***12-***-2 130 (R) MD53-***12-***-3 105 (R) MD53-***12-***-4 155 (R) MD53-***12-***-5 80 (R) MD53-***12-***-6 190 (R) MD53-***12-***-7 130 (R) MD53-***12-***-8 215 (R) MD53-***12-***-9 80 (R) MD53-***12-***-10 130
Y 110 90 145 110 110 110 110 170 110 230 30
Shell Size 15 Part No. X (R) MD53-***15-***-N 130 (R) MD53-***15-***-1 130 (R) MD53-***15-***-2 130 (R) MD53-***15-***-3 130 (R) MD53-***15-***-4 190 (R) MD53-***15-***-5 150 (R) MD53-***15-***-6 90 (R) MD53-***15-***-7 70 (R) MD53-***15-***-8 70 (R) MD53-***15-***-9 90 (R) MD53-***15-***-10 210 (R) MD53-***15-***-11 30 (R) MD53-***15-***-12 250 (R) MD53-***15-***-13 130 (R) MD53-***15-***-14 30
(1)
Y 110 90 150 170 110 110 110 110 230 230 110 110 30 30 230
(1)
A
A
E
B
B
E
C D
C D
Plug (Shell size 18 only) Shell Size 18 B A 60 130 70 130 55 130 50 130 125 75 80 150 50 90 120 70 130 70 35 90 140 75
Receptacle (Shell size 18 only)
Part No. (R) MD53-***18-***-N (R) MD53-***18-***-1 (R) MD53-***18-***-2 (R) MD53-***18-***-3 (R) MD53-***18-***-4 (R) MD53-***18-***-5 (R) MD53-***18-***-6 (R) MD53-***18-***-7 (R) MD53-***18-***-8 (R) MD53-***18-***-9 (R) MD53-***18-***-10
C 185 205 210 190 190 205 175 175 205 130 210
D 250 270 250 235 250 250 250 250 260 215 250
E 325 320 310 305 320 300 315 295 325 285 310
(1)
Arrow ( ) indicates top or vertical position (master key/keyway) and coincides with top or vertical position of insert shown on page 59. This relationship remains constant with alternate polarizing key positions. (R) Rear insertable and removable.
68
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MARC 53 Series Connectors (Continued) Configurations
MD53-06E/RMD53-06E Straight Plug, positive lock Coupling, Environmental (Mates with Receptacles, All Types)
B C .093 Max., [2.36] RMD only A Master Keyway
Shell Size 9 12 15 18
A .890 22.60 1.078 27.38 1.262 32.05 1.577 40.06
Dimensions B (Max.) 1.000 25.4 1.000 25.4 1.000 25.4 1.000 25.4
C (Max.) 1.281 32.54 1.281 32.54 1.281 32.54 1.281 32.54
Circular Connectors
MD53-16E/RMD53-16E Straight Plug, Threaded Coupling, Environmental (Mates with Receptacles, Types 00 and 12; Not available in 18 Shell Size)
Master Keyway
A
B C .093 Max., [2.36] RMD only
Lockwire Holes
T Thread
3
Shell Size 9 12 15 18
A .812 20.62 1.000 25.4 1.187 30.15 1.437 36.50
B (Max.) 1.125 28.57 1.125 28.57 1.125 28.57 1.125 28.57
Dimensions C (Max.) 1.500 38.1 1.500 38.1 1.500 38.1 1.437 36.50
T (Class 2B) 5/8-32UN 13/16-28UN 1-28UN 1-14-28UN
69
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MARC 53 Series Connectors (Continued) Configurations (Continued)
MD53-00E/RMD53-00E Receptacle, Single Hole Mounting, Environmental (Mates with Plugs, Type 06 and 16)
C .125 [3.18] Master Key
.065-.085 [1.65-2.16] G .080-.100 [2.03-2.54]
A Hex. E D
F Hex.
Panel Cutout
T Thread .093 Max., [2.36] RMD Only B Hex.
Shell Size 9 12 15 18
A .75 19.05 .937 23.80 1.125 28.58 1.625 41.28
B .687 17.45 .875 22.23 1.062 26.97 1.375 34.93
C 1.360 34.54 1.360 34.54 1.360 34.54 1.360 34.54
D .607-.611 15.42-15.52 .794-.798 20.17-20.27 .975-.979 24.76-24.86 1.214-1.218 30.83-30.94
Dimensions E .625-.629 15.87-15.97 .812-.816 20.62-20.73 .999-1.003 25.37-25.48 1.251-1.255 31.77-31.87
F .563 14.30 .75 19.05 .875 22.23 1.125 28.58
G .090 2.29 .090 2.29 .090 2.29 .125 3.18
T (Class 2A) 5/8-32NS 13/16-28NS 1-28UNS 1-1/4-28UN
Note: .313 [7.95] Maximum Panel Thickness when mated with a positive lock 06 Plug. .109 [2.77] Maximum Panel Thickness when mated with threaded 16 Plug.
MD53-01E/RMD53-01E Receptacle, Line Cord, Environmental (Mates with Plug, Type 06)
C Hex. B
Master Key
A .093 Max., [2.36] RMD only
Shell Size 9 12 15 18
A (Max.) 1.360 34.54 1.360 34.54 1.360 34.54 1.360 34.54
Dimensions B (Max.) .766 19.46 .953 24.21 1.141 28.98 1.578 40.08
C .562 14.27 .75 19.05 .875 22.23 1.125 28.58
Note: Unless otherwise shown, tolerances are: decimals .015 [.381]; fractions 132.
70
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MARC 53 Series Connectors (Continued) Configurations (Continued)
.065-.085 [1.65-2.16] 1.36 [34.54] .052-.072 [1.32-1.80] Master Polarizing Key
D
MD53-02E/RMD53-02E Receptacle, Box Mounting, Environmental (Mates with Plug, Type 06)
C Hex.
A Typ.
.093 Max. RMD only [2.36]
B Typ.
.110-.130 Dia. [2.79-3.30] Typ.
Panel Cutout .375 [9.53] Max. Panel Thickness for rear-mount applications.
Shell Size 9 12 15 18
A .875 22.23 1.000 25.40 1.125 28.58 1.344 34.14
Dimensions B C .594 .563 15.09 14.30 .786 .75 19.96 19.05 .875 .906 23.01 22.23 1.062 1.125 26.97 28.58
D .595 15.11 .783 19.89 .960 24.38 1.212 30.78
Circular Connectors
MD53-12E/RMD53-12E Threaded Coupling Receptacle, Box Mounting, Environmental (Mates with Plugs, Type 06 and 16; not available in 18 Shell Size)
.065-.085 [1.65-2.16]
1.36 [34.54] .052-.072 [1.32-1.80] Master Polarizing Key
D
C Hex. A Typ.
3
Panel Cutout .125 [3.18] Max. Panel Thickness when mated with threaded 16 Plug for rear mount applications. D .645 16.38 .832 21.13 1.020 25.91
T Thread .093 Max. RMD only [2.36] B Typ.
.110-.130 Dia. [2.79-3.30] Typ.
Shell Size 9 12 15
A .875 22.23 1.000 25.40 1.125 28.58
B .594 15.09 .786 19.96 .906 23.01
Dimensions C T (Class 2A) .563 5/8-32UN 14.30 .75 13/16-28UN 19.05 .875 1-28UN 22.23
Note: Unless otherwise shown, tolerances are: decimals .015 [.381]; fractions 132.
71
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MARC 53 Series Connectors (Continued) Accessories
Test Adapter The test adapter accessory is utilized primarily as a connector simulator to preserve the end-use connector where this connector would be subjected to extensive testing, matings, or probings. The test adapter, when mated, provides the exact mating interface as that of the end-use connector and is completely field serviceable.
Test Adapter Product Part Number System How to Specify
T 53 E 15 61 SP N (XXX) Modification Designator Polarizing Position Contact Sex
SP -- Sockets Plug end, Pins Receptacle end PS -- Pins Plug end, Sockets Receptacle end
Layout Shell Size Adapter Type
E -- Sealed A -- Unsealed
Series or Style
53 -- MARC 53 Series Connector 63 -- MARC 63 Series Connector
Test Adapter
Shell Size 9 12 15 18
Dimension A (Max.) B (Max.) .906 2.670 23.01 67.82 1.094 2.670 27.79 67.82 1.281 2.670 32.54 67.82 1.594 2.670 40.49 67.82
B
A Dia.
A
C
B
D
Receptacle Cover
Plug Cover
Protective Covers
Shell Size 9 12 15 18
1
Receptacle Cover Part No.1 With Chain Without Chain 086-0049-00AL 086-0050-00AL 086-0051-00AL 086-0146-00AL 086-0073-00W3 086-0074-00W3 086-0075-00W3 086-0139-00W3
Plug Cover Part No.1 With Chain Without Chain 086-0052-00L6 086-0053-00L6 086-0054-00L6 086-0147-00L6 086-0076-00P2 086-0077-00P2 086-0078-00P2 086-0140-00P2
A .766 19.46 .953 24.21 1.141 28.98 1.578 40.08
Dimensions (Max.) B C .969 .950 24.13 24.61 .950 1.156 29.36 24.13 .950 1.344 24.13 34.14 1.000 1.781 25.4 45.24
D .913 23.19 .913 23.19 .913 23.19 .913 23.19
For threaded plug (PT) cover, consult Tyco Electronics. Wire rope/lanyard attachments and plastic protective caps also available, consult Tyco Electronics.
72
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MARC 53 Series Connectors (Continued) Accessories (Continued)
T
Cable Clamps
Shell Size 9 12 15 18 Clamp Part No. RMD MD A B T Thd. 2A
.156 [3.96]
.704 086-0099-00F5 086-0175-00F3 17.88 086-0100-00F5 086-0176-00F3 .773 19.63 086-0101-00F5 086-0177-00F3 .829 21.06 086-0142-00F5 086-0178-00F3 .890 22.61
.750 19.05 1/2-20 UNF .932 UNEF 23.67 11/16-24 1.078 27.38 13/16-24 UNEF 1.250 1-28 UN 31.75
B
A
Straight
Shell Size 9 12 15 18
MD
Clamp Part No. RMD 086-0179-00F3 086-0180-00F3 086-0181-00F3 086-0182-00F3
A .737 18.72 .913 23.19 1.048 26.62 1.225 31.12
B (Max.) C (Max.) .600 15.24 .775 19.68 .962 24.43 1.185 30.01 1.100 27.94 1.250 31.75 1.469 37.31 1.550 39.37
D
T Thd. 2A
C .156 [3.96] B
086-0103-00F5 086-0104-00F5 086-0105-00F5 086-0143-00F5
.879 1/2-20 UNF 22.32 1.067 27.10 11/16-24 UNEF 1.233 31.32 13/16-20 UNEF 1.550 1-28 UN 39.37
D
T A
Right-Angle
Circular Connectors
Contacts (see pages 78 and 79)
Contact Size 22 AWG 16 AWG Pin Part No. MD RMD 083-0009-00R4 083-1200-00R4 -- 083-0158-00R4 Socket Part No. MD RMD 082-0464-00Y9 082-0462-00Y9 082-0113-00T1 --
Note: Standard packaging includes same quantity of contacts as contact cavities in insert.
Contact Cavity Sealing Plugs (see page 80)
Contact Size 22 AWG 16 AWG Standard Length Part No. MD RMD 086-0055-0000 086-0148-0000 -- 086-0056-0000 Short Length Part No. MD RMD 082-0009-0000 086-0009-0000 082-0010-0000 --
3
Note: Standard length plug occupies contact cavity and wire sealing grommet. Short length plug occupies wire sealing grommet only (to be used behind non-wired contacts and in plugs which mate to hermetic receptacles).
Modifications
We offer a unique modification identification system which provides alteration of standard MARC 53 Series Connectors to include special finishes, accessories, MARC 43 Series Connector contact arrangements, and custom quality assurance provisions -- processing, testing, serialization, traceability. Consult Tyco Electronics for additional modification information.
Standard modifications include: (503): MARC 53 Series Connector including cable clamp, straight type (504): MARC 53 Series Connector including cable clamp, rightangle type (506): MARC 53 Series Connector, gold finish
(507): MARC 53 Series Connector, electroless nickel finish (508): MARC 53 Series Connector, black anodized coupling ring, gold over electroless nickel housings, retaining nuts and hardware.
73
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MARC 63 Series Connectors MARC 63 Series Connectors RMD63 Performance Data
MARC 63 Series Connectors,0 RMD63 Series meet or exceed the performance requirements of specification MIL-C38300A (USAF) as detailed in the M38300A (USAF) military specification sheets covering the MARC 53 Series Connectors. Tyco Electronics can supply detailed, cross reference information. MARC 63 Series Connectors, RMD63 Series meet the following selected test parameters as specified below: DESCRIPTION Contact Retention TEST REQUIREMENTS Contacts are to withstand 15 lbs. [66.72 N] axial load and RMD contacts 10 lbs. [44.48 N] axial load without axial displacement in excess of 0.012 [.305] or damage to contacts or inserts when the axial load is applied to the mating end of the contacts in unmated plugs and receptacles at a rate of approximately 1 lb/sec. [4.45 N]. The potential drop across normally mated contacts shall not exceed 25 mv under room ambient and high temperature service conditions when measured as specified in MIL-C-26636, Fig. 2, with maximum rated current. No evidence of dielectric breakdown or flashover when mated and unmated plugs are subjected to 645 and 180 volts RMS, respectively, at altitudes up to 110,000 [33,528 m] feet and 1000 volts RMS at sea level. Insulation resistance of mated plugs and receptacles shall be 5000 megohms, minimum, at room temperature and 1000 megohms, minimum, at 257F [+125C] when measured per MIL-STD-202, Method 302, Test Condition B. Plugs and receptacles shall withstand up to 500 cycles of engagement and separation without detrimental damage to plugs or receptacles or not satisfying subsequent tests of MIL-C-38300. Mating and unmating forces shall not exceed 27 lbs. [120.10 N], maximum, (15 shell size) after fully wired plugs and receptacles are immersed for 20 hours, each, in hydraulic fluid (MIL-H-5606) and high temperature lubricating oil (MIL-L-9236) followed by a one-hour dry. Mated connectors shall show no circuit interruptions greater than one microsecond during 12 hours vibration to include six sweeps in each axis at extreme temperatures of -85F [-65C] and 257F [+125C] per MIL-STD-202, Method 204, Test Condition D. Post inspection shall show no detrimental cracking, breaking, or loosening of parts. The insulation resistance of mated connectors shall exceed 1000 megohms after subjection to moisture resistance testing per MIL-STD-202, Method 106, as amended by MIL-C-38300. The insulation resistance of wired and mated connectors shall be 5000 megohms, minimum, and there shall be no flashover or breakdown at test voltage of 1000 volts RMS after the third cycle and while immersed in 5% salt water solution at 68F [20C] and room ambient pressure at 68F [20C]. Unmated plugs and receptacles shall show no excessive corrosion which would detrimentally affect the electrical and mechanical performance of the connectors after subjection to 24 hours exposure to salt spray atmosphere per MIL-STD-202, Method 101.
Contact Resistance
Dielectric Withstanding Voltage, Altitude and Sea Level Insulation Resistance, Room and High Temp. Coupling and Uncoupling
Fluid Immersion
Sweep Vibration, Mated
Moisture Resistance
Altitude Breathing
Salt Spray
74
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MARC 63 Series Connectors (Continued) Part Number and Ordering Information
Connector part numbers indicate size, shape, insert layout, type of seal, style of contact and polarization.
Note: Pin or socket (power or coaxial) contacts may be used in either plugs or receptacles. However, it is recommended that pins be placed in the receptacle when possible to take advantage of our "scoop-proof" design.
Typical Part Number
MD63
06
E
15
61
S
N
(***)
Modification Designator when applicable (See page 77)
Series -- MD63 or RMD63 style Single hole mntng. receptacle Line cord recept. Box mntng. recpt. Straight plug, bayonet quick disconnect 00
Polarizing position (1) N, 1, 2, 3, 4, etc. . . . P -- Pin power contact S -- Socket power contact Insert arrangement number (2) Shell Size -- O.D. of receptacle barrel to nearest 1/16 inch E -- Environmentally sealed H -- Hermetic seal (receptacle only).
01 02 06
Circular Connectors
(1) For polarizing key positions see MARC 53 Series Connectors. (2) For contact arrangements see MARC 53 Series Connectors. Note: If P or S does not appear in the numbering system, no contacts will be supplied with order (order separately).
Configurations
MD63-06E/RMD63-06E Straight Plug, Bayonet Coupling, Environmental and Non-Environmental (Mates with Receptacles 02, 00 and 01)
Master Polarizing Keyway
3
A B C .093 Max. [2.36]
Shell Size 9 12 15 18
A .813 20.65 1.000 25.40 1.125 28.58 1.594 40.49
Dimensions B (Max.) 1.000 25.4 1.000 25.4 1.000 25.4 1.000 25.4
C (Max.) 1.288 32.72 1.288 32.72 1.288 32.72 1.288 32.72
75
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MARC 63 Series Connectors (Continued) Configurations (Continued)
MD63-02E/RMD63-02E Receptacle, Box Mounting, Environmental and NonEnvironmental (Mates with Plug, Type 06)
A Typ. Master Polarizing Key .110-.130 Dia. [2.79-3.302] 4 Holes
B Typ.
C Hex.
.093 Max. [2.36] .065-.085 [1.65-2.16] 1.360 [34.54]
.052-.072 [1.32-1.83]
D
Panel Cutout .375 [9.53] Max. Panel Thickness for rear mount applications.
Shell Size 9 12 15 18
A .875 22.23 1.000 25.40 1.125 28.58 1.344 34.14
B .662 16.81 .786 19.96 .906 23.01 1.062 26.97
Dimensions C .562 14.27 .75 19.05 .875 22.23 1.125 28.58
D .693-.697 17.60-17.70 .881-.885 22.38-22.48 1.006-1.011 25.55-25.68 1.250-1.260 30.48-32.00
MD63-00E/RMD63-00E Receptacle, Single Hole Mounting, Environmental and Non-Environmental (Mates with Plug, Type 06)
Master Polarizing Key
.125 [3.18]
B Hex.
A Hex.
F Hex.
D
T Thread
C
.093 Max. [2.36]
E
Panel Cutout
Shell Size 9 12 15 18
A .813 20.65 1.000 25.40 1.125 28.58 1.625 41.28
B .75 19.05 .937 23.80 1.062 26.97 1.375 34.93
C 1.360 34.54 1.360 34.54 1.360 34.54 1.360 34.54
Dimensions D E .669-.673 .693-.697 16.99-17.09 17.60-17.70 .850-.856 .881-.885 21.59-21.74 22.38-22.48 .975-.979 1.006-1.010 24.76-24.87 25.55-25.65 1.212-1.216 1.251-1.255 30.78-30.88 31.78-31.88
F .562 14.27 .75 19.05 .875 22.23 1.125 28.58
T (Class 2A) 11/16-32UN 7/8-28UN 1-28UN 1-1/4-28UN
MD63-01E/RMD63-01E Receptacle, Line Cord, Environmental (Mates with Plug, Type 06)
Master Polarizing Key
Shell Size
B C Hex.
9 12
.093 Max. [2.36] A
15 18
A 1.360 34.54 1.360 34.54 1.360 34.54 1.360 34.54
Dimensions B (Max.) .703 17.86 .891 22.63 1.016 25.81 1.203 30.56
C .562 14.27 .75 19.05 .875 22.23 1.125 28.58
76
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MARC 63 Series Connectors (Continued) Accessories
Cable Clamps
T Thread
Shell Size 9
B
Part No. 086-0175-00N1 086-0176-00N1 086-0177-00N1 086-0178-00N1
12
.156 [3.96] A
15 18
.225 Max. [5.72]
A .704 17.88 .773 19.63 .829 21.06 .890 22.61
B .750 19.05 .932 23.67 1.078 27.38 1.250 31.75
T Thread 1/2-20UNF-2A 11/16-24UNEF-2A 13/16-20UNEF-2A 1-28UN-2A
Straight
C .225 Max. [5.72] .156 [3.96] B
D T Thread A
Angle Shell Size 9 12 15 18 Part No. 086-0179-00N1 086-0180-00N1 086-0181-00N1 086-0182-00N1 A .737 18.72 .913 23.19 1.048 26.62 1.225 31.12 B (Max.) .600 15.24 .785 19.94 .962 24.43 1.185 30.10 C (Max.) 1.100 27.94 1.250 31.75 1.469 37.31 1.550 39.37 D .879 22.32 1.067 27.10 1.233 31.21 1.550 39.37 T Thread 1/2-20UNF-2A
Circular Connectors
11/16-24UNEF-2A 13/16-20UNEF-2A 1-28UN-2A
A
C
3
Protective Covers
Shell Size 9 12 15 18 Receptacle Part No. With Chain Without Chain 086-0253-00P2 086-0254-00P2 086-0255-00P2 086-0256-00P2 086-0257-00L6 086-0258-00L6 086-0259-00L6 086-0260-00L6
B D
Plug Part No. With Chain Without Chain 086-0261-00F5 086-0262-00F5 086-0263-00F5 086-0264-00F5 086-0265-00L6 086-0266-00L6 086-0267-00L6 086-0268-00L6
A .813 20.65 1.000 25.40 1.125 28.58 1.594 40.49
Dimensions B C .950 .813 24.13 20.65 1.000 .950 24.13 25.40 .950 1.125 24.13 28.58 .950 1.594 24.13 40.49
D .913 23.19 .913 23.19 .913 23.19 .913 23.19
Plastic Protective Covers also available; consult Tyco Electronics.
Modifications
We offer a unique modification system which provides alteration of standard MARC 63 Series Connectors to include special finishes, accessories, and custom
Catalog 1308638 Revised 8-05 www.tycoelectronics.com
quality assurance provisions -- processing, testing, serialization, traceability. Consult your sales representative or Tyco Electronics for additional modification information.
Standard modifications include: (801): MARC 63 Series Connector, electroless nickel finish
(803): MARC 63 Series Connector including cable clamp, straight type (804): MARC 63 Series Connector including cable clamp, rightangle type 77
South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425
Circular Connectors Contacts for MARC 43, MARC 53 and MARC 63 Connectors
MARC 43, MD53, MD63 Series
.452 [11.48] .702 [17.83]
.060-.064 Dia. [1.52-1.63]
Wire Inspection Hole
.030-.032 Dia. [0.76-0.81]
Part Number 083-0009-00R4 (6-1532030-1) 22 AWG Pin
MARC RMD53, RMD63 Series
.767 [19.48] .515 [13.08]
.505-.525 [12.83-13.33]
.055-.058 Dia. [1.40-1.47]
Wire Inspection Hole
.030-.032 Dia. [0.76-.0.81]
.051-.055 Dia. [1.30-1.40]
Wire Inspection Hole
.055-.058 Dia. [1.40-1.47]
Part Number 083-1200-00R4 (4-1532036-8) 22 AWG Pin
Part Number 082-0461-00Y9 (5-1532030-6) 22 AWG Socket
MARC 43, MD53, MD63 Series
.702 [17.83] .452 [11.48]
.445-.460 [11.30-11.68]
.086-.090 Dia. [2.18-2.29]
Wire Inspection Hole
.061-.063 Dia. [1.55-1.60]
.086-.092 Dia. [2.18-2.34]
Wire Inspection Hole
Part Number 083-0158-00R4 (8-1532030-1) 16 AWG Pin
Part Number 082-0113-00T1 (3-1532030-3) 16 AWG Socket
MARC 43 Series
.702 [17.83] .452 [11.48] .121-.126 Dia. [3.07-3.20]
.445-.460 [11.30-11.68]
.139-.143 Dia. [3.53-3.63]
.139-.143 Dia. [3.53-3.63]
Wire Inspection Hole
.093-.096 Dia. [2.36-2.44]
.121-.126 Dia. [3.07-3.20]
Wire Inspection Hole
Part Number 083-0173-00R4 12 AWG Pin
Part Number 082-0132-00T1 (3-1532030-4) 12 AWG Socket
MARC MD53, MD63 Series
.452 [11.48]
.702 [17.83] .049-.053 Dia. [1.24-1.35]
.068-.072 Dia. [1.73-1.83]
Wire Inspection Hole
.030-.032 Dia. [0.76-0.81]
Part Number 083-1435-00R4 (7-1532037-3) 22-20 AWG Pin
78
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors Contacts for MARC 43, MARC 53 and MARC 63 Connectors (Continued)
MARC 43, MD53, MD63 Series
.451-.462 [11.46-11.73]
.060-.064 Dia. [1.52-1.63]
Wire Inspection Hole
.051-.055 Dia. [1.30-1.40]
Part Number 082-0464-00Y9 (5-1532030-7) 22 AWG Socket
MARC MD53, MD63 Series
.451-.462 [11.46-11.73]
.068-.072 Dia. [1.73-1.83]
Wire Inspection Hole
.051-.055 Dia. [1.30-1.40]
Part Number 082-0466-00Y9 22-20 AWG Socket
Coaxial Contacts
MARC 43, MD53, MD63 Series
Circular Connectors
Solder Type Coaxial Contacts
A
B
B
A
CP Type
CS Type
Contact 50
75
95
Part No. 084-0027-00T2 (5-1532129-8) 084-0024-00T2 (5-1532129-7) 084-0028-00T2 (5-1532129-9) 084-0025-00T2 (7-1532155-0) 084-0029-00T2 (5-1532168-1) 084-0026-00T2
Type CS CP CS CP CS CP
A Dia. .109 2.77 .093 2.36 .123 3.12 .106 2.69 .168 4.27 .149 3.78
B .452 11.48 .600 15.24 .452 11.48 .600 15.24 .452 11.48 .600 15.24
3
MARC 43 Series LEPRA/CON Crimp Type, 50 Ohm Coaxial Contacts
.425 [10.80]
.600 [15.24]
.120 [3.05] Crimp Approx.
.210-.240 [5.33-6.10] Crimp Length
Part Number 142-1500-0001 CS Socket
Part Number 141-1500-0001 CP Pin
79
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors Contact Cavity Sealing Plugs
Size Part No. Application
.047-.055 Dia. [1.19-1.40]
Description
.447 [11.35] .057-.065 Dia. [1.45-1.65]
086-0001-0000
Unsealed 43 Series
22 AWG
086-0009-0000
Sealed 43 Series MD53, RMD53 MD63, RMD63
.421 [10.70]
.045-.053 Dia. [1.14-1.35]
086-0148-0000
RMD53, RMD63
.940 [23.88]
.046-.054 Dia. [1.17-1.37]
086-0056-0000
Sealed 43 Series MD53, MD63
.075-.083 Dia. [1.91-2.11]
.940 [23.88]
16 AWG
086-0010-0000
Sealed 43 Series MD53, MD63
.421 [10.70]
.075-.083 Dia. [1.91-2.11]
.452 [11.48]
.086-.094 Dia. [2.18-2.39]
086-0014-0000
Unsealed 43 Series
086-0057-0000 12 AWG 086-0015-0000
Sealed 43 Series
.140-.148 Dia. [3.56-3.76]
.940 [23.88]
.125-.133 Dia. [3.18-3.38]
Unsealed 43 Series
.121-.129 Dia. [3.07-3.28]
.447 [11.35]
.140-.148 Dia. [3.56-3.76]
22/20 AWG
086-0251-0000
MD53, MD63
.052-.055 Dia. [1.32-1.40]
.940 [23.88] .069-.073 Dia. [1.75-1.85]
.049-.053 Dia. [1.24-1.35]
Size 5052 7552 9552 5052 7552 9552
Part No. 086-0061-0000 086-0062-0000 086-0063-0000 086-0058-0000 086-0059-0000 086-0060-0000
Application
Unsealed 43 Series
Sealed 43 Series
A Dia. .112-.120 2.84-3.05 .135-.143 3.43-3.63 .178-.186 4.52-4.72 .081-.089 2.06-2.26 .106-.114 2.69-2.90 .151-.159 3.84-4.04
B Dia. -- -- -- .112-.120 2.84-3.05 .135-.143 3.43-3.63 .178-.186 4.52-4.72
A Dia.
Description
A Dia. .388 [9.86]
.913 [23.19]
80
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors Assembly Tools MARC 43, 53 and 63 Series Connectors
Removal Tool -- None required. Crimp Tools -- Turret style tool (M22520/1-01 and TH88) MICRODOT Part Number 010-0080-0000 -- Crimps all power contacts. Locator Style Tool -- MICRODOT Part Number 010-0070-0000 with locators.
Contact Size 22 22 16
Wire Size 22, 24 26 16, 18
Locator 010-0072-0000 010-0087-0000 010-0075-0000
For MARC 43 Series Connector Crimp Coax Contacts Use 010-0132-0000 & 010-0169-0000.
MARC 73 Series Connectors
Description Crimp Tool w/ Locator Crimp Tool Only Locator Only
Part No. 010-3008-0000 010-3009-0000 M22520/2-01 010-3010-0000
Description Crimp Tool w/ Locator Crimp Tool Only Locator Only
Part No. 010-3002-0000 010-0190-0000 010-3007-0000
3
Circular Connectors
81
Catalog 1308638 Revised 8-05 www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425
South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MARC 73 Series Connectors Service and Performance Data
MARC 73 Series Connectors meet or exceed the performance requirements of specification MIL-C-38999. Your sales representative or field engineer can supply detailed, cross-reference information. MARC 73 Series Connectors meet the following selected test parameters as specified below: DESCRIPTION Contact Retention TEST REQUIREMENTS Contacts are to withstand 10 lbs [44.48 N] axial load without axial displacement in excess of 0.012 [0.30] or damage to contacts or inserts when the axial load is applied to the mating end of the contacts in unmated plugs and receptacles at a rate of approximately 1 lb/sec. [4.45 N]. The potential drop across normally mated contacts shall not exceed 25 mv under room ambient and high temperature service conditions when measured as specified in MIL C-39029 with maximum rated current. No evidence of dielectric breakdown or flashover when mated and unmated plugs are subjected to 645 and 180 volts RMS, respectively, at altitudes up to 70,000 feet [21,336 m] and 1000 volts RMS at sea level. Insulation resistance of mated plugs and receptacles shall be 5000 megohms, minimum, at room temperature and 1000 megohms, minimum, at 257F [+125C] when measured per MIL-STD 202, Method 302, Test Condition B. Plugs and receptacles shall withstand up to 500 cycles of engagement and separation without detrimental damage to plugs or receptacles or not satisfying subsequent tests. Mating and unmating forces shall not exceed 27 Ibs [120.10 N] maximum, (15 shell size) after fully wired plugs and receptacles are immersed for 20 hours, each, in hydraulic fluid (MIL-H-5606) and high temperature lubricating oil (MIL-L-9236) followed by a one-hour dry. Mated connectors shall show no circuit interruptions greater than one microsecond during 12 hours vibration to include six sweeps in each axis at extreme temperatures of -85F [-65C] and 257F [+125C] per MIL-STD-202, Method 204, Test Condition D. Post inspection shall show no detrimental cracking, breaking, or loosening of parts. The insulation resistance of mated connectors shall exceed 1000 megohms after subjection to moisture resistance testing per MIL-STD-202, Method 106. The insulation resistance of wired and mated connectors shall be 5000 megohms, minimum, and there shall be no flashover or breakdown at test voltage of 1000 volts RMS after the third cycle and while immersed in 5% salt water solution at 68F [20C] and room ambient pressure at 68F [20C]. Unmated plugs and receptacles shall show no excessive corrosion which would detrimentally affect the electrical and mechanical performance of the connectors after subjection to 24 hours exposure to salt spray atmosphere per MIL-STD-202, Method 101.
Contact Resistance
Dielectric Withstanding Voltage, Altitude and Sea Level Insulation Resistance, Room and High Temp. Coupling and Uncoupling
Fluid Immersion
Sweep Vibration, Mated
Moisture Resistance Altitude Breathing
Salt Spray
82
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MARC 73 Series Connectors (Continued) Service and Performance Data
I. Electrical -- Electrical Ratings
Contact Size 22 AWG
1
Current Rating (Amperes, Max., 81F [+27C]) 5
Dielectric Withstanding Voltage (RMS) 1000
Working Voltage 110,000 Ft. Alt.1 Sea Level 750 300
Contact Resistance (Millivolts, Max.) 8
110,000 ft = 33,528 m
Wire Range Accommodations
Wire Barrel Size Wire Size (AWG) 26 22 AWG 24 22 O.D. of Finished Wire Range Nominal .029 Min. 0.74 -- .044 1.12 Max. .031 Nom. 0.79 .036 Nom. 0.91 .042 1.07 Nom. Wire Spec. MIL-W-16878 Type "E" or "ET" Type "ET" Type "ET"
II. Mechanical -- Durability: 500 Cycles Mate/Unmate. Coupling/Uncoupling Forces and Tightening Torques:
Shell Size 9 12 15 18 Coupling/ Uncoupling Force (In-Lbs.) Max. 10 [44.48] 15 [66.72] 22 [97.86] 28 [124.55] Tightening Torque (In-Lbs.) Mounting Nut Retaining Nut 20 [2.26 N] Max. 20 [2.26 N] Max. 20 [2.26 N] Max. 20 [2.26 N] Max. 30-45 [3.39 Nm - 5.08 Nm] 40-55 [4.52 Nm - 6.21 Nm] 55-70 [6.21 Nm - 7.91 Nm] 70-85 [7.91 Nm - 9.60 Nm]
Operating Temperature: -67F to 257F [-55C to +125C]. Connector Mated Length: 2.217 [56.31] Max.
Part Number and Ordering Information
MARC 73 Series Connector part numbers indicate size, shape, insert layout, type of seal, style of contact and polarization.
Circular Connectors
MD73
06
E
15
91
P
N
(***)
Modification Designator when applicable
Series -- MD73 Single hole mntng. receptacle Line cord receptacle Box mntng. receptacle Straight plug, bayonet quick disconnect 00
Polarizing position N, 1, 2, 3, 4, etc. . . . P -- Pin power contact S -- Socket power contact Insert arrangement number Shell Size -- O.D. of receptacle barrel to nearest .062 [19.05] inch E -- Environmentally sealed
01 02 06
Notes: Pin contacts in plug; socket contacts in receptacle. If P or S does not appear in the numbering system, no contacts will be supplied with order (order separately).
3
Contact Arrangements1
Shell Size 9
Shell Size 12
Shell Size 15
Insert Arrangement 2 Number of Contacts Contact Size
9-273 27 22 AWG
12-613 61 22 AWG
15-913 91 22 AWG
1 2 3
Views shown are front face views of receptacles. Front face view of plug is mirror image of that shown. Arrow ( ) indicates insert top or vertical position in relation to top or vertical position of housing. The 22 AWG contact arrangements will accommodate MIL-W-16878 Type ET, 22, 24, 26 AWG wire. Contact spacing is on 0.065 [1.65] centers.
83
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MARC 73 Series Connectors (Continued) Configurations
MD73-06E Straight Plug, Bayonet Coupling, Environmental and Non-Environmental (Mates with Receptacles 02, 00 and 01)
A Master Polarizing Keyway
B C
.093 Max. [2.36]
Shell Size 9 12 15 18
A .813 20.65 1.000 25.40 1.125 28.58 1.594 40.49
Dimensions B (Max.) 1.000 25.40 1.000 25.40 1.000 25.40 1.000 25.40
C (Max.) 1.288 32.72 1.288 32.72 1.288 32.72 1.288 32.72
MD73-02E Receptacle, Box Mounting, Environmental and NonEnvironmental (Mates with Plug, Type 06)
Master Polarizing Key
.110-.130 Dia. [2.79-3.30] 4 Holes
B Typ.
C Hex.
A Typ.
.052-.072 [1.32-1.83] 1.360 [34.54]
.093 Max. [2.36] .065-.085 [1.65-2.16]
D
Panel Cutout
.375 [9.53] Max. Panel Thickness Shell Size 9 12 15 18 Dimensions C .562 14.27 .75 19.05 .875 22.23 1.125 28.58
A .875 22.23 1.000 25.40 1.125 28.58 1.344 34.14
B .662 16.81 .786 19.96 .906 23.01 1.062 26.97
D .693-.697 17.60-17.70 .881-.885 22.38-22.48 1.006-1.011 25.55-25.68 1.250-1.260 31.75-32.00
MD73-00E Receptacle, Single Hole Mounting, Environmental and Non-Environmental (Mates with Plug, Type 06)
Master Polarizing Key
.125 [3.18]
B Hex.
A Hex.
F Hex. .093 Max. [2.36]
D
T Thread
C
E
Panel Cutout Shell Size 9 12 15 18 Dimensions D .669-.673 16.99-17.09 .850-.856 21.59-21.74 .975-.979 24.77-24.87 1.212-1.216 30.78-30.89
A .813 20.65 1.000 25.40 1.125 28.58 1.625 41.28
B .75 19.05 .937 23.80 1.062 26.97 1.375 34.93
C 1.360 34.54 1.360 34.54 1.360 34.54 1.360 34.54
E .693-.697 17.60-17.70 .881-.885 22.38-22.48 1.006-1.010 25.55-25.65 1.251-1.255 31.78-31.88
F .562 14.27 .75 19.05 .875 22.23 1.125 28.58
T (Class 2A) 11/16-32UN 7/8-28UN 1-28UN 1-1/4-28UN
84
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MARC 73 Series Connectors (Continued) Configurations (Continued)
MD73-01E Receptacle, Line Cord, Environmental (Mates with Plug, Type 06)
B C Hex. Master Polarizing Key
A
.093 Max. [2.36]
Shell Size 9 12 15 18
A 1.360 34.54 1.360 34.54 1.360 34.54 1.360 34.54
Dimensions B (Max.) .703 17.86 .891 20.57 1.016 25.81 1.203 30.56
C .562 14.27 .75 19.05 .875 22.23 1.125 28.58
Accessories
Cable Clamps
T Thread
B .225 Max. [5.72]
.156 [3.96] A
Circular Connectors
Shell Size 9 12 15 18
Clamp Part No. 086-0341-00N1 086-0342-00N1 086-0343-00N1 086-0344-00N1
A .704 17.88 .773 19.63 .829 21.06 .890 22.61
B .750 19.05 .932 23.67 1.078 27.38 1.250 31.75
T Thd. 2A 1/2-20 UNF 11/16-24 UNEF 13/16-20 UNEF 1-28 UN
.225 Max. [5.72]
C .156 [3.96]
3
B D A
T Thread
Shell Size 9 12 15 18
Clamp Part No. 086-0337-00N1 086-0338-00N1 086-0339-00N1 086-0340-00N1
A .737 18.72 .913 23.19 1.048 26.62 1.225 31.12
B (Max.) .600 15.24 .785 19.94 .962 24.43 1.185 30.10
C (Max.) 1.100 27.94 1.250 31.75 1.469 37.31 1.550 39.37
D .879 22.33 1.067 27.10 1.233 31.32 1.550 39.37
T Thd. 2A 1/2-20 UNF 11/16-24 UNEF 13/16-20 UNEF 1-28 UN
85
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MARC 73 Series Connectors (Continued) Accessories (Continued)
Contacts Twist pin -- 22 Pins and Sockets
Copper alloy plated .000050 [0.00127] gold over copper flash per MIL-G-45204, Type II Rating -- 5 amps Contact Resistance -- .008 ohms max.
.415 [10.54] .250 [6.35] .680 [17.27]
.042 Dia. [1.07]
.250 [6.35]
.030 Dia. [0.76]
.034 Dia. [0.86]
.050 Dia. [1.27]
.035 Dia. [0.89]
.030-.032 Dia. [0.76-0.81]
.050 Dia. [1.27]
Part Number 096-0526-0000
Part Number 096-0626-0001
Engineering/Separation Forces -- 6 oz. [1.67 N] max. / .502 [.139 N] min. Durability -- 2000 cycles
Contact Cavity Sealing Plugs
.800 [20.32] .437 [11.10]
.264 [6.71]
.035-.041 [0.89-1.04]
.264 [6.70]
.036-.044 [0.91-1.10]
Part Number 086-0331-0000
Part Number 086-0330-0000
Contact Size 22 AWG
Sealing Plug 086-0331-0000
Filler Plug 086-0330-0000
Note: Sealing plug occupies insert and grommet cavities. Filler plug occupies insert cavity only.
86
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MQR Series -- Microminiature Circular Connectors
MQR stands for MICRODOT Quick Release. This line of circular quick disconnect connectors has metal shells with push-pull couplings which provide a positive connection for rugged environmental use. The MQR series is specified for cable-to-cable and cableto-panel applications. The plug connector side contains socket contacts. The receptacle connector side contains pin contacts. Because the pin contact is "active" or "live", the pins require the physical protection that the receptacle side offers. (Similar to a "protected" or "shrouded" header.) While there is no optional hardware for the MQR series, the receptacles incorporate a standard jam nut to tighten the connector down to the board or panel. MQR connectors are manufactured to the performance specifications of MIL-DTL-83513.
How to Specify/ Ordering Code
S -- Solder pot X -- Special, Does not fit description. MQR A 37 P 6 A 1 18.0 Length in Inches (Min.) Insulation Color or Finish
Connector Series Shell, Material & Finish
A -- Aluminum, Electroless Nickel Finish B -- Brass, Sulfamate Nickel Finish 1 -- All white 6 -- Bare (unfinished) 2 -- All yellow 7 -- Color coded per MIL-STD-681, System I 3 -- All gray 9 -- 10 Solid color repeating (starts with black) 4 -- Gold plated 5 -- Tin dipped gold plated
Circular Connectors
Number of Contacts**
7, 19, 37*
Wire Type
Per MIL-W-16878
Shell
P -- Plug (Socket Contact) F -- Receptacle, Front Panel Mount (Pin Contact) R -- Receptacle, Rear Panel Mount (Pin Contact)
{
*uses twist pin contacts ** Other non-standard sizes are also available, contact Tyco Electronics for details.
A -- Type E, 7 strand B -- Type ET, 7 strand C -- Type E, 19 strand D -- Type ET, 19 strand F -- 7 strand per MIL-W-22759/11 (28 AWG only) G -- 19 strand per MIL-C-22759/11 26 AWG, 24 AWG L -- Copper, solid Q -- Stranded per MIL-W-22759/33
Wire Size
4 -- 24 AWG 5 -- 25 AWG 6 -- 26 AWG 8 -- 28 AWG 0 -- 30 AWG
3
Front Panel Mount (MQR Receptacle)
Size 7 19 37 A (Hex) .500 12.7 .625 15.88 .812 20.62 B (Min.) .361 9.17 .477 12.16 .722 18.39 Dimensions O C (Min.) .376 9.55 .501 12.73 .751 19.07 D Thd. 3/8-32 UNEF-2A 1/2-28 UNEF-2A 3/4-20 UNEF-2A
Key
A Hex.
D Thd. .400 [10.16]
B Min.
OC Min.
Mounting Hole For Front Panel Mount
Front Panel Mount (19 Position Shown)
87
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MQR Series -- Microminiature Circular Connectors (Continued)
Rear Panel Mount (MQR Receptacle)
Size 7 19 37 A (Hex) .500 12.7 .687 17.45 .812 20.62 B (Min.) .422 10.72 .531 13.49 .722 18.39 Dimensions O C (Min.) .440 11.18 .564 14.33 .751 19.07 D Thd. 7/16-28 UNEF-2A 9/16-24 UNEF-2A 3/4-20 UNEF-2A
.036 .005 Typ. [0.91 0.13] D Thd. A Hex. .0433 Typ. [1.10] .025 Typ. [0.64] .050 Typ. [1.27] Key
.250 [6.35] L Min.
B Min.
OC Min.
Mounting Hole For Rear Panel Mount
Rear Panel Mount (19 Position Shown)
Circular MQR Series Quick Release Receptacle
7 Position (Stamped Pin)
1 2 3 4 5 7 6
19 Position (Stamped Pin)
2 1 4 8 13 17 18 19 3 7 12 16 10 16 23 29 5
37 Position (Twist Pin)
2 1 3 4 9 15 22 28 33 34 35 36 37
Circular MQR Series Quick Release Plug
.130-.144 Typ. [3.30-3.66] .025 Typ. [0.64]
.050 Typ. [1.27] Keyway
MQR Plug
Size 7 19 37 Dimensions OB OA .375 .300 9.53 7.62 .400 .475 12.07 10.16 .750 .630 19.05 16.00
OA OB .795 [20.19] .0433 Typ. [1.10]
L Min.
Plug (19 Position Shown)
7 Position
1 7 6 5 4 2 3 7 12 16
19 Position
2 3 1 4 8 13 19 18 17 15 22 28 33 9
37 Position
3 4 2 1 5 10 16 23 29 37 36 35 34
88
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MTC Series -- Microminiature Circular Connectors How to Specify/ Ordering Code
X -- Special, Does not fit description. MTC MICRODOT Threaded Coupling Series Insulation Color or Finish Number of Contacts
9, 19 1 -- All white 6 -- Bare (unfinished) 2 -- All yellow 7 -- Color coded per MIL-STS-681, System I 3 -- All gray 9 -- 10 Solid color repeating (starts with black) 4 -- Gold plated 5 -- Tin dipped gold plated
19
P
6
A
1
18.0 Length in Inches (Min.)
Contact Type
P -- Twist Pin (Plug) S -- Socket (Receptacle)
Wire Type
Per MIL-W-16878
{
A -- Type E, 7 strand B -- Type ET, 7 strand C -- Type E, 19 strand D -- Type ET, 19 strand F -- 7 strand per MIL-W-22759/11 (28 AWG only)
G -- 19 strand per MIL-C-22759/11 (26 AWG and 24 AWG only) L -- Copper, solid Q -- Stranded per MIL-W-22759/33
Wire Size
4 -- 24 AWG 5 -- 25 AWG 6 -- 26 AWG 8 -- 28 AWG 0 -- 30 AWG
Material and Finish
Shell -- Aluminum, nickel plated Contact -- Copper alloy, gold plated Insulator -- RYTON
MTC Series Plug
Size 9 19 OA .227 5.77 .308 7.82 Dimensions OB .456 11.58 .545 13.84 C Thd. M10 x 0.75 19.05 M12 x 1 25.40
Circular Connectors
Key
3
OB .036 .005 Typ. [0.91 0.13] OA
9 Position
1
19 Position
2 3 3 4 7 12 1 4 8 13 19 18 17
9 8 7
C Thd. .800 [20.32]
2
16
6
5
L Min.
MTC Series Plug (19 Position Shown)
89
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Circular Connectors MTC Series -- Microminiature Circular Connectors (Continued)
MTC Series Receptacle
Size 9 19 OA .562 14.27 .625 15.88 B Hex. .500 12.70 .625 15.88 Dimensions C Thd. M10 x 0.75 19.05 M12 x 1 25.40 D Min. .370 9.40 .445 11.30 O E Min. .394 10.01 .474 12.04
Keyway
9 Position
1
19 Position
2 1 8 7 4 8 3 7 12 16 17 18 19
2 3 4 5
B Hex.
9
13
6
C Thd.
.900 [22.86]
.130-.144 Typ. [3.30-3.66]
OE
D
L Min.
Panel Cut Out
OA
MTC Series Receptacle (19 Position Shown)
90
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Introduction Product Facts
I
Designed to accept 50, 70 and 93 ohm miniature coaxial cables Three types of connectors: Screw-on Series, Slide-on Series and Quick-Connect Series Temperature range -- -85F to +257F [-65C to +125C] (with neoprene gasket or bend relief cap) -80F to 392F [-62C to +200C] (with silicone gasket or bend relief cap) Dielectric Withstanding Voltage -- 1000 volts RMS at sea level Contact Resistance -- 3 milliohms max., D.C. Captive Contacts -- Terminated connector contacts captivated from movement in both directions
I
I
I
I I
MICRODOT Standard Coaxial Connectors are designed to accept 50, 70, and 93 Ohm miniature coaxial cables. These connectors are available as Screw-On Series, Slide-On Series, or Quick-Connect Series. The Screw-On Series is intermateable with
the Gold Plated Crimp Style Coaxial Connector Series and offers the dependability of a threaded coupling. For enhanced safety, choose connectors with wire holes. Choose Slide-On Series for the fastest, most convenient mating and unmating.
The Quick-Connect Series offers the convenience of Slide-On coupling with added retention provided by a snap ring located on the jack/receptacle side. Consult Tyco Electronics for special cable accommodations and mounting features.
4
91
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors
Coaxial Connectors Standard Connectors Performance Data Summary For Standard Connectors
Mechanical
Captive Contacts -- Terminated connector contacts captivated from movement in both directions. Cable Retention -- 50 Ohm connectors, 15 lb. min.1 70 Ohm connectors, 25 lb. min.1 93 Ohm connectors, 35 lb. min.1 Recommended Coupling Torque (Threaded Interface) -- 8 inch/pounds max. Recommended Receptacle Mounting Torque (All Series) -- 8 inch/pounds max. Unmating Force (Slide-On Series) -- 1-7 pounds. Contact Protection (Unmated) -- Pin contact protected by coupling nut (threaded series)2 or by housing (QuickConnect and Slide-On Series). Socket protected by insulator and housing. Vibration3,4 -- MIL-STD-202, Method 204, Test condition B (15 G peak). No physical damage or electrical discontinuities in excess of 1 microsecond. Shock3,4 -- MIL-STD-202, Method 213, Test Condition H. No physical damage or electrical discontinuity after shock. Thermal Shock -- MIL-STD-202, Method 107, Test Condition B. Moisture Resistance3 -- MIL-STD202, Method 106. Salt Spray3 -- MIL-STD-202, Method 101, Test Condition B (48 hours). Socket Contact (Jacks & Receptacles) -- Beryllium Copper per ASTM-B-196. Bend Relief Caps (Plugs & Jacks) -- Neoprene or Silicone Rubber per ZZ-R-765. Gaskets (Jacks & Receptacles) -- Neoprene or Silicone Rubber per ZZ-R-765. Lockwasher -- #425 Bronze Alloy.
Plating
Contacts -- Gold per MIL-G-45204, Type II, Grade C, Class 1. Housing, Nut, Jerk Ring, Lockwasher -- Silver per QQ-S-365, Type II, Grade A, .0002 [.005] min.
Notes: 1 Termination to cables with foamed dielectrics excluded. Straight connector jerk rings must be soldered to cable shield. 2 Pin protector required. See individual connector specifications. 3 Screw-On Series, threaded interface. 4 Tyco Electronics recommends the use of safety wired connectors in vibration and shock environment. See individual specifications for connectors with safety wire holes. 5 VSWR is a system specification. Where performance is critical, purchase Tyco Electronics cable assemblies with Screw-On or Quick-Connect Series connectors and specify VSWR testing and mating connector part number.
Electrical
Impedance -- Designed to be compatible with 50, 70, or 93 Ohm miniature coaxial cable. Dielectric Withstanding Voltage -- 1000 volts RMS at sea level. Contact Resistance -- 3 milliohms max., D.C. Current Capacity -- 3 amps, D.C. Insulation Resistance -- 5 x 103 Megohms min. @ 500 volts D.C. Voltage Standing Wave Ratio5 (VSWR) -- Typical 50 Ohm series, 1.2 max. to 2 GHz.
Assembly Methods
Straight Plugs & Jacks -- Cable Inner Conductor: Soldered to contact. Cable Shield: Crimped to jerk ring (solder optional). Angle Plugs -- Cable Inner Conductor: Soldered to contact. Cable Shield: Soldered to ring & housing.
Environmental
Temperature Range (Continuous Service) -- -85F to +257F [-65C to +125C] (with Neoprene gasket or bend relief cap). -80F to 392F [-62C to +200C] (with Silicone gasket or bend relief cap).
Materials
Housing, Nut, Jerk Ring -- Brass per ASTM-B-16. Insulator -- TEFLON per ASTM-D-1710. Pin Contact (Plugs) -- Brass per ASTM-B-16.
92
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Standard Connectors -- Screw-On Series
See page 128 for mating options.
Jack
S-50 Ohm Series 031-0034-0001 051-0467-0001 S-70 Ohm Series 031-0036-0001 031-0090-0001 S-93 Ohm Series 031-0037-0001 031-0088-0001
Plug
S-50 Ohm Series 032-0021-0001 032-0023-0001 032-0025-0001 032-0033-0001 032-0097-0001 032-0098-0001 032-0155-0001 032-0156-0001 052-0213-0001 052-0235-0001 052-0235-0003 052-0370-0001 052-0542-0001 S-70 Ohm Series 032-0010-0001 032-0022-0001 032-0067-0001 032-0078-0001 032-0222-0001 052-0092-0001 S-93 Ohm Series 032-0011-0001 032-0017-0001 032-0066-0001 032-0071-0001 032-0092-0001 032-0099-0001 052-0200-0001
Bulkhead Jack
S-50 Ohm Series 031-0033-0001 S-70 Ohm Series 031-0048-0001 S-93 Ohm Series 031-0032-0001 031-0089-0001
Receptacle
S-50 Ohm Series 031-0050-0001 051-0318-0001 S-70 Ohm Series 031-0051-0001 S-93 Ohm Series 031-0052-0001
Right-Angle Plug
S-50 Ohm Series 032-0015-0001 052-0204-0001 052-0215-0001 052-0337-0001 S-70 Ohm Series 032-0013-0001 052-0299-0001 052-0379-0001 S-93 Ohm Series 032-0014-0001 032-0068-0001 032-0153-0001 052-0207-0001 052-0298-0001 052-0304-0022
Coaxial Connectors
Receptacle
S-50 Ohm Series 031-0001-0001 031-0001-0003 031-0002-0001 031-0003-0001 031-0024-0001 051-0125-0001 S-70 Ohm Series 031-0017-0001 031-0018-0001 S-93 Ohm Series 031-0016-0001 031-0019-0001 031-0046-0001
4
Printed Circuit Receptacle
S-50 Ohm Series 031-0059-0001 031-0062-0001 051-0450-0001 S-70 Ohm Series 031-0069-0001 S-93 Ohm Series 031-0067-0001 031-0080-0001
Right-Angle Printed Circuit Receptacle
S-50 Ohm Series 031-0061-0001 051-0459-0001 S-70 Ohm Series 031-0072-0001 S-93 Ohm Series 031-0073-0001
93
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Standard Connectors -- Screw-On Series (Continued) Plugs
A
S-50, 70 & 93
B
.030-.033 Pin [.762-.838]
Pin Protector
Part No.
Dim. A
Dim. B
Cable Jacket Max.
Special Features
Instruction Sheet No.
Former MICRODOT I.S. No.
Assembly Tool
S-50 Series (50 Ohm) .190 [4.83] -32 UNF-2B Thread .745 .230 032-0021-0001 5.84 Dia. 18.92 .230 .745 032-0023-0001 5.84 Dia. 18.92 .230 .745 032-0025-0001 18.92 5.84 Dia. .745 .230 Dia. 032-0033-0001 5.84 18.92 .250 .745 032-0097-0001 6.35 Hex. 18.92 .250 .745 032-0098-0001 18.92 6.35 Hex. .700 .250 Hex. 032-0155-0001 17.78 6.35 .700 .250 Dia. 032-0156-0001 17.78 6.35 .745 .250 Hex. 052-0213-0001 18.92 6.35 .745 .250 Hex. 052-0235-0001 18.92 6.35 .745 .250 Hex. 052-0235-0003 18.92 6.35 .745 .250 Hex. 052-0370-0001 18.92 6.35 .745 .250 Hex. 052-0542-0001 18.92 6.35 S-70 Series (70 Ohm) .216 [5.49] -32 UNEF-2B Thread .760 .255 Dia. 032-0010-0001 19.30 6.48 .760 .255 Dia. 032-0022-0001 19.30 6.48 .755 .255 032-0067-0001 19.18 6.48 Dia. .755 .255 032-0078-0001 19.18 6.48 Dia. .760 .281 Hex. 032-0222-0001 19.30 7.14 .255 .760 052-0092-0001 19.30 6.48 Dia. S-93 Series (93 Ohm) .250 [6.35] -32 UNEF-2B Thread .320 .760 032-0011-0001 19.30 8.13 Dia. .760 .320 Dia. 032-0017-0001 19.30 8.13 .950 .350 Dia. 032-0066-0001 24.13 8.89 .760 .320 Dia. 032-0071-0001 19.30 8.13 .320 .760 032-0092-0001 19.30 8.13 Dia. .760 .312 032-0099-0001 7.92 Hex. 19.30 .312 .760 052-0200-0001 19.30 7.92 Hex.
1 2
.087 2.21 .087 2.21 .093 2.36 .093 2.36 .087 2.21 .087 2.21 .088 2.24 .088 2.24 .087 2.21 .087 2.21 .087 2.21 .093 2.36 .087 2.21 .093 2.36 .093 2.36 .108 2.74 .108 2.74 .093 2.36 .093 2.36 .134 3.40 .134 3.40 .154 3.91 .134 3.40 .155 3.94 .134 3.40 .134 3.40
1
Solderless Assembly
408-08521 408-08522 408-08521 408-08522 408-08521 408-08522 408-08522 408-08522 408-08521 408-08522 408-08522 408-08522 408-08522
RF-ASMB-88 RF-ASMB-89 RF-ASMB-88 RF-ASMB-89 RF-ASMB-88 RF-ASMB-89 RF-ASMB-89 RF-ASMB-89 RF-ASMB-88 RF-ASMB-89 RF-ASMB-89 RF-ASMB-89 RF-ASMB-89
010-0003-0000 010-0003-0000 010-0003-0000 010-0003-0000 010-0003-0000 010-0003-0000 010-0003-0000 010-0003-0000 010-0003-0000 010-0003-0000 010-0003-0000 010-0003-0000 010-0003-0000
1
1
Solderless Assembly
1
1
Solderless Assembly, Hex Nut
Hex Nut Hex Nut, .187 [4.75] Hex Cable Clamp Nut 1, 2 .187 [4.75] Hex Cable Clamp Nut 1 Solderless, Hex Nut w/ Safety Wire Holes, .021 [0.53] Wire Max.
1, 2 1, 2
Hex Nut
Hex Nut w/ Safety Wire Holes, .021 [0.53] Wire Max. 1 Hex Nut, Designed for Dual Shield Cable
1, 2 1
Hex Nut
1
Solderless Assembly
408-08521 408-08525 408-08522 408-08521 408-08525 408-08525
RF-ASMB-88 RF-ASMB-95 RF-ASMB-89 RF-ASMB-88 RF-ASMB-95 RF-ASMB-95
010-0004-0000 010-0004-0000 010-0035-0000 010-0035-0000 010-0004-0000 010-0004-0000
1
1
1
Solderless Assembly Hex Nut w/ Safety Wire Holes, .014 [0.35] Wire Max.
1
2
1
Solderless Assembly
408-08521 408-08525 408-08523 408-08525 408-08525 408-08525 408-08525
RF-ASMB-88 RF-ASMB-95 RF-ASMB-90 RF-ASMB-95 RF-ASMB-95 RF-ASMB-95 RF-ASMB-95
010-0005-0000 010-0005-0000 -- 010-0005-0000 010-0044-0000 010-0005-0000 010-0005-0000
1
1
Silicone Bend Relief Cap
1
Cable Inner Conductor, .031 [0.78] Max.
1
1
Hex Nut Hex Nut w/ Safety Wire Holes, .015 [0.38] Wire Max.
1
Pin protected. Hole in ferrule permits soldering to clamp ring and shield for increased cable pullout strength.
94
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Standard Connectors -- Screw-On Series (Continued) Right-Angle Plugs
S-50, 70 & 93
B
C
ANGLE PLUG
A
Part No.
Dim. A
Dim. B
Dim. C
Cable Jacket Max. .092 2.34 .092 2.34 .092 2.34 .111 2.82 .111 2.82 .111 2.82 .111 2.82 .134 3.40 .155 3.94 .155 3.94 .134 3.40 .134 3.40
Special Features
Instruction Sheet No.
Former MICRODOT I.S. No.
Assembly Tool
S-50 Series (50 Ohm) .190 [4.83] -32 UNF-2B Thread .735 .225 Dia. 032-0015-0001 18.67 5.72 .735 .250 Hex. 052-0204-0001 18.67 6.35 052-0215-0001 052-0337-0001 .735 18.67 .250 6.35 Hex.
.570 14.48 .570 14.48 .570 14.48 .570 14.48 .570 14.48 .570 14.48 .570 14.48 .630 16.00 .630 16.00 .630 16.00 .630 16.00 .630 16.00
408-08520 Hex Nut Hex Nut w/ Safety Wire Holes, .021 [.533] Wire Max. Dual Shield Cable 408-08520 408-08520 408-08520
RF-ASMB-87 RF-ASMB-87 RF-ASMB-87 RF-ASMB-87
010-0016-0000 010-0016-0000 010-0016-0000 010-0016-0000
.225 .745 18.92 5.72 Dia. S-70 Series (70 Ohm) .216 [5.49] -32 UNEF-2B Thread .745 .255 Dia. 032-0013-0001 18.92 6.48 052-0299-0001 052-0379-0001 .745 18.92 .281 7.14 Hex.
408-08520 Hex Nut w/ Safety Wire Holes, .014 [.355] Wire Max. Hex Nut 408-08520 408-08520
RF-ASMB-87 RF-ASMB-87 RF-ASMB-87
010-0016-0000 010-0016-0000 010-0016-0000
.745 .281 Hex. 18.92 7.14 S-93 Series (93 Ohm) .250 [6.35] -32 UNEF-2B Thread .745 .320 Dia. 032-0014-0001 18.92 8.13 .745 .320 Dia. 032-0068-0001 18.92 8.13 .745 .312 Hex. 032-0153-0001 18.92 7.92 .745 .312 Hex. 052-0207-0001 18.92 7.92 052-0298-0001 .745 18.92 .312 Hex. 7.92
408-08520 408-08520 Hex Nut Hex Nut Hex Nut w/ Safety Wire Holes, .015 [.381] Wire Max. Hex Nut w/ Safety Wire Holes, .015 [.381] Wire Max., Silicone Bend Relief Cap 408-08520 408-08520 408-08520
RF-ASMB-87 RF-ASMB-87 RF-ASMB-87 RF-ASMB-87 RF-ASMB-87
010-0017-0000 010-0017-0000 010-0017-0000 010-0017-0000 010-0017-0000
Coaxial Connectors
052-0304-0022
.745 18.92
.312 Hex. 7.92
.630 16.00
.155 3.94
408-08520
RF-ASMB-87
010-0017-0000
4
95
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Standard Connectors -- Screw-On Series (Continued) Jacks
S-50, 70 & 93
.400 [10.16] B Max. Panel
A
OB
.375 Hex. [9.52]
.375 Hex. [9.52]
.292 Min. [7.42]
Mounting Nut
Lock Washer
O .313 Min. [7.95]
Fig. 1
Fig. 2
Mounting Hole
Part No.
Fig.
Dim. A
Dim. B
Cable Jacket Max. .088 2.24 .087 2.21 .079 2.01 .093 2.36 .093 2.36 .109 2.77 .134 3.40 .134 3.40 .154 3.91 .154 3.91
Special Features
Instruction Sheet No.
Former MICRODOT I.S. No.
Assembly Tool
S-50 Series (50 Ohm) .190 [4.83] -32 UNF-2A Thread .870 2 031-0033-0001 22.10 .750 031-0034-0001 1 19.05 .720 051-0467-0001 1 18.30 S-70 Series (70 Ohm) .216 [5.49] -32 UNEF-2A Thread .760 031-0036-0001 1 19.30 .880 031-0048-0001 2 22.35 .760 031-0090-0001 1 19.30 S-93 Series (93 Ohm) .250 [6.35] -32 UNEF-2A Thread .880 031-0032-0001 2 22.35 .760 031-0037-0001 1 19.30 1.000 031-0088-0001 1 25.40 .750 031-0089-0001 2 19.05
.140 3.56 .235 5.97 .235 5.97 .255 6.48 .140 3.56 .255 6.48 .155 3.94 .320 8.13 .320 8.13 .140 3.56
408-08522 408-08522 Hex Collet Cable Clamp 408-08522
RF-ASMB-89 RF-ASMB-89 RF-ASMB-89
010-0003-0000 010-0003-0000 010-0003-0000
408-08522 408-08525 408-08522
RF-ASMB-89 RF-ASMB-95 RF-ASMB-89
010-0004-0000 010-0004-0000 010-0035-0000
408-08525 408-08525 408-08533 No Mounting Flat, Hex Nut Cable Clamp 408-08524
RF-ASMB-95 RF-ASMB-95 RF-ASMB-106 RF-ASMB-92
010-0005-0000 010-0005-0000 -- --
96
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Standard Connectors -- Screw-On Series (Continued) Receptacles
A B Max. Panel
C A B Max. Panel
E O Min.
C
D Hex. Turret Mounting Nut
D Hex.
F Min.
Solder Pot Solder Lug Mounting Nut
Solder Lug
Fig. 1
Fig. 2
Mounting Hole for Fig. 1 & 2
A
A B
B .245 [6.22]
C
D C
.100 .005 [2.54 .127] Typ. O .055 Min. [1.40] Typ.
.200 .005 [5.08 .127] Typ.
O .037 Typ. [.940]
O .037 Typ. [.940]
Fig. 3
Fig. 4
Mounting Pattern for Fig. 3 & 4
Dim. Dim. A B S-50 Series (50 Ohm) .190 [4.83] -32 UNF-2A Thread .515 .080 031-0001-0001 2 13.08 2.03 .510 .110 031-0001-0003 2 12.95 2.80 .515 .150 031-0002-0001 2 13.08 3.81 .255 -- 031-0003-0001 2 6.48 .555 .120 031-0024-0001 2 14.10 3.05 .605 .160 031-0050-0001 1 15.37 4.06 .340 .155 031-0059-0001 3 8.64 3.93 .425 .155 4 031-0061-0001 10.80 3.93 .345 .250 031-0062-0001 3 8.76 6.35 .315 .125 051-0125-0001 2 3.18 8.00 .605 .160 051-0318-0001 1 15.37 4.06 .050 .340 051-0450-0001 3 8.64 1.27 .425 .155 051-0459-0001 4 10.80 3.93 S-70 Series (70 Ohm) .216 [5.49] -32 UNEF-2A Thread .555 .100 031-0017-0001 2 14.10 2.54 .555 .160 031-0018-0001 2 14.10 4.06 .605 .160 031-0051-0001 1 4.06 15.37 .340 .155 3 031-0069-0001 3.94 8.64 .155 .425 4 031-0072-0001 10.80 3.94 Part No. Fig.
Dim. C .187 Wrench Flats 4.75 .187 Wrench Flats 4.75 .187 4.75 Wrench Flats .187 4.75 Wrench Flats .344 Wrench Flats 8.74 .250 6.35 Hex. .330 8.38 Dia. .330 8.38 Dia. .330 8.38 Dia. .187 Wrench Flats 4.75 .250 Hex. 6.35 .330 8.38 Dia. .330 Dia. 8.38 .250 6.35 .250 6.35 .250 6.35 .330 8.38 .330 8.38 Hex. Hex. Hex. Dia. Dia.
Dim. D .250 6.35 .250 6.35 .250 6.35 -- .438 11.13 .250 4.75 -- .480 12.20 -- -- .250 4.75 -- .480 12.20 .281 7.14 .281 7.14 .281 7.14 -- .480 12.20
Dim. E .191 4.85 .191 4.85 .191 4.85 .190 -32 4.83 .345 8.76 .191 4.85 -- -- -- .138 3.50 .191 4.85 -- -- .217 5.51 .217 5.51 .217 5.51 -- --
Dim. F
Special Features
-- -- -- -- -- .173 4.39 -- --
No Mounting Flat No Mounting Flat No Mounting Flat No Nut or Solder Lug, Threads into Panel Housing Isolated by Nylon Insulator
Coaxial Connectors
-- -- .173 4.39 -- -- 3 Outer Legs No Mounting Thread, Solder or Press into Panel w/ Safety Wire Holes, .014 [.355] Wire Max.
-- -- .197 5.00 -- --
No Mounting Flat No Mounting Flat
4
97
Catalog 1308638 Revised 8-05 www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425
South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Standard Connectors -- Screw-On Series (Continued) Receptacles (Continued)
Dim. Dim. A B S-93 Series (93 Ohm) .250 [6.35] -32 UNEF-2A Thread .100 .555 031-0016-0001 2 2.54 14.10 .160 .555 2 031-0019-0001 14.10 2.54 .555 .120 2 031-0046-0001 3.05 3.05 .160 .605 031-0052-0001 1 15.37 2.54 .340 .155 3 031-0067-0001 3.94 8.64 .425 .155 4 031-0073-0001 3.94 10.80 .250 .345 031-0080-0001 3 8.76 6.35 Part No. Fig.
Dim. C .312 7.92 Hex. .312 7.92 Hex. .345 Wrench Flats 8.76 .312 Hex. 7.92 .330 8.38 Dia. .330 8.38 Dia. .330 Dia. 8.38
Dim. D .312 7.92 .312 7.92 .438 11.13 .312 7.92 -- .480 12.20 --
Dim. E .251 6.38 .251 6.38 .345 8.76 .251 6.38 -- -- --
Dim. F
Special Features
-- -- -- .232 5.89 -- -- --
No Mounting Flat No Mounting Flat Housing Isolated by Nylon Insulator
98
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Standard Connectors -- Slide-On Series
All plugs shown below mate with all jacks/receptacles shown below.
Jack
SOS-50 Ohm Series 031-0053-0001 SOS-70 Ohm Series 031-0095-0001 SOS-93 Ohm Series 031-0063-0001 031-0093-0001
Plug
SOS-50 Ohm Series 032-0055-0001 SOS-70 Ohm Series 032-0060-0001 032-0087-0001 SOS-93 Ohm Series 032-0077-0001 032-0084-0001
Bulkhead Jack
SOS-50 Ohm Series 031-0054-0001 SOS-70 Ohm Series SOS-93 Ohm Series 031-0064-0001 031-0094-0001
Right-Angle Plug
SOS-50 Ohm Series 032-0063-0001 SOS-70 Ohm Series 032-0062-0001 SOS-93 Ohm Series 032-0059-0001 032-0083-0001
Receptacle
SOS-50 Ohm Series 031-0049-0001 051-0258-0001 051-0325-0001 SOS-70 Ohm Series 031-0049-0001 051-0258-0001 051-0325-0001 SOS-93 Ohm Series 031-0049-0001 051-0258-0001 051-0325-0001
Coaxial Connectors
Plug Receptacle
SOS-50 Ohm Series 032-0042-0001 052-0061-0001 052-0471-0001 SOS-70 Ohm Series 032-0042-0001 052-0061-0001 052-0471-0001 SOS-93 Ohm Series 032-0042-0001 052-0061-0001 052-0471-0001
Right-Angle Printed Circuit Receptacle
SOS-50 Ohm Series 031-0070-0001 SOS-70 Ohm Series 031-0070-0001 SOS-93 Ohm Series 031-0070-0001
4
Bulkhead Plug
SOS-50 Ohm Series 032-0056-0001 SOS-70 Ohm Series 032-0061-0001 SOS-93 Ohm Series 032-0058-0001
Printed Circuit Receptacle
SOS-50 Ohm Series 031-0060-0001 031-0065-0001 SOS-70 Ohm Series 031-0060-0001 031-0065-0001 SOS-93 Ohm Series 031-0060-0001 031-0065-0001
99
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Standard Connectors -- Slide-On Series (Continued) Straight Plugs
.290 [7.37]
A
A C Max. Panel
B Hex.
OB
D Hex.
Contact Tail Solder Lug Mounting Nut
Fig. 1
A .500 [12.70] C Max. Panel
Fig. 2 Plug Receptacle
OE Min.
Hex.
B Hex.
Mounting Nut
Lock Washer
Fig. 3 Bulkhead Plug
Mounting Hole for Fig. 2 & 3
Part No. SOS-50 Series (50 Ohm) 032-0042-0001 032-0055-0001 032-0056-0001 052-0061-0001 052-0471-0001 SOS-70 Series (70 Ohm) 032-0042-0001 032-0060-0001 032-0061-0001 032-0087-0001 052-0061-0001 052-0471-0001 SOS-93 Series (93 Ohm) 032-0042-0001 032-0058-0001 032-0077-0001 032-0084-0001 052-0061-0001 052-0471-0001
1
Fig.
Dim. A
Dim. B
Dim. C
Dim. D
Dim. E
Cable Max. Jacket
Special Features
Instruction Sheet No.
Former MICRODOT I.S. No.
Assembly Tool
2 1 3 2 2
.705 17.91 .870 22.10 .950 24.13 .750 19.05 .590 14.99 .705 17.91 .880 22.35 .960 24.38 .880 22.35 .750 19.05 .590 14.99 .705 17.91 .960 24.38 .880 22.35 1.06 26.92 .750 19.05 .590 14.99
.250 6.35 .250 6.35 .375 9.53 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .375 9.53 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .375 9.53 .250 6.35 .250 6.35 .250 6.35 .250 6.35
.160 4.06 -- .145 3.68 .160 4.06 .095 2.41 .160 4.06 -- .145 3.68 -- .160 4.06 .095 2.41 .160 4.06 .145 3.68 -- -- .160 4.06 .095 2.41
.281 7.14 -- .375 9.53 .281 7.14 .281 7.14 .281 7.14 -- .375 9.53 -- .281 7.14 .281 7.14 .281 7.14 .375 9.53 -- -- .281 7.14 .281 7.14
.217 5.51 -- .313 7.95 .217 5.51 .217 5.51 .217 5.51 -- .313 7.95 -- .217 5.51 .217 5.51 .217 5.51 .313 7.95 -- -- .217 5.51 .217 5.51
-- .088 2.24 .088 2.24 -- --
Turret Pin Contact Tail
-- 408-08526 408-08526
-- RF-ASMB-97 RF-ASMB-97 -- --
-- 010-0007-0000 010-0007-0000 -- --
Solder Pot Contact Tail Straight Pin Contact Tail1 Turret Pin Contact Tail
-- --
2 1 3 1 2 2
-- .093 2.36 .093 2.36 .108 2.24 -- --
-- 408-08529 408-08526 408-08526
-- RF-ASMB-102 RF-ASMB-97 RF-ASMB-97 -- --
-- 010-0007-0000 010-0007-0000 010-0036-0000 -- --
Solder Pot Contact Tail Straight Pin Contact Tail1 Turret Pin Contact Tail
-- --
2 3 1 1 2 2
-- .134 3.40 .134 3.40 .154 3.91 -- --
-- 408-08529 408-08529 408-08523
-- RF-ASMB-102 RF-ASMB-102 RF-ASMB-90 -- --
-- 010-1008-0000 010-1008-0000 -- -- --
Solder Pot Contact Tail Straight Pin Contact Tail1
-- --
Lockwasher supplied in place of solder lug.
100
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Standard Connectors -- Slide-On Series (Continued) Jacks
A .520 [13.21]
A O .250 [6.35]
.375 Hex. [9.53] .375 Hex. [9.53]
O .313 [7.95] Min.
Mounting Nut
Lock Washer
Fig. 1
Fig. 2
Mounting Hole
Part No. SOS-50 Series (50 Ohm) 031-0053-0001 031-0054-0001 SOS-70 Series (70 Ohm) 031-0095-0001 SOS-93 Series (93 Ohm) 031-0063-0001 031-0064-0001 031-0093-0001 031-0094-0001
Fig.
Dim. A
Cable Jacket Max. .088 2.24 .088 2.24 .108 2.74 .134 3.40 .134 3.40 .154 3.91 .154 3.91
Special Features
Instruction Sheet No.
Former MICRODOT I.S. No.
Assembly Tool
1 2
.800 20.32 .970 24.64 .810 20.57 .810 20.57 .980 24.89 1.100 27.94 .750 19.05
408-08531 408-08531
RF-ASMB-104 RF-ASMB-104
010-0007-0000 010-0007-0000
1
408-08531
RF-ASMB-104
010-0036-0000
1 2 1 2
408-08530 408-08530 .305 [7.75] Dia. Over B.R. Cap Hex Nut Cable Clamp 408-08532 408-08524
RF-ASMB-103 RF-ASMB-103 RF-ASMB-105 RF-ASMB-92
010-1008-0000 010-1008-0000 -- --
Right-Angle Plugs
A
B
Coaxial Connectors
O .250 [6.35]
Part No. SOS-50 Series (50 Ohm) 032-0063-0001 SOS-70 Series (70 Ohm) 032-0062-0001 SOS-93 Series (93 Ohm) 032-0059-0001 032-0083-0001
Dim. A
Dim. B
Cable Max. O.D. .092 2.34 .111 2.82 .134 3.40 .155 3.94
Special Features
Instruction Sheet No.
Former MICRODOT I.S. No.
Assembly Tool
.735 18.67 .745 18.92 .745 18.92 .745 18.92
.545 13.84 .545 13.84 .605 15.37 .605 15.37
408-08520
RF-ASMB-87
010-0016-0000
408-08520
RF-ASMB-87
010-0016-0000
4
101
408-08520 408-08520
RF-ASMB-87 RF-ASMB-87
010-0017-0000 010-0017-0000
Catalog 1308638 Revised 8-05 www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425
South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Standard Connectors -- Slide-On Series (Continued) Receptacles
A B Max. Panel
A B Max. Panel
OE Min.
D Hex. Turret Solder Lug Mounting Nut
Solder Lug
D Hex. Solder Pot Mounting Nut
Fig. 1
Fig. 2
Mounting Hole for Fig. 1 & 2
A
.245 [6.22]
A
B
.100 .005 [2.54 0.13] Typ. O .055 Min. [1.40] Typ.
.200 .005 [5.08 0.13] Typ.
D
C
C
O .037 Typ. [.940]
O .037 Typ. [.940]
Fig. 3
Fig. 4
Mounting Pattern for Fig. 3 & 4
Dim. Dim. A B SOS-50 (50 Ohm), SOS-70 (70 Ohm), & SOS-93 (93 Ohm) Series .715 .160 031-0049-0001 1 18.16 4.06 .340 .155 031-0060-0001 3 8.64 3.94 .340 .250 031-0065-0001 3 8.64 6.35 .425 .155 031-0070-0001 4 10.79 3.94 .715 .160 051-0258-0001 2 18.16 4.06 .570 .140 051-0325-0001 1 14.48 3.56 Part No. Fig.
Dim. C .250 6.35 .330 8.38 .330 8.38 .330 8.38 .250 6.35 .250 6.35
Dim. D .281 7.14 -- -- .540 13.72 .281 7.14 --
Dim. E .217 5.51 -- -- -- .217 5.51 .216-32 5.49 Thd.
Special Features
Hex. Dia. Dia. Dia. Hex. Hex.
No Nut or Lockwasher, Threads into Panel
102
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Standard Connectors -- Quick-Connect Series
Plug
QC-50 Ohm Series 032-0002-0001 032-0030-0001 QC-70 Ohm Series 032-0016-0001 032-0031-0001 032-0079-0001 QC-93 Ohm Series 032-0012-0001 032-0032-0001 032-0072-0001
Jack
QC-50 Ohm Series 031-0038-0001 QC-70 Ohm Series QC-93 Ohm Series 031-0040-0001
Receptacle
QC-50 Ohm Series 031-0057-0001 QC-70 Ohm Series 031-0057-0001 QC-93 Ohm Series 031-0058-0001 031-0085-0001
Right-Angle Plug
QC-50 Ohm Series 032-0026-0001 QC-70 Ohm Series 032-0027-0001 QC-93 Ohm Series 032-0020-0001 052-0228-0001
Coaxial Connectors
Receptacle
QC-50 Ohm Series 031-0004-0001 031-0005-0001 031-0006-0001 051-0586-0001 QC-70 Ohm Series 031-0004-0001 031-0005-0001 031-0006-0001 051-0586-0001 QC-93 Ohm Series 031-0020-0001 031-0021-0001
4
103
Catalog 1308638 Revised 8-05 www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425
South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Standard Connectors -- Quick-Connect Series (Continued) Straight Plugs
A
B
Part No. QC-50 Series (50 Ohm) 032-0002-0001 032-0030-0001 QC-70 Series (70 Ohm) 032-0016-0001 032-0031-0001 032-0079-0001 QC-93 Series (93 Ohm) 032-0012-0001 032-0032-0001 032-0072-0001
Dim. A
Dim. B
Cable Jacket Max. .093 2.36 .093 2.36 .093 2.36 .093 2.36 .108 2.74 .134 3.40 .134 3.40 .154 3.91
Special Features
Instruction Sheet No.
Former MICRODOT I.S. No.
Assembly Tool
.820 20.83 .820 20.83 .830 21.08 .830 21.08 .840 21.34 .845 21.46 .845 21.46 1.050 26.67
.250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .312 7.92 .312 7.92 .312 7.92
Solderless Assembly
408-08527 408-08526
RF-ASMB-100 RF-ASMB-97
010-0007-0000 010-0007-0000
Solderless Assembly
408-08527 408-08529 408-08526
RF-ASMB-100 RF-ASMB-102 RF-ASMB-97
010-0007-0000 010-0007-0000 010-0036-0000
Solderless Assembly
408-08527 408-08529
RF-ASMB-100 RF-ASMB-102 RF-ASMB-90
010-0008-0000 010-0008-0000 --
Mates with 031-0085-0001 Only
408-08523
Right-Angle Plugs
A
C
OB
Part No. QC-50 Series (50 Ohm) 032-0026-0001 QC-70 Series (70 Ohm) 032-0027-0001 QC-93 Series (93 Ohm) 032-0020-0001 052-0228-0001
Dim. A
Dim. B
Dim. C
Cable Jacket Max. .092 2.34 .111 2.82 .134 3.40 .155 3.94
Special Features
Instruction Sheet No.
Former MICRODOT I.S. No.
Assembly Tool
.735 18.67 .745 18.92 .745 18.92 .745 18.92
.250 6.35 .250 6.35 .312 7.92 .312 7.92
.605 15.37 .605 15.37 .635 16.13 .720 18.29
408-08520
RF-ASMB-87
010-0016-0000
408-08520
RF-ASMB-87
010-0016-0000
408-08520 Mates with 031-0085-0001 Only 408-08520
RF-ASMB-87 RF-ASMB-87
010-0017-0000 010-0017-0000
104
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Standard Connectors -- Quick-Connect Series (Continued) Jacks
A B
Part No. QC-50 Series (50 Ohm) 031-0038-0001 QC-93 Series (93 Ohm) 031-0040-0001
Dim. A
Dim. B
Cable Jacket Max. .093 2.36 .134 3.40
Special Features
Instruction Sheet No.
Former MICRODOT I.S. No.
Assembly Tool
.750 19.05 .760 19.30
.250 6.35 .320 8.13
408-08531
RF-ASMB-104
010-0007-0000
408-08530
RF-ASMB-103
010-1009-0000
Receptacles
A B Max. Panel C Hex. D Hex. Turret Solder Lug Mounting Nut
Solder Lug B Max. Panel
A
F Min.
C Hex.
D Hex. Solder Pot Mounting Nut
EO Min.
Fig. 1
Fig. 2
Mounting Hole
Dim. A QC-50 Series (50 Ohm) & QC-70 Series (70 Ohm) .555 031-0004-0001 2 14.10 .555 031-0005-0001 2 14.10 .250 2 031-0006-0001 6.35 .605 031-0057-0001 1 15.37 .555 051-0586-0001 2 14.10 QC-93 Series (93 Ohm) .555 031-0020-0001 2 14.10 .555 031-0021-0001 2 14.10 .605 031-0058-0001 1 15.37 .715 1 031-0085-0001 18.16 Part No. Fig.
Dim. B .095 2.41 .165 4.19 -- .165 4.19 .165 4.19 .095 2.41 .165 4.19 .160 4.06 .165 4.19
Dim. C .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .312 7.92 .312 7.92 .312 7.92 .312 7.92
Dim. D .250 6.35 .250 6.35 -- .250 6.35 .250 6.35 .312 7.92 .312 7.92 .312 7.92 .312 7.92
Dim. E .191 4.85 .191 4.85 .190-32 Thd 4.83 .191 4.85 .191 4.85 .251 6.38 .251 6.38 .251 6.38 .251 6.38
Dim. F
Special Features
Coaxial Connectors
-- -- -- .173 4.39 --
No Mounting Flat No Mounting Flat No Nut or Solder Lug, Threads into Panel
No Mounting Flat, Split Solder Lug
-- -- .232 5.89 --
No Mounting Flat No Mounting Flat
4
105
No Mounting Flat, Mates with 032-0072-0001 & 052-0228-0001 Only
Catalog 1308638 Revised 8-05 www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425
South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Standard Connectors -- Twinax Series Twinax Plugs:
For cables with two inner conductors and one shield
B A
A
B
Fig. 1 Slide-On Series
Fig. 2 Screw-On Series
Part No. 032-0088-0001 032-0093-0001 052-0229-0001 052-0324-0001
Fig. 1 1 2 2
Dim. A 1.085 27.56 1.085 27.56 1.085 27.56 1.095 27.81
Dim. B .312 7.92 .312 7.92 .440 11.18 .440 11.18
Cable Jacket Max. .167 4.24 .123 3.12 .123 3.12 .167 4.24
Special Features
Instruction Sheet No. 408-08528 408-08528 408-08517 408-08517
Former MICRODOT I.S. No. RF-ASMB-101 RF-ASMB-101 RF-ASMB-61 RF-ASMB-61
Assembly Tool 010-0031-0000 010-0031-0000 010-0172-0000 010-0172-0000
Twinax Receptacles and Jacks:
A B Max. Panel
A B Max. Panel
C Hex.
D Hex. Solder Pot Mounting Nut
C Hex.
D Hex.
Lockwasher Washer
Lockwasher
Solder Pot Mounting Nut
Fig. 1 Slide-On Series
Fig. 2 Slide-On Series or Screw-On Series
A B Max. Panel
F Min.
D Hex.
C Hex.
E O Min.
Mounting Nut
Lockwasher
Fig. 3 Slide-On Series or Screw-On Series
Mounting Hole
Part No. 031-0098-0001 051-0248-0001 051-0358-0001 051-0389-0001
1 2
Fig. 1 2 3 3
Dim. A .812 20.62 .960 24.38 1.060 26.92 1.255 31.88
Dim. B .155 3.94 .155 3.94 .0751 1.91 .2552 6.48
Dim. C .375 9.53 .437 11.10 .437 11.10 .437 11.10
Dim. D .375 9.53 .375 9.53 .500 12.7 .500 12.7
Dim. E .313 7.95 .313 7.95 .376 9.55 .376 9.55
Dim. F .292 7.42 .292 7.42 .351 8.92 .351 8.92
Cable Max. Jacket -- -- .167 4.24 .167 4.24
Special Features
Instruction Sheet No. -- --
Former MICRODOT I.S. No. -- -- RF-ASMB-44 RF-ASMB-44
Assembly Tool -- -- 010-0186-0000 010-0186-0000
Lockwasher not included
408-08516 408-08516
.075 [1.91] Max. Panel when mated with a Screw-On plug, .180 [4.57] Max. Panel when mated with a Slide-On plug. .255 [6.48] Max. Panel when mated with a Screw-On plug, .360 [9.14] Max. Panel when mated with a Slide-On plug.
106
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Standard Connectors -- Triax Series and Terminals Triax Plugs:
For cables with one inner conductor and two isolated shields
Part No. 052-0130-0001 052-0138-0001 052-0593-0001 Dim. A 1.37 34.80 1.37 34.80 1.37 34.80 Dim. B .440 11.18 Dia. .440 Dia. 11.18 .438 11.13 Hex. Cable Jacket Max. .124 3.15 .183 4.65 .214 5.44
B A
Special Features
Instruction Sheet No. 408-08514 408-08515
Former MICRODOT I.S. No. RF-ASMB-20 RF-ASMB-21 RF-ASMB-73
Assembly Tool -- -- --
Hex Nut w/ Safety Wire Holes, .027 [.686] Wire Max.
408-08518
Triax Receptacle:
1.11 [28.19] .160 Max. [4.06] Panel 0.50 Hex. [12.70] 0.56 Hex. [14.22] Nut Mounting Nut
O .438 Min. [11.13]
Triax Adapter:
.160 Max. [4.06] Panel 0.56 Hex. [14.22] 1.09 [27.69]
O .501 Min. [12.73]
0.62 Hex. [15.75]
.468 Min. [11.89]
Lockwasher
Lockwasher
Mounting Nut
Part Number 051-0618-0001
Mounting Hole
Part Number 053-0161-0001 Mates with Triax Plug, Both Ends
Mounting Hole
Terminals
Part No. 053-0354-0003
OB OA
Fig. 1 1 1 1 1 2 2 2 1 1 1 1 1 2 2 1 1 2 2
Dim. A .030 .762 .030 .762 .030 .762 .030 .762 .030 .762 .040 1.02 .040 1.02 .040 1.02 .041 1.04 .041 1.04 .041 1.04 .041 1.04 .041 1.04 .041 1.04 .041 1.04 .041 1.04 .041 1.04 .042 1.07 .042 1.07
Dim. B .080 2.03 .105 2.67 .125 3.18 .145 3.68 .145 3.68 .063 1.60 .094 2.39 .140 3.56 .080 2.03 .080 2.03 .080 2.03 .105 2.67 .105 2.67 .128 3.25 .128 3.25 .145 3.68 .145 3.68 .098 2.49 .098 2.49
Dim. C .630 16.00 .630 16.00 .880 22.35 .880 22.35 .880 22.35 .255 6.48 .300 7.62 .350 8.89 .430 10.92 .505 12.83 .630 16.00 .630 16.00 .875 22.23 .505 12.83 .630 16.00 .430 10.82 .630 16.00 .500 12.70 .630 16.00
Dim. D .375 9.53 .375 9.53 .610 15.49 .375 9.53 .625 15.88 .100 2.54 .100 2.54 .200 5.08 .175 4.45 .250 6.35 .375 9.53 .375 9.53 .625 15.88 .250 6.35 .375 9.53 .175 4.45 .375 9.53 .250 6.35 .375 9.53
053-0249-0001
D C
053-0495-0001 053-0656-0001 053-0294-0002 033-0115-0002 033-0116-0001 033-0117-0001 053-0154-0001 053-0250-0001
Fig. 1
Fig. 2
053-0020-0003 053-0021-0003 053-0267-0003 053-0265-0001 053-0230-0001 053-0155-0001
Terminals are gold plated. See applicable MICRODOT drawing for solder and crimp instructions.
053-0022-0003 053-0388-0001 053-0251-0001
Cable Max. Dielectric .050 1.27 .071 1.80 .083 2.11 .108 2.74 .108 2.74 .042 1.07 .068 1.73 .108 2.74 .050 1.27 .050 1.27 .050 1.27 .071 1.80 .071 1.80 .102 2.59 .102 2.59 .108 2.74 .108 2.74 .065 1.65 .065 1.65
Cable Max. Inner Conductor .015 .381 .021 .533 .022 .559 .023 .584 .023 .584 .023 .584 .023 .584 .023 .584 .019 .483 .019 .483 .015 .381 .023 .584 .023 .584 .021 .533 .018 .457 .023 .584 .023 .584 .021 .533 .021 .533
4
107
Coaxial Connectors
Catalog 1308638 Revised 8-05 www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425
South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Standard Connectors -- Module Blocks
The five faces of basic block can be used to mount any one of 10 different terminations. The 5 faces are coded with letters as shown above. The 10 terminations are coded with Nos. 1-10. Part number, to be complete, must show face location and termination Nos. desired. (Ex: illustration shows 033-0042--A2-- B7--C6--D5--E1) Ordering part number will be converted to a MICRODOT assigned number at time of ordering. We do not stock complete assemblies.
Size 50 Ohm 70 Ohm 93 Ohm Part No. 033-0042* 033-0043* 033-0044* Dim. H .250 6.35 .250 6.35 .300 7.62
D
E C
.375 [9.53]
.242 [6.15]
A B
*Part number to be completed by customer. A Computer Part Number will be assigned by Tyco Electronics.
Interfaces/Terminations
Termination Number Mating Type Description 1 S Receptacle 2 S Plug with Knurl Nut 3 QC Receptacle 4 QC Plug 5 SOS Receptacle 6 SOS Plug
.125 [3.18]
.320 [8.13]
.125 [3.18]
.345 [8.76]
.255 [6.48]
.290 [7.37]
O
O
O
50 Series 70 Series 93 Series
Thread .190-32 UNF 4.83 .216-32 UNEF 5.49 .250-32 UNEF 6.35
Thread .190-32 UNF 4.83 .216-32 UNEF 5.49 .250-32 UNEF 6.35
Dia. .230 5.84 .255 6.48 .320 8.13
Dia. .250 6.35 .250 6.35 .312 7.92
Dia. .250 6.35 .250 6.35 .250 6.35
Interfaces/Terminations (Continued)
Termination Number Mating Type Description
.350 [8.89]
7 -- Bulkhead Stud
.420 [10.67] O .191 Min. [4.85]
8 -- Bulkhead Receptacle
9 S Plug with Hex. Nut
10 S Plug, Hex. Nut With Wire Holes
.320 [8.13]
.160 Max. [4.06] Panel
.160 Max. [4.06] Panel
O Min.
.320 [8.13]
.250 Hex. [6.35] .173 Min. [4.39] Mounting Nut Solder Lug
Hex.
Hex.
Hex.
Turret Mounting Nut Solder Lug Height Min.
O .030 [.762] 3 Plcs.
Thread 50 Series 70 Series 93 Series .190-32 UNF 4.83 .190-32 UNF 4.83 .190-32 UNF 4.83
Thread .190-32 UNF 4.83 .216-32 UNEF 5.49 .250-32 UNEF 6.35
Hex. .250 6.35 .281 7.14 .312 7.92
Min. Hole Dia. .191 4.85 .217 5.51 .251 6.38
Min. Hole Height .173 4.39 .197 5.00 .232 5.89
Thread .190-32 UNF 4.83 .216-32 UNEF 5.49 .250-32 UNEF 6.35
Hex. .250 6.35 .281 7.14 .312 7.92
Thread .190-32 UNF 4.83 .216-32 UNEF 5.49 .250-32 UNEF 6.35
Hex. .250 6.35 .281 7.14 .312 7.92
108
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Standard Connectors -- Caps, Hoods Caps, Screw-On Series
For Receptacles and Jacks
0.20 [5.08] 0.13 [3.30]
Part No. S-50 Series 033-0046-0001
Fig.
Dim. A .235 5.97 .235 5.97 .255 6.48 .255 6.48 .315 8.00 .315 8.00
1 2
OA O .094 [2.39] Diamond Knurl
033-0056-0001 S-70 Series 033-0047-0001 033-0057-0001 S-93 Series 033-0048-0001
0.20 [5.08] 0.12 [3.05]
1 2
Fig. 1 With Grounding Pin
1 2
033-0058-0001
OA O .094 [2.39] Diamond Knurl
Fig. 2 Without Grounding Pin
Material -- Brass per QQ-B-626 Finish -- Silver plate per QQ-S-365, .0002 [.005] min. Note: All caps can be supplied with .094 [2.39] Dia. bead chain and end ring. When ordering, specify chain length and end ring hole size (.130 [3.30], .140 [3.56], .167 [4.24], or .193 [4.90] Dia.)
Receptacle Hoods
A
B Hex.
OC
Coaxial Connectors
Part No. 033-0067-0001 033-0068-0001 033-0069-0001 033-0084-0001 053-0147-0001
Dim. A .490 12.45 .490 12.45 .490 12.45 .490 12.45 .840 21.34
Dim. B .250 6.35 .250 6.35 .312 7.92 .250 6.35 .437 11.10
Dim. C .098 2.49 .114 2.90 .156 3.96 .156 3.96 .156 3.96
Thread .190-32 UNF 4.83 .216-32 UNEF 5.49 .250-32 UNEF 6.35 .216-32 UNEF 5.49 .375-32 UNEF 9.53
For Receptacle Series S-50, QC-50, QC-70 S-70, SOS-50, SOS-70, SOS-93 S-93, QC-93 S-70, SOS-50, SOS-70, SOS-93 Twinax/Triax Receptacle
Material -- Brass per QQ-B-626 Finish -- Silver plate per QQ-S-365, .0002 [.005] min.
4
109
South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Catalog 1308638 Revised 8-05 www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425
Coaxial Connectors Standard Connectors -- Adapters Feed-Thru Adapters for Screw-On Series
B "X" Hex.
A
A
.160 Max. [4.06] Panel B "Y" Hex. Nut
O .313 Min. [7.95]
"Y"
B "X" Hex.
.294 [7.47] Min.
Lockwasher
Mounting Nut
Fig. 1 Dim. A .300 7.62 .600 15.24 .400 10.16 .600 15.24 .410 10.41 .600 15.24
Fig. 2 Dim. B .250 6.35 .375 9.53 .250 6.35 .375 9.53 .312 7.92 .375 9.53
Mounting Hole
Part No. 033-0001-0001 033-0053-0001 033-0023-0001 033-0054-0001 033-0036-0001 033-0055-0001
Fig. 1 2 1 2 1 2
End "X" Is S-50 Receptacle S-50 Receptacle S-70 Receptacle S-70 Receptacle S-93 Receptacle S-93 Receptacle
End "Y" Is S-50 Receptacle S-50 Receptacle S-70 Receptacle S-70 Receptacle S-93 Receptacle S-93 Receptacle
BNC and TNC/MICRODOT Adapters for Screw-On, Slide-On, and QuickConnect Series
For mating BNC/TNC connectors to MICRODOT standard connectors.
End "A" Is: Configuration
.469 Min. [11.91]
.501 [12.73] Min.
Mounting Hole End "B" Is: 50 Series Part No. 70 Series Part No. 93 Series Part No.
BNC Plug
A
B
Screw-On (S) Type Plug
033-0103-0001
033-0107-0001
033-0111-0001
BNC Plug
A
B
Screw-On Type Receptacle
033-0101-0001
033-0105-0001
033-0109-0001
BNC Receptacle
A
B
Screw-On (S) Type Plug
033-0104-0001
053-0108-0001
033-0112-0001
BNC Receptacle
A
B
Screw-On (S) Type Receptacle
033-0102-0001
033-0106-0001
033-0110-0001
BNC Bulkhead Receptacle
A
B
Screw-On (S) Type Plug
033-0127-00011
--
033-0129-00011
1
Mounting information: Housing Hex. .688 [17.48], Mtg. Nut Hex. .625 [15.88], Max. Panel .090 [2.29].
110
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Standard Connectors -- Adapters (Continued) BNC and TNC/MICRODOT Adapters for Screw-On, Slide-On, and QuickConnect Series (Continued)
.501 [12.73] Min. .469 Min. [11.91]
Mounting Hole End "A" Is: Configuration End "B" Is: 50 Series Part No. 70 Series Part No. 93 Series Part No.
BNC Bulkhead Receptacle
A
B
Screw-On (S) Type Receptacle
033-0090-00011
033-0125-00011
033-0126-00011
TNC Plug
A
B
Screw-On (S) Type Receptacle
033-0141-0001
033-0143-0001
033-0145-0001
TNC Receptacle
A
B
Screw-On (S) Type Receptacle
033-0153-0001
--
--
BNC Plug
A
B
Slide-On (SOS) Type Plug
053-0339-0001
053-0339-0001
053-0339-0001
BNC Plug
A
B
Slide-On (SOS) Type Receptacle
033-0081-0001
033-0081-0001
033-0081-0001
BNC Receptacle
A
B
Slide-On (SOS) Type Plug
033-0092-0001
033-0092-0001
033-0092-0001
Coaxial Connectors
BNC Receptacle
A
B
Slide-On (SOS) Type Receptacle
033-0082-0001
033-0082-0001
033-0082-0001
BNC Bulkhead Receptacle
A
B
Slide-On (SOS) Type Receptacle
033-0124-00011
033-0124-00011
033-0124-00011
BNC Plug
A
B
Quick-Connect (QC) Type Receptacle
033-0093-0001
033-0093-0001
033-0097-0001
4
111
BNC Receptacle
A
B
Quick-Connect (QC) Type Receptacle
033-0094-0001
033-0094-0001
--
1
Mounting information: Housing Hex. .688 [17.48], Mtg. Nut Hex. .625 [15.88], Max. Panel .090 [2.29].
Catalog 1308638 Revised 8-05 www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425
South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Gold Plated Crimp Style Coaxial Connectors Performance Data Summary For Gold Plated Crimp Style Coaxial Connectors
Mechanical
Captive Contacts -- Terminated connector contacts captivated from movement in both directions. Cable Retention -- 50 Ohm connectors, 15 lb. min. 70 Ohm connectors, 25 lb. min. 93 Ohm connectors, 25 lb. min. Recommended Coupling Torque (Threaded Interface) -- 8 inch/pounds max. [.904 Nm] Recommended Receptacle Mounting Torque (Threaded Interface) -- 8 inch/pounds max. [.904 Nm] Contact Protection (Unmated) -- Pin contact protected by coupling nut. Socket protected by insulator and housing. Vibration1,2 -- MIL-STD-202, Method 204, Test condition B (15 G peak). No physical damage or electrical discontinuities in excess of 1 microsecond. Shock1,2 -- MIL-STD-202, Method 213, Test Condition H. No physical damage or electrical discontinuity after shock. Thermal Shock -- MIL-STD-202, Method 107, Test Condition C. Moisture Resistance1 -- MIL-STD202, Method 106. Salt Spray1 -- MIL-STD-202, Method 101, Test Condition B (48 hours).
Materials
Housing, Nut, Inner Sleeve -- Brass per ASTM-B-16, 35% Zinc. Insulator -- TEFLON per ASTM-D-1710. Pin & Socket Contacts -- Beryllium Copper per ASTM-B-196. Middle Sleeve -- Copper Alloy. Facial Seal4, Sealing Sleeve & Gasket -- Silicone Rubber per ZZ-R-765. Lockwasher -- #425 Bronze Alloy.
Plating
Contacts, Housing, Nut, Inner Sleeve, Middle Sleeve, Lockwasher -- Gold per MIL-G-45204, Type II, Grade C, Class 1.
NOTES: 1 Screw-On Series threaded interface. 2 Tyco Electronics recommends the use of wired connectors in vibration and shock environments. See individual specifications for connectors with wire holes. 3 VSWR is a system specification. Where performance is critical, purchase Tyco Electronics cable assemblies (See page 127) and specify VSWR testing and mating connector part numbers.
Electrical
Impedance -- Designed to be compatible with 50, 70, or 93 Ohm miniature coaxial cable. Dielectric Withstanding Voltage -- 1000 volts RMS at sea level. Contact Resistance -- 4 milliohms max., D.C. Contact Capacity -- 3 amps, D.C. Insulation Resistance -- 5 x 103 Megohms min. @ 500 volts D.C. Voltage Standing Wave Ratio3 (VSWR) -- Typical 50 Ohm series, 1.2 max. to 2 GHz.
Assembly Methods
Straight Plugs & Jacks -- Cable Inner Conductor: Crimped to contact. Cable Shield: Crimped under housing. Right-Angle Plugs -- Cable Inner Conductor: Crimped to contact. Cable Shield: Crimped under housing.
Environmental
Temperature Range (Continuous Service) -- -80F to +392F. [-62C to +200C].
112
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Gold Plated Crimp Style Coaxial Connectors -- Screw-On Series Straight Plugs
A
A
B Hex.
OB
Fig. 1 Partial Hex. Nut
A
Fig. 2 Knurl Nut
A
B Hex.
B Hex.
Fig. 3 Full Hex. Nut Dim. A Dim. B Cable Max.
Fig. 4 Hex. Nut w/ 3 Safety Wire Holes Instruction Sheet No. Former MICRODOT I.S. No.
Part No.
Fig.
Special Features
50 Ohm Series .190 [4.83] -32 UNF-2B Thread .800 20.32 .800 132-0112-0002 2 20.32 .800 132-0112-0003 3 20.32 .800 132-0112-0004 4 20.32 .800 132-0113-0001 1 20.32 .800 132-0113-0002 2 20.32 .800 132-0113-0003 3 20.32 .800 132-0113-0004 4 20.32 .800 132-0114-0001 1 20.32 .800 132-0114-0002 2 20.32 .800 132-0114-0003 3 20.32 .800 132-0114-0004 4 20.32 .800 1 132-0115-0001 20.32 .800 132-0115-0002 2 20.32 .800 132-0115-0003 3 20.32 .800 4 132-0115-0004 20.32 .800 132-0509-0002 2 20.32 70 Ohm Series .216 [5.49] -32 UNEF-2B Thread .800 132-0200-0001 1 20.32 .800 132-0200-0002 2 20.32 .800 132-0200-0003 3 20.32 .800 132-0200-0004 4 20.32 .800 1 132-0201-0001 20.32 .800 2 132-0201-0002 20.32 .800 132-0201-0003 3 20.32 .800 132-0201-0004 4 20.32 132-0112-0001 1 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .281 7.14 .290 7.37 .281 7.14 .281 7.14 .281 7.14 .290 7.37 .281 7.14 .281 7.14 .088 2.24 .088 2.24 .088 2.24 .088 2.24 .088 2.24 .088 2.24 .088 2.24 .088 2.24 .110 2.79 .110 2.79 .110 2.79 .110 2.79 .110 2.79 .110 2.79 .110 2.79 .110 2.79 .116 2.95 .110 2.79 .110 2.79 .110 2.79 .110 2.79 .110 2.79 .110 2.79 .110 2.79 .110 2.79 408-08508 408-08508 408-08508 408-08508 With environmental seal With environmental seal With environmental seal With environmental seal 408-08508 408-08508 408-08508 408-08508 408-08508 408-08508 408-08508 408-08508 With environmental seal With environmental seal With environmental seal With environmental seal Dual shield cable version of RG 188 & 316 408-08508 408-08508 408-08508 408-08508 408-08508 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8
Coaxial Connectors
408-08508 408-08508 408-08508 408-08508 With environmental seal With environmental seal With environmental seal With environmental seal 408-08508 408-08508 408-08508 408-08508
RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8
4
113
Catalog 1308638 Revised 8-05 www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425
South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Gold Plated Crimp Style Coaxial Connectors -- Screw-On Series (Continued) Straight Plugs (Continued)
Dim. A Dim. B Cable Max. Instruction Sheet No. Former MICRODOT I.S. No.
Part No.
Fig.
Special Features
93 Ohm Series .250 [6.35] -32 UNEF-2B Thread 132-0300-0001 132-0300-0002 132-0300-0003 132-0300-0004 132-0301-0001 132-0301-0002 132-0301-0003 132-0301-0004 1 2 3 4 1 2 3 4 .795 20.19 .795 20.19 .795 20.19 .795 20.19 .795 20.19 .795 20.19 .795 20.19 .795 20.19 .312 7.92 .320 8.13 .312 7.92 .312 7.92 .312 7.92 .320 8.13 .312 7.92 .312 7.92 .155 3.94 .155 3.94 .155 3.94 .155 3.94 .155 3.94 .155 3.94 .155 3.94 .155 3.94 408-08508 408-08508 408-08508 408-08508 With environmental seal With environmental seal With environmental seal With environmental seal 408-08508 408-08508 408-08508 408-08508 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8
OB
Right-Angle Plugs
C
A
Knurl Nut
Part No.
Dim. A
Dim. B
Dim. C
Cable Jacket Max. .088 2.24 .088 2.24 .110 2.79 .110 2.79 .110 2.79 .110 2.79 .155 3.94 .155 3.94
Special Features
Instruction Sheet No.
Former MICRODOT I.S. No.
50 Ohm Series .190 [4.83] -32 UNF-2B Thread .660 .250 132-0116-0002 16.76 6.35 .660 .250 132-0117-0002 16.76 6.35 .695 .250 132-0118-0002 17.65 6.35 .695 .250 132-0119-0002 17.65 6.35 70 Ohm Series .216 [5.49] -32 UNEF-2B Thread .695 .290 132-0202-0002 17.65 7.37 .695 .290 132-0203-0002 7.37 17.65 93 Ohm Series .250 [6.35] -32 UNEF-2B Thread .710 .320 132-0302-0002 8.13 18.03 .710 .320 132-0303-0002 8.13 18.03
.620 15.75 .620 15.75 .650 16.51 .650 16.51 .650 16.51 .650 16.51 .680 17.27 .680 17.27
408-08509 With environmental seal 408-08509 408-08509 With environmental seal 408-08509
RF-ASMB-11 RF-ASMB-11 RF-ASMB-11 RF-ASMB-11
408-08509 With environmental seal 408-08509
RF-ASMB-11 RF-ASMB-11
408-08509 With environmental seal 408-08509
RF-ASMB-11 RF-ASMB-11
114
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Gold Plated Crimp Style Coaxial Connectors -- Screw-On Series (Continued) Jacks
B Hex. A
B
C Max. Panel
O .313 Min. [7.95]
.375 Hex. [9.53] Nut
.375 Hex. [9.53]
.292 Min. [7.42]
Mounting Nut
Lockwasher
Fig. 1
Fig. 2
Mounting Hole
Part No.
Fig.
Dim. A
Dim. B
Dim. C
Cable Jacket Max. .088 2.24 .088 2.24 .110 2.79 .110 2.79 .116 2.95 .116 2.95 .110 2.79 .110 2.79 .155 3.94 .155 3.94
Special Features
Instruction Sheet No.
Former MICRODOT I.S. No.
50 Ohm Series .190 [4.83] -32 UNF-2B Thread .770 131-0134-0001 1 19.56 .770 2 131-0135-0001 19.56 .770 131-0136-0001 1 19.56 .770 131-0137-0001 2 19.56 .770 131-0150-0001 1 19.56 .770 131-0151-0001 2 19.56 70 Ohm Series .216 [5.49] -32 UNEF-2B Thread .770 131-0200-0001 1 19.56 .770 131-0201-0001 2 19.56 93 Ohm Series .250 [6.35] -32 UNEF-2B Thread .760 131-0300-0001 1 19.30 .760 131-0301-0001 2 19.30
.250 6.35 .360 9.14 .250 6.35 .360 9.14 .250 6.35 .360 9.14 .281 7.14 .360 9.14 .312 7.92 .350 8.89
-- .105 2.67 -- .105 2.67 -- .105 2.67 -- .100 2.54 -- .095 2.41
408-08508 408-08508 408-08508 408-08508 Dual Shield Cable Version of RG 188 & 316 Dual Shield Cable Version of RG 188 & 316 408-08508 408-08508
RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8 RF-ASMB-8
408-08508 408-08508
RF-ASMB-8 RF-ASMB-8
408-08508 408-08508
RF-ASMB-8 RF-ASMB-8
4
115
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors
Coaxial Connectors Gold Plated Crimp Style Coaxial Connectors -- Screw-On Series (Continued) Receptacles
B Max. Panel A
B Max. Panel A
C
D Hex.
C
D Hex. Solder Pot
O E Min. F Min.
Turret Solder Lug Mounting Nut
Solder Lug
Mounting Nut
Fig. 1
A
A B
Fig. 2
B .245 [6.22]
Mounting Hole for Fig. 1 & 2
.200 .005 [5.08 0.13] Typ.
.100 .005 [2.54 0.13]
C
Typ.
D C
O .037 Typ. [0.94]
O .055 Min. [1.40] Typ.
O .037 Typ. [0.94]
Fig. 3 Dim. A 50 Ohm Series .190 [4.83] -32 UNF-2A Thread .605 131-0138-0002 1 15.37 .515 131-0139-0002 2 13.08 .255 131-0140-0001 2 6.48 .340 131-0141-0002 3 8.64 .425 131-0142-0002 4 10.80 70 Ohm Series .216 [5.49] -32 UNEF-2A Thread .605 131-0202-0002 1 15.37 .340 131-0705-0001 3 8.64 93 Ohm Series .250 [6.35] -32 UNEF-2A Thread .340 131-0303-0002 3 8.64 .425 131-0304-0001 4 10.80 .605 1 131-0904-0001 15.37 Part No. Fig. Dim. B .160 4.06 .150 3.81 -- .155 3.94 .155 3.94 .160 4.06 .155 3.94 .155 3.94 .155 3.94 .160 4.06 Dim. C .250 6.35 Hex. .187 Wrench Flats 4.75 .187 Wrench Flats 4.75 .330 Dia. 8.38 .330 8.38 Dia. .250 6.35 Hex. .330 8.38 Dia. .330 Dia. 8.38 .330 8.38 Dia. .312 7.92 Hex. Dim. D .250 6.35 .250 6.35 -- -- .480 12.19 .281 7.14 -- Dim. E .191 4.85 .191 4.85 .190 -32 Thd. 4.83 -- -- .217 5.51 --
Fig. 4 Dim. F .173 4.39 -- -- -- -- .197 5.00 -- No Mounting Flat
Mounting Pattern for Fig. 3 & 4 Special Features
No Nut or Solder Lug, Threads into Panel
-- .480 12.19 .312 7.92
-- -- .251 6.38
-- -- .232 5.89
Gold Plated Crimp Style Coaxial Connectors Assembly Tools
Table 1. Contact Crimp Tools
MICRODOT Part No. 010-0065-0000 Manufacturers Part No. Astro Tool A-810-3
Table 2. Housing Crimp Tools
MICRODOT Part No. 010-0081-0000 010-0082-0000 010-0083-0000 Thomas & Betts Part No. WT-400 WT-402 WT-406 Max. Cable Diameter .088 [2.24] .110 [2.79] .155 [3.94]
Pin Contact Sealing Sleeve Inner Sleeve
Housing Insulator
Housing Sub-assembly Plug
Middle Sleeve
Cable Insulator Socket Contact Housing Insulator Housing
Jack Gasket
116
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors LEPRA/CON Ultra-Miniature Connectors Performance Data Summary For LEPRA/CON Connectors
Mechanical
Captive Contacts -- Terminated connector contacts captivated from movement in both directions. Cable Retention -- 10 lb. min. when properly assembled to RG196/U and RG178/U cable. Recommended Coupling Torque (Threaded Interface) -- 24 inch/ounces max. Recommended Receptacle Mounting Torque (All Series) -- 24 inch/ounces max. Typical Cable Acceptance Dimensions -- Inner conductor: .012 [0.31] nom. Dielectric: .039 [0.99] max. Shield: .059 [1.50] max. Jacket: .081 [2.06] max. Contact Protection (Unmated) -- Twist pin contact protected from damage by insulator. Tube socket protected by connector housing.
Environmental
Temperature Range (Continuous Service) -- -85F to +392F [-65C to +200C]. Vibration1,2 -- MIL-STD-202, Method 204, Test Condition B (15 G peaks). No physical damage or electrical discontinuities in excess of 1 microsecond. Shock1,2 -- MIL-STD-202, Method 213, Test Condition H. No physical damage or electrical discontinuity after shock. Thermal Shock -- MIL-STD-202, Method 107, Test Condition C. Moisture Resistance1 -- MIL-STD202, Method 106. Salt Spray1 -- MIL-STD-202, Method 101, Test Condition B (48 hours).
Voltage Standing Wave Ratio3 (VSWR) -- Typical 50 Ohm Series, 1.2 Maximum to 2 GHz.
Materials
Housing, Nut, Ferrule -- Brass per ASTM-B-16. Insulator -- TEFLON per ASTM-D-1710. Pin & Socket Contact -- Copper Alloy. Crimp Sleeve -- Copper Alloy. Lockwasher -- #425 Bronze Alloy.
Plating
Contacts, Housing, Nut, Ferrule, Crimp Sleeve, Lockwasher -- Gold per MIL-G-45204, Type II, Grade C, Class 1.
Notes: 1 Screw-On Series, threaded interface. 2 Tyco Electronics recommends the use of safety wired connectors in vibration and shock environments. See individual specifications with wire holes. 3 VSWR is a system specification. Where performance is critical, purchase Tyco Electronics cable assemblies with Screw-On connectors (See page 129) and specify VSWR testing and mating connector part numbers.
Electrical
Impedance -- Designed to be compatible with 50 Ohm coaxial cable RG178/U. Dielectric Withstanding Voltage -- 450 volts RMS at sea level, 250 volts RMS at 50,000 ft [15,240 m], 150 volts RMS at 70,000 ft. [21,336 m] Contact Resistance -- 8 milliohms max., D.C. Contact Capacity -- 3 amps, D.C. Insulation Resistance -- 104 Megohms min. @ 500 volts D.C.
Assembly Methods
Straight Plugs & Jacks -- Cable Inner Conductor: Crimped to contact. Cable Shield: Crimped under housing. Right-Angle Plugs -- Cable Inner Conductor: Soldered to contact. Cable Shield: Crimped under housing.
4
117
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors
Coaxial Connectors LEPRA/CON Ultra-Miniature Connectors -- Screw-On Series Featuring Twist Pin, Pin and Socket Contacts, Standard Interface
MICRODOT twist pin, pin and socket contacts are used in LEPRA/CON connectors. Twist pin contact pins are produced from beryllium copper material with a gold-plated finish and constructed with helicallywound stress free cable of spring copper around a highly conductive soft copper core, terminated with a hemispherical weld. Twist pin contacts contain seven selfwiping spring surfaces, designed for consistent continuity and very low noise level. Twist pin contacts are self-aligning because of the contactengaging-end configuration. The sockets are a closed entry tubular-type contact, made of gold-plated copper alloy. The connectors are designed to be used with coaxial cables RG196/U and RG178/U. The connectors are designed with the contacts completely protected for reliability. The use of twist pin contacts makes the connectors very rugged for their size.
.015 Dia. [0.38] 3 Places (142-0000-0003 Only)
Solder Center Conductor to Contact .015 Dia. [0.38] 3 Places (142-0002-0003 Only) .380 [9.65]
.395 [10.03]
.125 -44UNF-2B [3.18] (Modified)
.580 [14.73]
.125-44UNF-2B [3.18] (Modified)
Straight Plugs1 Part No. 142-0000-0001 142-0000-0002 142-0000-0003 Nut Style .156 [3.96] Hex. .160 [4.06] Dia. Knurl .156 [3.96] Hex. w/ Safety Wire Holes Part No. 142-0002-0001 142-0002-0002 142-0002-0003
Right-Angle Plug1 Nut Style .156 [3.96] Hex. .160 [4.06] Dia. Knurl .156 [3.96] Hex. w/ Safety Wire Holes
Assembly instructions: RF-ASMB-12
.125-44UNF-2A [3.18] (Modified) .580 [14.73]
Assembly instructions: RF-ASMB-13
.580 [14.73] .093 Max. [2.36] Panel
.270 [6.86]
.156 [3.96] Hex. Stk.
.270 [6.86]
.156 [3.96] Hex. Stk.
.125-44UNF-2A [3.18] (Modified)
Jack1 Part Number 141-0000-0001 Instruction Sheet Number 408-08510 Former MICRODOT I.S. Number RF-ASMB-12
.125-44UNF-2A [3.18] (Modified)
Bulkhead Jack1 Part Number 141-0001-0001 Instruction Sheet Number 408-08510 Former MICRODOT I.S. Number RF-ASMB-12
.425 [10.80] .156 2 Plcs. [3.96]
Turret
.022 Solder Pot [0.56] I.D.
.260 [6.60]
.093 Max. [2.36] Panel .022 Turret I.D. [0.56]
.140 [3.56] .156 [3.96] 2 Plcs.
.093 Max. [2.36] Panel .425 [10.80]
.125-44UNF-2B [3.18] (Modified)
.022 Solder Pot I.D. [0.56]
Front Mount Receptacle1 Part No. 141-0002-0001 141-0002-0002
1
Rear Mount Receptacle1 Part No. 141-0003-0001 141-0003-0002 Contact Tail Turret Solder Pot
Contact Tail Turret Solder Pot
Mounting hole pattern and assembly tools shown on page 123.
118
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors LEPRA/CON Ultra-Miniature Connectors -- Screw-On Series (Continued) Featuring Twist Pin, Pin and Socket Contacts, Standard Interface (Continued)
.125-44UNF-2A [3.18] (Modified) .225 [5.72] .172 [4.37]
.026 Dia.-Typ. [.660]
Straight Printed Circuit Receptacle1 Part No. 141-0004-0001
.370 [9.40]
.370 [9.40] Cavity Potted With Epoxy .120 [3.05]
Cavity Potted With Epoxy
.385 [9.78]
.385 [9.78] .125-44UNF-2A Thd. [3.18] (Modified) .026 Dia. [6.60] 5 Plcs. .172 [4.37]
.120 [3.05]
.125-44UNF-2A Thd. [3.18] (Modified)
.172 [4.37]
Shipping Fixture
.026 Dia. [6.60] Typ.
Right-Angle Printed Circuit Receptacle1 (Small Mounting Pattern) Part Number 141-0019-0001
Right-Angle Printed Circuit Receptacle1 (Standard Mounting Pattern) Part Number 141-0010-0001
.545 [13.84] .205 [5.21] .080 Max. [2.03] Panel .125 -UNF44-2A Thd. [3.18] (Modified) Both Ends .202 [5.13] Min. .217 [5.51] .250 Hex. [6.35] 2 Plcs. .216-32 UNF [5.49] Thd.
.156 [3.96] Hex. .125-44 UNF-2A [3.18] (Modified)
Feed-Thru Bulkhead Adapter (Both Ends are Receptacle Interface) Part Number 143-0005-0001
Coaxial Connectors
.275 [6.99] .490 [12.45]
.093 Max. [2.36] Panel
.115 [2.92] .156 [3.96] Sq. .285 [7.24] Cavity Filled With Epoxy
Straight Plug
4
119
Right-Angle Receptacle1 Part Number 141-0013-0001
1
Mounting hole pattern and assembly tools shown on page 123.
Catalog 1308638 Revised 8-05 www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425
South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors LEPRA/CON Ultra-Miniature Connectors -- Screw-On Series (Continued) Featuring Twist Pin, Pin and Socket Contacts with Locking Interface
The MICRODOT LEPRA/CON coaxial connector series is now offered with a unique locking interface feature. This new coupling design permits the user to lock the coaxial plug, when mated to its receptacle, preventing any axial rotation. This adaptation is especially popular on connector installations requiring straight or 90 cable terminations firmly held in a fixed position. The locking interface is especially suited for telecommunications and instrumentation applications.
Solder Center Conductor to Contact .395 [10.03]
.015 Dia. 3 Plcs. Ref. [0.38] (142-005-0003 Only)
.015 Dia. 3 Plcs. [0.38] (142-0010-0003 Only)
.380 [9.65]
.125-44UNF-2B [3.18] (Modified)
.125-44UNF-2B [3.18] (Modified)
.580 [14.73]
Straight Plug1
Right-Angle Plug1
Part No. 142-0010-0001 142-0010-0002 142-0010-0003
Nut Style .156 [3.96] Hex. .160 [4.06] Dia. Knurl .156 [3.96] Hex. w/ Safety Wire Holes
Part No. 142-0005-0001 142-0005-0002 142-0005-0003
Nut Style .156 [3.96] Hex. .160 [4.06] Dia. Knurl .156 [3.96] Hex. w/ Safety Wire Holes
Assembly instructions: RF-ASMB-12, 142-0010-0001
Assembly instructions: RF-ASMB-13, 142-0005-0001
1
Assembly tools; page 123.
120
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors LEPRA/CON Ultra-Miniature Connectors -- Screw-On Series (Continued) Featuring Twist Pin, Pin and Socket Contacts with Locking Interface
(Continued)
.590 [14.99]
.285 [7.24]
.590 [14.99] .093 Max. [2.36] Panel
.156 [3.96]
.125-44UNF-2A [3.18] (Modified)
.156 2 Plcs. [3.96]
.125-44UNF-2A [3.18] (Modified)
Straight Jack1 Part Number 141-0017-0001 Instruction Sheet Number 408-08510 Former MICRODOT I.S. Number RF-ASMB-12
.125-44UNF-2A [3.18] (Modified)
Bulkhead Jack1 Part Number 141-0014-0001 Instruction Sheet Number 408-08510 Former MICRODOT I.S. Number RF-ASMB-12
.022 Solder Pot [.559] I.D.
.156 Hex. [3.96] 2 Plcs.
.022 Solder Pot [.559] I.D. Turret
.156 2 Plcs. [3.96] Turret .155 [3.94] .093 Max. [2.36] Panel .440 [11.18]
.275 [6.99] .125-44UNF-2A Thd. [3.18] (Modified) .440 [11.18]
.093 Max. [2.36] Panel
Front Mount Receptacle1 Part No. 141-0012-0001 141-0012-0002 Contact Tail Solder Pot Turret
Rear Mount Receptacle w/ Locking Interface1 Part No. 141-0011-0001 141-0011-0002 Contact Tail Turret Solder Pot
.240 [6.10] .125-44UNF-2A [3.18] (Modified)
.172 [4.37]
.156 [3.96] .125-44UNF-2A [3.18] (Modified)
.026 Dia. [0.66] Typ.
Coaxial Connectors
.275 [6.99] .490 [12.45]
.093 Max. [2.36] Panel
Straight Printed Circuit Receptacle1 Part Number 141-0015-0001
.385 [9.78]
Cavity Potted With Epoxy .120 [3.05]
.115 [2.92] Cavity Filled With Epoxy .156 Sq. [3.96] .300 [7.62]
.385 [9.78]
.125-44UNF-2A [3.18] (Modified)
.172 [6.77]
4
121
Right-Angle Receptacle1 Part Number 141-0020-0001
.026 Dia. [.660] 5 Plcs. Shipping Fixture
Right-Angle Printed Circuit Receptacle1 Part Number 141-0023-0001
1
Mounting hole pattern and assembly tools shown on page 123.
Catalog 1308638 Revised 8-05 www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425
South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors LEPRA/CON Ultra-Miniature Connectors -- Slide-On Series Featuring Twist Pin, Pin and Socket Contacts
LEPRA/CON Slide-On Connectors offer a convenient mating style along with Ultra-miniature size. Inner contacts are twist pin tubular sockets in plugs and twist pin contacts for jacks and receptacles. Positive housing contact is provided by a three finger contact in the plug housing.
.125 [3.18]
.610 [15.49]
.125 Dia. [3.18]
.440 [11.18]
Straight Plug1 Part Number 142-1000-0001 Instruction Sheet Number 408-08512 Former MICRODOT I.S. Number RF-ASMB-15
.380 [9.65]
Right-Angle Plug1 Part Number 142-1002-0001 Instruction Sheet Number 408-08513 Former MICRODOT I.S. Number RF-ASMB-16
.250 Hex. [6.35] 2 Plcs. .190 -32UNF-2 Thd. [4.83] .265 [6.73] .445 [11.30] .140 Max. [3.56] Panel O .191 Min. [4.85]
.335 [8.51] .640 [16.26] .093 Max. [2.36] Panel
.490 [12.45]
Mounting Hole
.156 Hex. [3.96] 2 Plcs.
.125-44UNF-2A [3.18] (Modified)
Right-Angle Bulkhead Mount Plug1 Part Number 142-1021-0001 Instruction Sheet Number 408-08519 Former MICRODOT I.S. Number RF-ASMB-76
Straight Bulkhead Jack1 Part Number 141-1001-0001 Instruction Sheet Number 408-08512 Former MICRODOT I.S. Number RF-ASMB-15
.570 [3.99]
.220 [5.59]
.495 [12.57]
.022 Solder Pot [0.56] I.D. .093 Max. [2.36] Panel Turret
.125 Dia. [3.18]
Straight Jack1 Part Number 141-1000-0001 Instruction Sheet Number 408-08512 Former MICRODOT I.S. Number RF-ASMB-15
.125-44UNF-2 [3.18] (Modified)
.156 Hex. [3.96] 2 Plcs.
Front Mount Receptacle1 Part No. 141-1002-0001 141-1002-0002 Contact Tail Turret Solder Pot
1
Mounting hole and assembly tools shown on page 123.
122
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors LEPRA/CON Ultra-Miniature Connectors -- Slide-On Series (Continued) Featuring Twist Pin, Pin and Socket Contacts
(Continued)
.156 Hex. [3.96]
.022 Solder Pot [.559] I.D.
.275 .490 [6.99] [12.45]
.125-44UNF-2A [3.18] (Modified) .156 [3.96] Hex. 2 Plcs. .335 [8.51] .495 [12.57] .093 Max. [2.36] Panel Turret
.115 [2.92] .156 Sq. [3.96] Cavity Filled With Epoxy
Rear Mount Receptacle Part No. 141-1003-0001 141-1003-0002 Contact Tail Turret Solder Pot
.425 [10.80]
.385 [9.78]
Right-Angle Receptacle Mounting Hole Shown Below Part Number 141-1012-0001
Mounting Hole shown below.
.026 Dia. Typ [0.66]
.097 Dia. [2.46]
.385 [9.78]
.120 [3.05]
.172 [4.37]
.260 [6.60]
.172 [4.37]
.026 Dia. Typ. [0.66]
Straight Printed Circuit Receptacle Mounting Hole Pattern Shown Below Part Number 141-1004-0001
Right-Angle Printed Circuit Receptacle Mounting Hole Pattern Shown Below Part Number 141-1005-0001
.126 [3.20] Min.
.095-.105 Typ. [2.41-2.67]
.045-.055 Typ. [1.14-1.40]
.046 Dia. Min. [1.17] 5 Holes
Coaxial Connectors
.114 Min. [2.90]
.095-.105 Typ. [2.41-2.67]
.195-.205 Typ. [4.95-5.21]
.046 Dia. Min. [1.17] 5 Holes
Bulkhead Receptacle Mounting Hole
Standard Pattern
Small Pattern Connectors 141-0019-0001 and 141-0023-0001 Only
Printed Circuit Receptacle Mounting Hole Pattern
LEPRA/CON Connector Assembly Tools
4
Contact Crimp Tool Housing Crimp Tool MICRODOT Part No. 010-0132-0000 Thomas & Betts Part No. WT-419 Connector Straight Connector Only 141-1001-0001 Contact Crimp No. 010-0150-0000 010-0161-0000 Astro Tool Part No. A-826-1 827
123
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors LEPRA/CON Ultra-Miniature Connectors (Continued) BNC / LEPRA/CON Connector Adapters
.125-44UNF-2A [3.18] (Modified)
End B
End A
.125-44UNF-2A [3.18] (Modified) End A End B
.900 [22.86]
.850 [21.59]
End "B" is MICRODOT End "A" is BNC Plug Screw-On Plug Part Number 143-0001-0001
End "A" is BNC Receptacle
End "B" is MICRODOT Screw-On Receptacle Part Number 143-0003-0001
.950 [24.13]
.125-44UNF-2B [3.18] (Modified)
.125-44UNF-2A [3.18] (Modified)
End A
End A End B
End B
.865 [21.97]
End "A" is BNC Plug
End "B" is MICRODOT Screw-On Plug with Locking Interface Part Number 143-0029-0001
End "A" is BNC Receptacle
End "B" is MICRODOT Screw-On Receptacle with Locking Interface Part Number 143-0032-0001
.835 [21.21]
End B .125-44UNF-2A [3.18] (Modified) .785 [19.94]
End A
End A
End B
End "B" is Screw-On Receptacle
End "A" is BNC Plug
End "A" is BNC Plug
Part Number 143-0002-0001
End "B" is MICRODOT Slide-On Plug Part Number 143-1000-0001
124
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors LEPRA/CON Ultra-Miniature Connectors (Continued) BNC / LEPRA/CON Connector Adapters
(Continued)
.800 [20.32] .125-44UNF-2A [3.18] (Modified)
.900 [22.86]
End A
End B
End A
End B
End "A" is BNC Plug
End "B" is MICRODOT Receptacle with Locking Interface Part Number 143-0031-0001
End "A" is BNC Plug
End "B" is MICRODOT Slide-On Receptacle Part Number 143-1002-0001
.125-44UNF-2B [3.18] (Modified) End A End B
End A
End B
.965 [24.51]
.900 [22.86]
End "A" is BNC Receptacle
End "B" is MICRODOT Screw-On Plug Part Number 143-0004-0001
End "A" is BNC Receptacle
End "B" is MICRODOT Slide-On Plug Part Number 143-1001-0001
.125-44UNF-2B [3.18] (Modified)
End A
End B
End A
End B
Coaxial Connectors
1.015 [25.78]
.965 [24.51]
End "A" is BNC Receptacle
End "B" is MICRODOT Screw-On Plug with Locking Interface Part Number 143-0030-0001
End "A" is BNC Receptacle
End "B" is MICRODOT Slide-On Receptacle Part Number 143-1003-0001
4
125
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors LEPRA/CON Ultra-Miniature Connectors -- Snap-Lock Series Product Facts
I
Simple coupling design eliminates the need for tools and saves assembly time Positive locking mechanism provides its own fail-safe features Inspection of the mated connector is fast, simple and effective Push-Pull design allows higher panel density Quick-connect and disconnect features
I
I
I I
Performance Data Summary For Snap-Lock Connectors
Electrical
Impedance -- Designed to be compatible with 50 Ohm coaxial cables (Dual Shield RG 196). Dielectric Withstanding Voltage -- 450 volts RMS at sea level (Operating). Contact Resistance -- 8 milliohms max. at 3 amps. Average resistance: 4 milliohms Insulation Resistance -- 104 megohms min. Voltage Standing Wave Ratio (VSWR) -- 3.4 max., 1.3 min. to 12 GHz.
Environmental
Temperature Range -- -85F to +257F [-65C to +125C]. Vibration -- MIL-STD-202, Method 204, Test condition D. No change in electrical discontinuity in excess of 1 microsecond. Shock -- MIL-STD-202, Method 213A, Test Condition C. No electrical discontinuity or evidence of physical damage.
All-Crimp Assembly -- Center contacts and shield are crimped individually. Durability -- 500 mating cycles.
Materials
Body and Body Components -- Brass per QQ-B-626 Comp 360. Contact Material -- Copper Alloy. Crimp Sleeves -- Leaded Copper. Insulators -- TEFLON per ASTM-D-1710. Lockwashers -- #425 Bronze Alloy. Plating -- Gold per MIL-G-45204, Type II, Grade C, Class 1.
Mechanical
Cable Acceptance Dimensions -- Center conductor: .012 [0.31] nom. Dielectric: .040 [1.02] max. Shield: .080 [2.03] max. Jacket: .090 [2.29] max..
.250 [6.35]
.750 [19.05]
.219 [5.56]
.146-.149 [3.71-3.78]
.719 [18.26]
.093 Max. [2.36] Panel
.406 [10.31] 8-32 UNC-2A (Modified)
.312 [7.92]
.165-.168 [4.19-4.27]
Straight Plug Part Number 144-0001-0001
Bulkhead Jack, Rear Mount Part Number 145-0001-0001
"D" Hole Dimensions For Panel Mounting
.625 [15.88]
.219 [5.56]
.219 [5.56]
.625 [15.88]
Connector/Cable Assembly Crimp Tools -- Center Contact and Shield
Tool SKT & Pin Crimp Housing Crimp Part No. 010-1004-0000 010-0081-0000
.093 Max. [2.36] Panel
.406 [10.31] 8-32 UNC-2A (Modified)
.312 [7.92]
.312 [7.92]
.093 Max. [2.36] Panel
.285 [7.24]
8-32 UNC-2A (Modified)
Receptacle, Rear Mount Part Number 145-0003-0001
Receptacle, Front Mount Part Number 145-0002-0001
126
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Cable Assemblies Capability
The experience Tyco Electronics has gained through years of pioneering efforts in the development of MICRODOT miniaturized cable and connectors is available to customers in the assembly of complex cable/connector combinations. This experience offers the customer low cost and no tooling charges, precision construction, thorough inspection and prompt delivery. The capability also makes it possible for the designer to specify a complete assembly or harness with the understanding that Tyco Electronics will deliver a custom fabrication equal in quality to the MICRODOT components it contains. These assemblies are made to the customer's specifications or are designed by the Company's experienced engineers to fit particular requirements. Special features are light weight, reduced size, high operating temperatures and comprehensive layouts.
How To Order
1. Specify MICRODOT part numbers A. Connector, one end B. Connector, other end C. Cable 2. Specify normal length A. Overall length
Jacks Plugs
3. Specify length tolerance A. Standard tolerance
Assembly Length 0 thru 12-1/2" Over 12-1/2" thru 1000" Over 1000" Tolerance 1/8" 1% rounded to nearest 1/4" 1% rounded to nearest 1"
O. A. L. Jacks Right Angles
B. Special tolerance Tolerances as close as .5% are available for most cable assemblies at a premium rate. Consult Tyco Electronics for details. 4. Specify cable strip (Applies to cable assemblies with only one connector)
O. A. L. Right Angles Right Angles
A. Not stripped B. Standard strip
O. A. L.
12"
B. Or length between connectors
Jacks Plugs
Coaxial Connectors
12"
12"
Cable Length Between Connectors Jacks Right Angles
Standard Strip
C. Special strip - specify style Example: Connector: 142-1000-0001 one end 142-1002-0001 other end Length: 36" overall, standard tolerance
Cable Length Between Connectors Right Angles Right Angles
4
127
Cable Length Between Connectors
Catalog 1308638 Revised 8-05 www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425
South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Cable Assemblies (Continued) Mating Interface Chart
Series S50 50 Ohm 50 Ohm S70 70 Ohm 70 Ohm S93 93 Ohm 93 Ohm SOS 50 SOS 70 SOS 93 QC 50 QC 70 QC 93 Screw-On Slide-On Screw-On Screw-On Screw-On Slide-On Plugs Description Standard Gold Plated Crimp Style Cap Standard Gold Plated Crimp Style Cap Standard Gold Plated Crimp Style Cap Standard Standard Standard Standard Standard Standard Twinax Twinax Triax LEPRA/CON Connector LEPRA/CON Connector Interlocking Interface LEPRA/CON Connector Page 94, 95 113, 114 109 94, 95 113, 114 109 94, 95 114 109 99, 100 100, 101 100, 101 103, 104 104 104 106 106 107 118 120 122 Series S50 50 Ohm 50 Ohm S70 70 Ohm 70 Ohm S93 93 Ohm 93 Ohm SOS 50 SOS 70 SOS 93 QC 50 QC 70 QC 93 Screw-On Slide-On Screw-On Screw-On Screw-On Slide-On Jacks and Receptacles Description Standard Gold Plated Crimp Style Feed Thru Adapter Standard Gold Plated Crimp Style Feed Thru Adapter Standard Gold Plated Crimp Style Feed Thru Adapter Standard Standard Standard Standard Standard Standard Twinax Twinax Triax LEPRA/CON Connector LEPRA/CON Connector Interlocking Interface LEPRA/CON Connector Page 96, 97 115, 116 110, 111 96, 97 115, 116 110, 111 96, 98 115, 116 110, 111 99, 102 101, 102 101, 102 103 103 103 106 106 107 118, 119 121 122, 123
128
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Cable Acceptance Dimensions Standard Connectors Screw-On Series
Straight Plugs -- Page 94
S-50 032-0021-0001 032-0023-0001 032-0025-0001 032-0033-0001 032-0097-0001 032-0098-0001 032-0155-0001 032-0156-0001 052-0213-0001 052-0235-0001 052-0235-0003 052-0370-0001 052-0542-0001 S-70 032-0010-0001 032-0022-0001 032-0067-0001 032-0078-0001 032-0222-0001 052-0092-0001 S-93 032-0011-0001 032-0017-0001 032-0066-0001 032-0071-0001 032-0092-0001 032-0099-0001 052-0200-0001 .134 3.40 .134 3.40 .154 3.91 .134 3.40 .155 3.94 .134 3.40 .134 3.40 .118 2.99 .118 2.99 .118 2.99 .118 2.99 .125 3.18 .118 2.99 .118 2.99 .100 2.54 .100 2.54 .101 2.67 .097 2.446 .107 2.72 .100 2.54 .100 2.54 .013 .330 .015 .381 .015 .381 .031 .787 .015 .381 .015 .381 .015 .381 .093 2.36 .093 2.36 .108 2.74 .108 2.74 .093 2.36 .093 2.36 .075 1.91 .075 1.91 .079 2.01 .079 2.01 .075 1.91 .075 1.91 .061 1.55 .059 1.50 .059 1.50 .061 1.55 .059 1.50 .059 1.50 .013 .330 .015 .381 .015 .381 .013 .330 .015 .381 .015 .381 .087 2.21 .087 2.21 .093 2.36 .093 2.36 .087 2.21 .087 2.21 .088 2.24 .088 2.24 .087 2.21 .087 2.21 .087 2.21 .093 2.36 .087 2.21 .061 1.55 .061 1.55 .068 1.73 .077 1.96 .061 1.55 .061 1.55 .061 1.55 .061 1.55 .061 1.55 .061 1.55 .061 1.55 .068 1.73 .061 1.55 .050 1.27 .041 1.04 .050 1.27 .047 1.00 .050 1.27 .041 1.04 .041 1.04 .041 1.04 .050 1.27 .041 1.04 .041 1.04 .041 1.04 .041 1.04 .013 .330 .015 .381 .013 .330 .015 .381 .015 .381 .015 .381 .015 .381 .015 .381 .013 .330 .015 .381 .015 .381 .015 .381 .015 .381 Connector Part No. Max. Jacket Max. Shield Max. Dielectric Max. Inner Conductor
4
129
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors
Coaxial Connectors Cable Acceptance Dimensions (Continued) Screw-On Series (Continued)
Right-Angle Plugs -- Page 95
S-50 032-0015-0001 052-0204-0001 052-0215-0001 052-0337-0001 S-70 032-0013-0001 052-0299-0001 052-0379-0001 S-93 032-0014-0001 032-0068-0001 032-0153-0001 052-0207-0001 052-0298-0001 052-0304-0022 .134 3.40 .155 3.94 .155 3.94 .134 3.40 .134 3.40 .155 3.94 .123 3.12 .118 2.99 .118 2.99 .123 3.12 .123 3.12 .118 2.99 Any Any Any Any Any Any .012 .305 .012 .305 .012 .305 .012 .305 .012 .305 .012 .305 .111 2.81 .111 2.81 .111 2.81 .074 1.88 .074 1.88 .074 1.88 Any Any Any .012 .305 .012 .305 .012 .305 .092 2.34 .092 2.34 .092 2.34 .111 2.81 .060 1.52 .060 1.52 .060 1.52 .074 1.88 Any Any Any Any .012 .305 .012 .305 .012 .305 .012 .305 Connector Part No. Max. Jacket Max. Shield Max. Dielectric Nom. Inner Conductor
Jacks -- Page 96
S-50
Connector Part No.
Max. Jacket
Max. Shield
Max. Dielectric
Max. Inner Conductor .021 .533 .021 .533 .021 .533 .021 .533 .021 .533 .021 .533 .021 .533 .021 .533 .021 .533 .021 .533
031-0033-0001 031-0034-0001 051-0467-0001 S-70 031-0036-0001 031-0048-0001 031-0090-0001 S-93 031-0032-0001 031-0037-0001 031-0088-0001 031-0089-0001
.088 2.24 .087 2.21 .079 2.01 .093 2.36 .093 2.36 .109 2.77 .134 3.40 .134 3.40 .154 3.91 .154 3.91
.061 1.55 .061 1.55 .061 1.55 .075 1.91 .075 1.91 .079 2.01 .118 2.99 .118 2.99 .118 2.99 .118 2.99
.041 1.04 .041 1.04 .041 1.04 .059 1.50 .059 1.50 .059 1.50 .100 2.54 .100 2.54 .101 2.57 .101 2.57
130
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Cable Acceptance Dimensions (Continued) Slide-On Series
Straight Plugs -- Page 100
Connector Part No. SOS-50 032-0055-0001 032-0056-0001 SOS-70 032-0060-0001 032-0061-0001 032-0087-0001 SOS-93 032-0058-0001 032-0077-0001 032-0084-0001 .134 3.40 .134 3.40 .154 3.91 .118 2.99 .118 2.99 .118 2.99 .100 2.54 .100 2.54 .101 2.57 .015 .381 .015 .381 .015 .381 .093 2.36 .093 2.36 .108 2.74 .075 1.71 .075 1.71 .079 2.01 .059 1.50 .059 1.50 .059 1.50 .015 .381 .015 .381 .015 .381 .088 2.24 .088 2.24 .058 1.47 .058 1.47 .041 1.04 .041 1.04 .015 .381 .015 .381 Max. Jacket Max. Shield Max. Dielectric Max. Inner Conductor
Right-Angle Plugs -- Page 101
Connector Part No. SOS-50 032-0063-0001 SOS-70 032-0062-0001 SOS-93 032-0059-0001 032-0083-0001
Max. Jacket
Max. Shield
Max. Dielectric
Nom. Inner Conductor .012 .305 .012 .305 .012 .305 .012 .305
.092 2.34 .111 2.82 .134 3.40 .155 3.94
.060 1.52 .074 1.88 .123 3.12 .118 2.99
Any
Any
Any Any
Jacks -- Page 101
Connector Part No. SOS-50 031-0053-0001 031-0054-0001 SOS-70 031-0095-0001 SOS-93 031-0063-0001 031-0064-0001 031-0093-0001 031-0094-0001
Max. Jacket
Max. Shield
Max. Dielectric
Max. Inner Conductor .021 .533 .021 .533 .021 .533 .021 .533 .021 .533 .021 .533 .021 .533
Coaxial Connectors
.088 2.24 .088 2.24 .108 2.74 .134 3.40 .134 3.40 .154 3.91 .154 3.91
.061 1.55 .061 1.55 .079 2.01 .118 2.99 .118 2.99 .118 2.99 .118 2.99
.041 1.04 .041 1.04 .059 1.50 .100 2.54 .100 2.54 .101 2.57 .101 2.57
4
131
South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Catalog 1308638 Revised 8-05 www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425
Coaxial Connectors Cable Acceptance Dimensions (Continued) Quick-Connect Series
Straight Plugs -- Page 104
QC-50 032-0002-0001 032-0030-0001 QC-70 032-0016-0001 032-0031-0001 032-0079-0001 QC-93 032-0012-0001 032-0032-0001 032-0072-0001 .134 3.40 .134 3.40 .154 3.91 .118 2.99 .118 2.99 .118 2.99 .100 2.54 .100 2.54 .101 2.57 .013 .330 .015 .381 .015 .381 .093 2.36 .093 2.36 .108 2.74 .075 1.91 .075 1.71 .079 2.01 .061 1.55 .059 1.50 .059 1.50 .013 .330 .015 .381 .015 .381 .093 2.36 .093 2.36 .058 1.47 .058 1.47 Any .041 1.04 .013 .330 .015 .381 Connector Part No. Max. Jacket Max. Shield Max. Dielectric Max. Inner Conductor
Right-Angle Plugs -- Page 104
QC-50
Connector Part No.
Max. Jacket
Max. Shield
Max. Dielectric
Nom. Inner Conductor .012 .305 .012 .305 .012 .305 .012 .305
032-0026-0001 QC-70 032-0027-0001 QC-93 032-0020-0001 052-0228-0001
.092 2.34 .111 2.82 .134 5.40 .155 3.94
.060 1.52 .074 1.88 .123 3.12 .118 2.99
Any
Any
Any Any
Jacks -- Page 105
QC-50
Connector Part No.
Max. Jacket
Max. Shield
Max. Dielectric
Max. Inner Conductor .021 .533 .021 .533
031-0038-0001 QC-93 031-0040-0001
.093 2.36 .134 3.40
.061 1.55 .118 2.99
.041 1.04 .100 2.54
Twinax
Plugs -- Page 106
Connector Part No. 032-0088-0001 032-0093-0001 052-0229-0001 052-0324-0001
Max. Jacket .167 4.24 .123 3.12 .123 3.12 .167 4.24
Max. Shield .142 3.60 .092 2.34 .092 2.34 .142 3.61
Max. Dielectric .061 1.55 .042 1.07 .042 1.07 .061 1.55
Max. Inner Conductor .014 .356 .014 .356 .014 .356 .014 .356
Jacks -- Page 106
Connector Part No. 051-0358-0001 051-0389-0001
Max. Jacket .167 4.24 .167 4.24
Max. Shield .142 3.60 .142 3.61
Max. Dielectric .061 1.55 .061 1.55
Max. Inner Conductor .020 .508 .020 .508
132
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Cable Acceptance Dimensions (Continued) Triax
Plugs -- Page 107
Connector Part No. 052-0130-0001 052-0138-0001 052-0593-0001 Max. Jacket .124 3.15 .183 4.65 .214 5.44 Max. Outer Shield Single Shield Single Shield Single Shield Max. Outer Dielectric .085 2.26 .146 3.71 .166 4.22 Max. Inner Shield Single Shield .118 2.99 .161 4.09 Max. Inner Dielectric .041 1.04 .107 2.72 .131 3.33 Max. Inner Conductor .014 .356 .014 .356 .020 .508
Gold Plated Crimp Style Coaxial Connectors
Straight Plugs -- Pages 113, 114
Connector Part No. 50 Ohm Series 132-0112-000* 132-0113-000* 132-0114-000* 132-0115-000* 132-0509-0002 70 Ohm Series 132-0200-000* 132-0201-000* 93 Ohm Series 132-0300-000* 132-0301-000*
Max. Jacket .088 2.24 .088 2.24 .110 2.79 .110 2.79 .116 2.95 .110 2.79 .110 2.79 .155 3.94 .155 3.94
Max. Dielectric .039 .991 .039 .991 .070 1.78 .070 1.78 .070 1.78 .070 1.78 .070 1.78 .107 2.72 .107 2.72
Nom. Inner Conductor .012 .305 .012 .305 .012 .305 .012 .305 .012 .305 .012 .305 .012 .305 .012 .305 .012 .305
Right-Angle Plugs -- Page 114
Connector Part No. 50 Ohm Series 132-0116-0002 132-0117-0002 132-0118-0002 132-0119-0002 70 Ohm Series 132-0202-0002 132-0203-0002 93 Ohm Series 132-0302-0002 132-0303-0002
Max. Jacket .088 2.24 .088 2.24 .110 2.79 .110 2.79 .110 2.79 .110 2.79 .155 3.94 .155 3.94
Max. Dielectric .039 .991 .039 .991 .074 1.88 .074 1.88 .074 1.88 .074 1.88 .107 2.72 .107 2.72
Nom. Inner Conductor .012 .305 .012 .305 .012 .305 .012 .305 .012 .305 .012 .305 .012 .305 .012 .305
4
133
South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors
Catalog 1308638 Revised 8-05 www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425
Coaxial Connectors Cable Acceptance Dimensions (Continued) Gold Plated Crimp Style Coaxial Connectors (Continued)
Jacks -- Page 115
Connector Part No. 50 Ohm Series 131-0134-0001 131-0135-0001 131-0136-0001 131-0137-0001 70 Ohm Series 131-0200-0001 131-0201-0001 93 Ohm Series 131-0300-0001 131-0301-0001 .155 3.94 .155 3.94 .107 2.72 .107 2.72 .012 .305 .012 .305 .110 2.79 .110 2.79 .070 1.78 .070 1.78 .012 .305 .012 .305 Max. Jacket .088 2.24 .088 2.24 .110 2.79 .110 2.79 Max. Dielectric .039 .991 .039 .991 .070 1.78 .070 1.78 Nom. Inner Conductor .012 .305 .012 .305 .012 .305 .012 .305
LEPRA/CON Connectors
All -- Pages 118-126
Connector Part No. All
Max. Jacket .081 2.06
Max. Dielectric .040 1.02
Nom. Inner Conductor .012 .305
134
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Hermetic Connectors Coaxial Screw-On, Slide-On Series Material and Finish
50 Connector uses 10-32 thread. 70 Connector uses 12-32 thread. 93 Connector uses 1/4-32 thread. Housing (1) -- Cold rolled steel silver plate. Gasket (2) -- Neoprene or silicone rubber. Insulator (3) -- TEFLON. Glass Seal (4) Center Contact (5) -- Nickel Iron alloy contact with slotted turret type solder pot (other terminations available).
Service and Performance Data
Temperature Range -- -65F to 450F [-54C to 232C] . Electrical -- 750 VAC working voltage. Performance -- 1200 VAC test at sea level. Insulation Resistance -- 5000 megohms at 500 VDC (room temperature). Shock -- 100 G's minimum. Pressure -- 100 PSI minimum. Leak Rate Per Seal -- Less than 1.04 x 10-8 cc/sec. (.001 Micron cubic ft/hr) of 100% helium tested at one atmosphere pressure differential far exceeding requirements of MIL-C-26500 and MIL-C-26482. Plating -- Silver unless otherwise specified.
X
Bulkhead Solder Mount
A .281 [7.14] .125 [3.18] X D
.125 [3.18]
A
.25 [6.35] D
OC OB
.438 [11.13]
X OC D Y
OC OB
OB
.125 Typ. [3.18]
.438 [11.13] A
Fig. 1 Part No. 051-0049-0001 051-0056-0001 053-0228-0001 051-0315-0001 Fig. 1 1 2 3 A .563 14.30 .563 14.30 .594 15.09 .656 16.66
Fig. 2 B Dia. .25 6.35 .313 7.95 .25 6.35 .25 6.35 C Dia. .015 .200 5.08 .251 6.38 .227 5.77 .195 4.95 D .125 3.18 .125 3.18 .234 5.94 .063 1.60
Fig. 3 X* S-50 S-93 S-50 S-50 Y* -- -- S-50 --
* "S" indicates Screw-On Series Dimensions are subject to change without notice.
Coaxial Connectors
Bulkhead Solder Mount, Panel Insulated
A
A .328 [8.33]
Glass Seal
A
O .203 [5.16]
X OC Y OB
OB
C
X
Y
B
X
Y
OC
D .063 [1.60]
.125 [3.18]
.047 [1.19] D
.063 [1.60]
Glass Seal
.047 [1.19]
.063 [1.60]
Fig. 1 Part No. 051-0232-0001 053-0227-0001 053-0412-0001 053-0028-0001 Fig. 1 2 2 3 A .563 14.30 .609 15.47 .609 15.47 .609 15.47
Fig. 2 B Dia. .406 10.31 .625 15.88 .625 15.88 .625 15.88 C Dia. .370 9.40 .540 13.72 .540 13.72 .540 13.72 D .172 4.37 .297 7.54 .297 7.54 .297 7.54
Fig. 3 X* S-50 S-50 S-93 SOS-50 S-50 S-93 S-50 Y*
4
135
* "S" indicates Screw-On Series; "SOS" indicates Slide-On Series Dimensions are subject to change without notice.
Catalog 1308638 Revised 8-05 www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Dimensions are shown for reference purposes only. Specifications subject to change.
USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425
South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967
Coaxial Connectors Hermetic Connectors (Continued) Coaxial Screw-On, Slide-On Series
(Continued)
G .094 [2.38] A
Microminiature Coaxial Receptacles
BX Hex.
Y
M
D
H
C Thd. E F
Mounting Hole
Part No. 053-0455-0001 053-0636-0001
A .688 17.46 .922 23.42
B Hex. .563 14.29 .625 15.88
C Thd. 5/16-32 UNEF-2A 3/8-32 UNEF-2A
D .297 7.54 .344 8.73
E .094 2.38 .078 1.98
F .203 5.16 .203 5.16
G .25 6.35 .438 11.11
H .312 7.92 .375 9.53
M .291 7.39 .347 8.81
X* S-50 S-93
Y* S-50 S-93
* "S" indicates Screw-On Series Dimensions are subject to change without notice.
Solder Mount Slide-On Series Receptacles
X
A
OC
OB
E D
Part No. 051-0134-0001 051-0158-0001
A .563 14.29 .563 14.29
B Dia. .375 9.53 .25 6.35
C Dia. .015 .309 7.85 .200 5.08
D .172 4.37 .125 3.18
E .031 .794 .047 1.19
X* SOS-50, 70, 93 SOS-50, 70, 93
* "SOS" indicates Slide-On Series Dimensions are subject to change without notice.
Single Hole Mount Receptacles
A D .094 [2.38]
X
B Hex.
H
C Thd. E F
Mounting Hole
Part No. 051-0249-0001 051-0154-0001
A .563 14.29 .656 16.67
B Hex. .375 9.53 .625 15.88
C Thd. 12-32 UNEF-2A 3/8-32 UNEF-2A
D .078 1.98 .156 3.97
E .109 2.78 .078 1.98
F .234 5.95 .203 5.16
H .218 5.54 .375 9.53
X* S-50 S-93
* "S" indicates Screw-On Series Dimensions are subject to change without notice.
136
Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967

▲Up To Search▲

Price & Availability of 5-1532137-5

	To Download 5-1532137-5 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .